Brizgalni stroji - večbarvni

Haitian Haitian ZE 1200III-300-V80 + Hilectro XTD-1100ID, 2021

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TET351P5-offAD-Bypass - 2200373733, hladilna zmogljivost: 66 kW (89,73 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 1.082 kg, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): −5 °C, vhodna napetost: 400 V, pritisk: 6 letvica, temperatura: 7 °C, volumenski pretok: 11,2 m³/h, tlak črpalke: 4,68 letvica, skupna širina: 866 mm, skupna dolžina: 2.250 mm, skupna višina: 2.054 mm, trajanje garancije: 3 meseci, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Process Chiller / Air-Cooled Water Chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, Water Chiller; Cooler TAEevo Tech 351 P5-offAD-Bypass units are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Cedpfowlt Rasx Afnjpw Special features: - Open filling system/tank attached - Bypass with manual valve between water inlet and outlet Chilled water outlet temperature adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3, Max. power consumption (kW): 39 Max. current (A): 68 Starting current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial No.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technically OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual defects due to use. (Subject to technical changes and prior sale!)

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Cpedpfx Aohigmbsfnjw Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar spacing: 420 x 420 mm Min./max. mould installation height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Cpodpju E E Susfx Afnjw Injection moulded part weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Injection moulded part weight: 97 g/PS Control system: SELGOCIA Equipment: - 3 core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year: 2010 - Conveyor belt - Safety fence

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Closing force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Tie bar spacing: 221 mm Distance between mounting plates: 350-500 mm Mould mounting plates (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748 Cpsdpfx Afeuykh Dsnsw

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Two complete injection molding production lines with two Husky injection molding machines, five complete molds with metal separators, Motan gravimetric dosing systems, and crane systems are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2,424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s–12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s–15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s–11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s–14s. Cpodpfx Asw Az Rijfnjw 6) 48-cavity H-PET-AE mold. Overall system dimensions (LxWxH): approx. 24m/13m/5.5m. Includes drying unit, mold dehumidification, color dosing equipment, and T-belt conveyor. Documentation available. On-site inspection possible.

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Na voljo sta dva stroja BOY 55M, letnik 2005. Zapiralna sila: 550kN, premer polža: 38mm, vbrizgalni volumen: 196cm³, vbrizgalni tlak: 2000bar, dimenzije plošč: 565mm/540mm, razmak stebrov: 360mm/335mm. Min./maks. višina obdelovanca: 250mm/650mm, hod odpiranja: 400mm, maks. razmik plošč: 1050mm, hod izmetalca: 80mm, maks. teža orodja: 600kg. Dimenzije X/Y/Z: pribl. 3300mm/1200mm/2100mm, teža: pribl. 2300kg, delovne ure: 29664h, krmiljenje: Procan MD. Vključno z robotskim vmesnikom Euromap 12. Cpsdpetyaypofx Afnsw

Stanje: zelo dobro (rabljeno), Boy 80M Baujahr 1998 Schließkraft: 80 Tonnen Schneckendurchmesser: 36 mm Schussgewicht: 132 g Holmenabstand: 410 x 358 mm Cedpfjmt Hh Eox Afnopw

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 24.210 h, This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in the machine storage facility. The machine is from 2007 and has relatively low operating hours for its age. Csdpfx Afotpf N Uenepw – Brand: Dr. Boy – Model: 55M – Year of manufacture: 2007 – Screw diameter: 32 mm – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: električni, barva: srebrn, skupna masa: 2.460 kg, tip droga: teleskopski, Leto izdelave: 2022, obratovalne ure: 21 h, številka stroja/vozila: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. Yet, there’s no question that it also handles “big” jobs, delivering impressive performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane is equipped as standard with non-marking tires that do not chalk. The crane’s 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, operates for 8 hours without the need for recharging. The boom is proportionally extendable and can be further lengthened with an optional jib extension. JMG MC 25S - Lifting capacity: 2,500 kg - Net weight: 2,460 kg Cpedpfsw S Ii Nex Afnjw - Width: 900 mm - Height: 1,600 mm - Drive: Electric - Power: 4 kW - Tires: Solideal Magnum - Hydraulic winch - Telescopic boom - Counterweights - Battery: 24 V 420 Ah - Automatic braking system - Front-wheel drive – 2 gears - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle: +60° / -15° - Ground clearance: 70 mm - Front tires: 18 x 7-8 - Rear tires: 15 x 4.5-8 - Operating manual - Electric motors – insulation class H

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Cpodpfx Ajlz Rvlofnjw Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.