Stroj za izdelavo vijakov

Hilgeland ME2 VM

Stanje: rabljeno, Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M02L/7787, Ponudbena številka: M02L/7787 Tip stroja: Stroj za obrezovanje robov Proizvajalec: HILGELAND Tip: ME2VM Leto izdelave: 1983 Iodpfxowi S Rys Af Toht Območje premerov: 2,2-8 mm Dolžina stebla pod glavo: 6-40 mm Učinkovitost kosov/min: 250 Dolžina redukcije: 22 mm Lokacija: Na zalogi pri nas

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Manufacturer: Greif Velox Year of manufacture: 2020 Model: BVP Grain sizes: 30 μm - 5 mm Bag size: 9.5 - 30 kg Bags: up to 250/h Packaging: Paper valve bags, PE, PP fabric Fully automatic single-spout system with bag feeder, 500-liter pre-hopper, dust extraction without collection bin, control panel 1x conveyor belt 650 x 2,000 mm Isdpfxowcfwyo Af Teht

Leto izdelave: 1985, Stanje: pripravljen za uporabo (rabljen), Table dimensions: 1435x460 mm, Number/Width/Spacing: 5/16/80 mm, Control: TNCi-120, Length: 1435 mm, Width: 2330 mm, Height: 1648 mm, Weight: 3.1 t, comes with documentation, accessories available, no known defects, on-site inspection possible. Ihedpfelbmupex Af Tst

Leto izdelave: 2008, obratovalne ure: 9.750 h, Stanje: rabljeno, M2 GmbH offers you the following machine: - Piling and drilling rig RTG RG 25S Iodpfxjh Tyz As Af Tsht - Upper carriage: Sennebogen BS 80 R - Engine: CAT C18, 570 kW - Optional: Vibratory hammer MR 125 V, rotary drive KDK 232 S, double head system DKS 100/200 - Features: Vibratory installation, Kelly drilling, and SOB drilling The machine is in excellent condition and immediately ready for operation.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Isdefgyicspfx Af Teht Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: rabljeno, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i-T ASA 5 Main spindle power: 15 kW Self-centering chuck diameter: 175 mm ASA 5 spindle mount Ihodpoqn E U Tsfx Af Tot Bar capacity: 52 mm Turning diameter: 230 mm Turning length: 500 mm Max spindle speed: 5000 rpm Number of tool turrets: 1 Number of tool stations in first turret: 12 Number of driven tools in first turret: 12 First turret tool mounting type: VDI 30 X axis travel: 160 mm Y axis travel: +/- 32 mm Z axis travel: 550 mm Rapid traverse (X/Y/Z): 30 m/min Sub-spindle: yes ASA 5 spindle nose Max sub-spindle speed: 5000 rpm Sub-spindle power: 9 kW Sub-spindle bar capacity: 30 mm Bar feeder make and model: LNS with single guide tube Chip conveyor: belted Presetting: yes Year: 2000 The machine is available under power in our warehouse in Gussago (BS), Italy. Mimu Machine Tools Italy

Stanje: zelo dobro (rabljeno), Leto proizvodnje: 1991 Model: ITPS III Serijska številka: ITPS 80C 25 P1C226 Maksimalna stisna sila: 1800 kN Delovni hod: 115 mm Napajanje: 415 V, 50 Hz, 3 faze Nazivni tok: 119 A Ihodpewq Dpqsfx Af Tst Vgrajena moč: 18,5 kW Teža stroja: 4940 kg Inventarna številka: 9.14 Krmiljenje: Delem DA-65R Stroj se vklopi, vendar krmiljenje ne reagira na ukaze. Prejšnji uporabnik je zamenjal originalno krmiljenje AMADA z DELEM.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988,

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Ihedst Hwzijpfx Af Tjt Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 1965, Stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Isdpfjcubatjx Af Tjht Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available