HAAS VF-10/50

HAAS VF-10/50

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² Dcsdpjyv In Isfx Abgji T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, Travels Longitudinal (X): 2500 mm Dsdpfx Aoykbxzebgoci Vertical (Y): 1250 mm Transversal (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100% duty cycle, 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed range X, Y, Z axes: 10 – 10000 mm/min Rapid traverse X, Y, Z: 25000 mm/min Machine weight: approx. 15000 kg Equipment: - Internal coolant supply according to DIN 69871 Form AD including minimum quantity oil lubrication with 15 different dosing levels activated by M functions (programmable): 20 bar - NC rotary table, size 1000 x 1000 mm as 4th axis integrated into machine control. Max. workpiece load 5000 kg, positioning accuracy ± 5", table surface with 22 T-slots - Chip conveyor for TA-D 25 - Tool changer Accessories - Front-positioned, movable operator panel with Heidenhain iTNC 530 control (single processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head / 2 planes, 2.5° increments (H200) (option) - Distance from spindle nose to table edge: 250 mm - NC rotary table, size 1000 x 1000 mm, as 4th axis integrated into machine control. Max. workpiece load 5000 kg, positioning accuracy ± 5", table surface with 22 T-slots. - Coolant system with 150 l tank capacity, pump pressure 5 bar, delivery rate 50 l/min, outlet via ring nozzle around machine spindle - Fully enclosed splash guard cabin with sliding doors at the front, additional sliding door on the left column side, and viewing windows on all 4 sides - Heidenhain drive motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system by Heidenhain on all axes - Telescopic covers on X-axis guides - Precision ball screws on X, Y and Z axes - Automatic cycle lubrication for all axes and moving components - Electrical equipment by Siemens - Hydraulic unit by Vickers

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.150 mm, pomik osi Y: 1.850 mm, pomik po osi Z: 1.000 mm, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 24 m/min, največja hitrost vretena: 24.000 obr/min, vrtilni moment: 87 Nm, CNC Fidia C20 WORKING AREA X-axis longitudinal travel: 3,150 mm Y-axis transverse travel: 1,850 mm Z-axis vertical travel: 1,000 mm MAXIMUM AXIS SPEED X and Y axes rapid traverse: 30 m/min Z axis rapid traverse: 24 m/min WORKPIECE TABLE Clamping surface: 3,000 x 1,600 mm Maximum permissible load: 5,000 kg/m² T-slots: - 8 longitudinal H12 + 1 H8 - Width: 22 mm - Pitch: 160 mm ELECTROSPINDLE: Maximum power (S6 60%): 55 kW Spindle speed range: 240 ÷ 24,000 rpm Constant power range: 6,000 ÷ 24,000 rpm Maximum torque: 87.5 Nm Tool holder: HSK – A63 C-axis stroke: ± 200° C-axis speed: 2,000 °/min C-axis offset from spindle axis: 75 mm A-axis stroke: +95° / -110° A-axis speed: 2,000 °/min Max. distance spindle nose – table surface: 1,175 mm Machine equipped with: • 24-position tool magazine • Remote electronic handwheel Dcodpfx Aeyw Tddjbgoi • HMS head calibration system • Various auxiliary equipment supplied with the machine • Operation and maintenance manual and CE declaration of conformity

Stanje: rabljeno, Leto izdelave: 2002, Technical details: X travel: 505 mm Y travel: 405 mm Z travel: 405 mm Measuring range X-axis: 505 mm Measuring range Y-axis: 405 mm Measuring range Z-axis: 405 mm Compressed air: 0.4 MPa Voltage: 100/120/220/240 V / Hz Dedpfx Abou S Izcjgjci Total power requirement: 700 watts Machine weight approx.: 0.5 t Machine dimensions approx. LxWxH: 1.1 x 1.1 x 2.185 m Additional features: - This is a linear measuring system with a resolution of 0.0001 mm - Measuring speed X/Y+Z axes: 430 mm/s - Acceleration X/Y+Z axes: 980 mm/s² - Granite measuring table, size LxW: 638 x 860 mm, with workpiece clamping - Maximum tool size: height max. 545 mm, weight max. 180 kg Equipment: - Renishaw TP200 touch probe - Fujitsu - Siemens Scenic P computer; protection rating IP30 - Without measuring insert - Software available (USB stick)

Stanje: rabljeno, Leto izdelave: 2012, x-pot: 2134 mm y-pot: 1016 mm z-pot: 762 mm CNC-krmiljenje: HAAS CNC Velikost mize: 2134 x 914 mm Najv. obremenitev mize: 1814 kg Vpenjalo vretena: SK 50 Hitrosti vretena: 7500 vrt/min Pogonska moč vretena: 22,4 kW Podajalno območje: 1270 mm/min Hitri pomik: 15,2 m/min Dcedpfox E Dn Nex Abgsi Menjalec orodij: 30 pozicij Sistem za dovod hladilne tekočine: IKZ Obratovalna napetost: 400 V Teža stroja: pribl. 13,2 t Potreben prostor: pribl. 4,70 x 2,95 x 2,99 m - Tovarniška št.: 1099476 - Leto izdelave: 11/2012 - Interni dovod hladilne tekočine skozi vreteno - 5-osna nadgradnja z dodatno nagibno rotacijsko mizo TR310 (kot nova) CENA ZA STROJ BREZ NAGIBNE ROTACIJSKE MIZE TR310: 82.000,- EUR + DDV.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Glavni pogon Hitrost vretena: 7500 min⁻¹ Moč motorja vretena: 22,4 kW Pomiki Pomik X-osi: 2134 mm Pomik Z-osi: 762 mm Dedpfx Aex Imrpsbgsci Pomik Y-osi: 813 mm Ta 3-osni obdelovalni center HAAS VF 7/50 je bil izdelan leta 2017 in ponuja dolge pomike osi: X – 2134 mm, Y – 813 mm, Z – 762 mm. Največja dovoljena masa obdelovanca je 1814 kg, maksimalna hitrost vretena je 7500 min⁻¹. Odličen za zahtevna rezkalna dela. Izkoristite priložnost za nakup HAAS VF 7/50 vertikalnega obdelovalnega centra. Za več informacij o stroju nas kontaktirajte. Vrsta uporabe Rezkanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 1.626 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, največja hitrost vretena: 7.500 obr/min, moč vretenovega motorja: 15.000 W, število osi: 3, To 3-osno vertikalno obdelovalno središče HAAS VF-8 je bilo izdelano leta 2003. Ima obdelovalno območje 1626 x 1016 x 762 mm, moč vretena 15,4 kW in maksimalno hitrost vretena 7500 min⁻¹. Opremljeno je z BT-40 držalom orodja, menjalnikom orodij z 24+1 pozicijami ter polžnim transporterjem odrezkov. Če iščete kakovostni rezkalni stroj, razmislite o stroju HAAS VF-8, ki ga ponujamo v prodajo. Kontaktirajte nas za dodatne informacije. Dedpfjx D H Rusx Abgjci Tehnične specifikacije Stožec BT 40

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.750 mm, pomik osi Y: 1.870 mm, pomik po osi Z: 700 mm, skupna dolžina: 9.000 mm, dolžina mize: 4.000 mm, širina mize: 1.650 mm, skupna širina: 3.500 mm, največja hitrost vretena: 6.000 obr/min, skupna višina: 3.500 mm, razdalja med stojali: 2.300 mm, največja hitrost vrtenja: 6.000 obr/min, skupna masa: 30.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, X-os: 3.750 mm Y-os: 1.870 mm Z-os: 700 mm CNC krmiljenje: Heidenhain iTNC 530 Vpenjalna glava: ISO 50 Obrati vretena: 6.000 min⁻¹ Menjalnik orodij: 30 mest Dimenzija mize: 4.000 x 1.650 mm Razmak med stebri: 2.100 mm Opremljen z: - Kotna rezkalna glava - Tipalna sonda - Notranje hlajenje vretena - Dvojni odstranjevalci ostružkov - Hladilna naprava - Navodila za uporabo Država porekla: Tajvan Dimenzije stroja (DxŠxV): 9.000 x 3.500 x 4.000 mm +/- Teža stroja: 30.000 kg Dedpjyac T Esfx Abgoci

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, število osi: 3, To 3-osno vertikalno obdelovalno središče HAAS VF-8 je bilo izdelano leta 2006. Deluje pri napetosti 360–480 V, trifazno in frekvenci 50/60 Hz. Nazivni tok pri polni obremenitvi znaša 20 A, največji tok pa je 35 A. Razmislite o nakupu tega vertikalnega obdelovalnega centra HAAS VF-8. Za dodatne informacije nas kontaktirajte. • Napetost: 360–480 V • Faza: 3 • Frekvenca: 50/60 Hz Dodpfx Abox D Ep Ajgjci • Tok pri polni obremenitvi: 20 A • Največji tok: 35 A • Notranje hlajenje: 21 bar • Spiralni transporter za ostružke • Programabilna šoba za hladilno tekočino • Vgrajen nov menjalnik in vreteno V juniju in juliju 2024 so bili obnovljeni naslednji sklopi: • Menjalnik • Vektorski pogon, pogon vretena December 2024: Dvojni ročni menjalec orodja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 14.982 h, Funkcionalnost: popolnoma funkcionalen, Haas VF-8/40, letnik 2008 Stroj je bil kupljen leta 2008, je delujoč in se lahko normalno uporablja. Dcjdpfxexcvz Hs Abgei Vsa orodja in dodatna oprema so priloženi. Ostale tehnične podrobnosti so razvidne iz priloženih slik. Ob zanimanju je možen dogovor za ogled.