CNC stružnica

Haas ST-30

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Ponujamo vam: Proizvajalec: Haas Tip: ST-30Y Leto izdelave: 2019 Krmiljenje: Haas Tehnični podatki: Maks. premer vrtenja: 533 mm Maks. premer obdelave (z BMT 65): 349 mm Razdalja med konicama: 826 mm Premer prehoda skozi palico: maks. 76 mm Hodi: x-os: 239 mm y-os: +/- 51 mm z-os: 826 mm Glavno vreteno: Hitrost vretena: 3.400 obr/min Pogonska moč: 22,4 kW Revolver za orodje: Število orodnih mest: 12 pozicij Vpenjalna glava za orodja: BMT 65 Pomiki: Hitri pomik (x, y, z): 12 / 12 / 24 m/min Tehnične lastnosti & dodatna oprema: Djdeyzz Urspfx Apleut - Pogonska orodja (c-os) - Avtomatska roka za prednastavljanje orodja - Rezervoar za hladilno tekočino - Črpalka za hladilno tekočino - Transporter za ostružke - Vpenjalna glava 254 mm - Konjiček Dodatna oprema, prikazana orodja in vpenjalne naprave so vključeni v obseg dobave samo, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter prodaja pod vmesno pridržana!

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor Dedpfx Asrqwbieplsut ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 3.400 obr/min, potovalna razdalja osi X: 239 mm, pomik osi Y: 51 mm, pomik po osi Z: 826 mm, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis HAAS ST-30Y horizontal lathe was manufactured in 2022. It features a 10-inch chuck, a maximum turning diameter of 13.75 inches, and a turning length of 32.5 inches. The machine is equipped with a BMT-65 turret with 12 stations and speeds of up to 4,000 rpm for live tooling. The Y-axis enables off-center milling, drilling, and threading. Take advantage of this opportunity to purchase the HAAS ST-30Y horizontal lathe. Contact us for further information. • Chuck size: 10 inches (≈254 mm) • Maximum bar capacity (through spindle): 3 inches (≈76 mm) • Maximum swing over front apron: 31.75 inches (≈806 mm) • Maximum turning diameter: 13.75 inches (≈349 mm) with BMT65 turret • Maximum turning length: 32.5 inches (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 inches (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-center milling, drilling, and threading • Coolant capacity: 55 gal (~208 L) • Air supply requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195-260 V (depending on region) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment: • Live tool holders (under power) • Various tool holders • Liners Duedpfx Apjyw N Dtjlot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Haas ST 30 Leto izdelave 2012 Programabilen konjiček Dedpfxeyyy Sas Aplsut

Stanje: dober (rabljeno), Leto izdelave: 2000, CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electromagnetic chuck with continuous crosswise pole division Dimensions: 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine tray included. Complete machine documentation available. Dujdofrbckopfx Apljt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, največja hitrost vretena: 3.400 obr/min, število osi: 4, Ta 4-osni horizontalni stružni stroj HAAS ST-30Y je bil izdelan leta 2020. Opremljena je z osmi C+Y, A2-6 vretenom z 3.400 vrt./min in BMT65 revolversko glavo z 12 postajami. Stroj ima avtomatski pripravnik orodij, ukrivljen transporter odrezkov in programirljivo konjiček. Stroj je mogoče ogledati pod napetostjo, preizkusni rezi so možni na zahtevo. Za več podrobnosti nas kontaktirajte. • Delovne ure: 556 h • Os C+Y • A2-6 vreteno z 3.400 vrt./min • 12-postajna revolverska glava BMT65 • Programirljiv konjiček Dodatna oprema: • Ukrivljen transporter odrezkov • Oljni strgalo • Odsesovalna naprava • Avtomatski pripravnik orodij (ATP) • WIFI kamera • Daljinsko upravljan ročaj Dusdpfxeyh Hw Io Aplot

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Krmilna enota Dujdjx H Uz Aepfx Apljt Znamka: HAAS Ta 3-osni horizontalni stružni stroj HAAS ST-30 je bil izdelan leta 2011. Opremljen je z 10" vpenjalno glavo, 3400 obr/min vretenom, podprto z gnanimi orodji z osjo C, merilnikom orodja in transporterjem. Vključuje tudi revolversko glavo 12 x VDI40 in konjiček. Če iščete visokokakovostne zmogljivosti struženja, razmislite o HAAS ST-30, ki je na voljo pri nas. Za dodatne informacije nas kontaktirajte. Vrste uporabe Struženje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 11.111 h, največja hitrost vretena: 4.000 obr/min, proizvajalec krmilnikov: HAAS, model krmilnika: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal lathe featuring a 210 mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum workpiece capacity of 330 x 572 mm and bar diameters up to 64 mm, making it ideal for precision turning operations. Contact us for further information regarding this machine. Additional equipment • Additional options: Driven tools with 4,000 rpm and C-axis, 12 station BMT65 turret, automatic tool presetter arm • Features: Hinged belt chip conveyor, parts catcher Dsdpfxox D Ezfj Apleut • Coolant system: 208L coolant tank, variable coolant flow • Other features: Visual part programming system (1 GB), hydraulically actuated 210 mm chuck A2-6, early power failure detection module, synchronized tapping, safe operation, control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional features: Macros, SOM Advantages of the machine Technical advantages of the machine • Maximum capacity: 330 x 572 mm / bar diameter range: 64 mm • Type: VDI turret with 12 tool stations • Type: programmable hydraulic tailstock • Prepared for robot integration / driven tools Chip conveyor and tool measurement systems are included. OPTIONAL: Tool holders available at extra cost. See attached images.

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Opis: Duodpfx Apjyr Spyslst Stroj je v zelo dobrem tehničnem stanju, po predhodnem dogovoru možnost preizkusa.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Rabljena avtomatska hidravlična tračna žaga za kovino MEP SHARK 332 NC EVO Dimenzije lista: 3320x27x0,9mm Kot reza: od 45° do +60° Načini delovanja: ročni, polavtomatski-dinamični, polavtomatski, avtomatski Rezalna hitrost: 15-100m/min (inverter) Kapaciteta reza: pri 0° - okroglo 300mm - kvadrat 260mm - pravokotnik 330x260mm Dimenzije: 2600x2320x2000mm Leto izdelave: 2011 Teža: 1050kg Duodpfsul Svlsx Aplst Stroj je v celoti obnovljen in testiran.