Horizontalni strojni center

HAAS EC-1600 YZT

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), DMG PH 150-8, leto izdelave 2014, z paletami. Na voljo je zaslon na dotik. Naprava je v odličnem stanju. Tsdpfx Aoin Dklenpsd

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: Tedpfsr A Hcbjx Anped • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, proizvajalec krmilnikov: MAZATROL, model krmilnika: MATRIX, Ta 3-osni horizontalni stružnica Mazak QTN 250 M X 1000 je bila izdelana leta 2010. Če iščete visokokakovostno stružnico, priporočamo, da razmislite o stroju Mazak QTN 250 M X 1000, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Tsdpfsyalpcsx Anpjd Prednosti stroja Tehnične prednosti stroja • Največja zmogljivost: 640 • Hitrost hitrega pomika osi X: 36.000 / hitrost hitrega pomika osi Z: 36.000 / hitrost hitrega pomika osi C: 555 • Maksimalen obdelovalni premer: 380 • Maksimalna obdelovalna dolžina: 600 • Kapaciteta palice: 76 • Mere samocentrirnega vpenjala (glavno vreteno): 250 • Hod: 1000 / konus: CM 4 • Rezervoar za hladilno tekočino: 300 l

Stanje: dober (rabljeno), Leto izdelave: 2003, Vsi deli, prikazani z roko, niso priloženi. Tehnične podrobnosti so prikazane na sliki. Tedpfjyyniasx Anpjd

Stanje: rabljeno, Leto izdelave: 1998, Grinding length 2000 mm Grinding width 600 mm Total power requirement 17 kW Machine weight approx. 10 t O F F E R We are pleased to offer you—subject to prior sale and errors—ex stock: GEIBEL & HOTZ CNC Cycle-Controlled Surface and Profile Grinding Machine Model FS 2060 - GT SL Year 1998 Serial no. 1013220998 _____ Maximum grinding length (max. table longitudinal movement 2,050 mm): 2,000 mm Maximum grinding width (max. cross movement 600 mm): 600 mm Maximum grinding height under the wheel: approx. 600 mm Table-to-spindle center distance min. / max.: 180 – 800 mm Table size: 2,300 x 550 mm Magnetic chuck size: 2,000 x 600 mm Maximum table load: 3,110 kg Table speed: 0 – 35 m/min Intermittent cross feed: 0.5 – 60 mm/stroke Cross rapid traverse: 0 – 4,000 mm/min Standard grinding wheel size: 400 x 100 x 127 mm Infinitely variable grinding spindle speeds: 1,000 – 3,000 rpm Grinding spindle drive approx.: 11 kW Total drive approx.: 25 kW - 400 V – 50 Hz Weight approx.: 9,500 kg Tedjv S Ip Eepfx Anpsd Accessories / Special Equipment: • Dialog-guided GEIBEL & HOTZ automatic grinding cycle control Type SL for 3 axes. Graphic input support for data entry either as absolute values or via teach-in process for pre-programmed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and clear monitoring of axis movements and work progress. • Electronic handwheel for 3 axes X, Y, Z with selectable feed increment: 0.01 / 0.1 / 1 mm/rev. • Table movement via roller-ring screw drive (GT), enabling both very high and very low table speeds with constant torque and very high efficiency. • Cross and vertical movements via ballscrew drive with incremental glass scale encoder. • Single-point diamond dresser mounted on the table. (Previously equipped with an electric straight-line dressing device EGA 100, but this is currently not present.) • MPM fully automatic balancing device AB 100 (flange-mounted sensor currently missing). • Fine-pole electromagnetic chuck 2,000 x 600 mm with adjustable holding force. • Wet grinding equipment with universal paper belt filter system UPF 100 with magnetic separator. • Fully enclosed work area with electrically monitored sliding doors. • Separate control cabinet, separate mobile control panel, various accessories, operating manuals. Condition: Good to very good! Suitable for all grinding applications! A video of the machine will be available here soon. Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 2005, Mazak Integrex 300 - III stružno-rezkalni center, Leto izdelave 2005, Krmiljenje CNC 640 MT, Pomiki X/Y/Z 630/230/1.585 mm, B-os: NC vrtljiva glava -30°/+195°, Magazin za 80 orodij Capto, Glavno vreteno 26 kW, C-os: 0,001°, Konika MK 5, Visokotlačno hlajenje 70 bar s filtrirnim sistemom, Tooleye, Paket za simultano 5-osno obdelavo, Mazak nadzorni sistem, Tsdpfsyzfr Ijx Anped Transporter ostružkov,

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), 600 KG 10 BAR Tedexy Ikbspfx Anpsd

Stanje: rabljeno, Leto izdelave: 2007, Turning length: 2,500 mm Control: Sinumerik 840 D Spindle nose: A 11 Number of tools: 48 Swing diameter over cross slide: 750 mm Swing diameter over bed: 780 mm C-axis: 0.1–30 rpm Quill diameter: 160 mm Internal taper: MK 5 Todpfowwarujx Anpsd Maximum tool length: 500 mm Maximum tool weight: 15 kg Machine weight: approx. 27 t Space requirements: approx. 8.4 x 4.0 x 2.5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over cross slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle nose as per DIN 55026: A 11 Bar capacity: 123 mm Front bearing diameter: 200 mm Oriented spindle stop: 0–359 degrees Drive power at 100/60% duty cycle: 37/45 kW Total speed range: 10–2,500 rpm Number of speed ranges: 2 Speed range I: 10–775 rpm Speed range II: 20–2,500 rpm Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm)

Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, distance between centers: 1000mm, machining length: 980mm, feed rate: 8m/min, bed width: 433mm, tool stations: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection possible. Tjdpfx Aowynvtenpjd

Stanje: pripravljen za uporabo (rabljen), Pozdravljeni, tukaj vam ponujamo rabljene vpenjalne glave Erowa Powerchuck s paletami. Pri nas so bile očiščene in pregledane. Dodatno je bil opravljen tudi test delovanja. Vpenjalne glave imajo običajne znake uporabe, vendar so tehnično v dobrem stanju. Možen je tudi nakup posamezne vpenjalne glave. Na voljo je širok izbor palet. Imate glede tega kakšno vprašanje? Če da, vam z veseljem pomagamo. Možna je tudi dostava. Todjiq Iy Iopfx Anpjd