HAAS DS30Y

HAAS DS30Y

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 2.408 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 239 mm, pomik osi Y: 102 mm, pomik po osi Z: 584 mm, moč vretenovega motorja: 22.400 W, skupna masa: 5.534 kg, število osi: 4, Ta 4-osna horizontalna stružnica tipa HAAS DS30Y je bila izdelana leta 2023. Ima največji premer nihanja obdelovanca 533 mm in največji premer struženja 349 mm. Stroj je opremljen z robustnim revolverjem s 12 orodji, kar zagotavlja visoko prilagodljivost pri uporabi. Če iščete visokokakovostne zmogljivosti struženja, priporočamo, da razmislite o naši prodajani napravi HAAS DS30Y. Za več informacij nas kontaktirajte. • Zmogljivosti: • Velikost vpenjalne glave (glavna glava): 10,0 in / 254 mm • Maks. nihaj obdelovanca: 21,0 in / 533 mm • Maks. premer struženja (z BMT65 revolverjem): 13,75 in / 349 mm • Maks. dolžina struženja (odvisno od vpenjanja obdelovanca): 32,5 in / 826 mm • Premer preboja palice: 3,00 in / 76 mm • Razdalja med konicami: 32,5 in / 826 mm • Hitrosti podajanja (hitri pomik): • X: 472 ipm / 12,0 m/min • Y: 472 ipm / 12,0 m/min • Z: 945 ipm / 24,0 m/min • Pogoni osi (najv. potisna sila): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Glavna vretena: • Nos vretena: A2-6 • Pogonski sistem: Direktni pogon, jermenski pogon • Maks. navor: 275 ft-lbf pri 500 o/min / 373 Nm pri 500 o/min • Preboj skozi cev izvlečnega droga: 3,0 in / 76 mm • Premer preboja vretena: 3,50 in / 88,9 mm • C-os glavnega vretena: • Maks. število vrtljajev: 60 o/min • Največja nazivna moč: 5,0 hp / 3,7 kW • Natančnost pozicioniranja (±): 0,01° • Premer zavore: 13,9 in / 353 mm • Zavorni moment: 250 ft-lbf / 339 Nm • Tip krmiljenja: Interpolirano gibanje in pozicioniranje • Sekundarna vretena: • Velikost vpenjalne glave: 8,3 in / 210 mm • Nos vretena: A2-5 • Pogonski sistem: Direktni pogon, jermenski pogon • Največja nazivna moč: 15,0 hp / 11,2 kW • Največje število vrtljajev: 4000 o/min • Največji navor: 100 ft-lbf pri 870 o/min / 135,6 Nm pri 870 o/min • Premer preboja vretena (ne skozi): 0,81 in / 20,7 mm • C-os sekundarnega vretena: • Največja moč: 5,0 hp / 3,7 kW • Maks. število vrtljajev: 60 o/min • Natančnost pozicioniranja (±): 0,01° • Premer zavore: 8,5 in / 216 mm • Zavorni moment: 140 ft-lbf / 190 Nm • Tip krmiljenja: Interpolirano gibanje in pozicioniranje Dujdpfxszh Eh Ts Altow • Pozicioniranje sekundarne vretena (M119): • Pozicioniranje (±): 0,02° • Premer zavore: 8,5 in / 216 mm • Tip krmiljenja: samo pozicioniranje • Revolver: • Število orodij: 12 postaj • Zunanji in notranji nosilci orodij: katerakoli kombinacija (odvisno od revolverja) • Zadnji prostor za stružno palico (od zadnje strani revolverja): 4,00 in / 102,0 mm • Pogonska orodja: • Maks. število vrtljajev: 4000 o/min • Razmerje prenosa: 1:1 • Orodje: BMT65 • Splošno: • Prostornina hladilne tekočine: 55 gal / 208 l • Zahteve za zrak: • Potreben pretok zraka: 4 scfm pri 100 psi / 113 l/min pri 6,9 bara • Inline cev za zrak: 3/8 in • Spojka (stisnjen zrak): 3/8 in • Minimalen tlak: 80 psi / 5,5 bara • Električni podatki: • Vreteno: 4500 o/min • Pogonski sistem: Direktni pogon, jermenski pogon • Moč vretena: 30,0 hp / 22,4 kW • Vhodna izmenična napetost (3-fazna) – nizka: 220 VAC; Polna obremenitev: 70 A • Vhodna izmenična napetost (3-fazna) – visoka: 440 VAC; Polna obremenitev: 35 A • Dimenzije – transport: • Notranja paleta: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Izvozna paleta: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Tehnična specifikacija Protinavojno vreteno: Da Pogonska orodja: Da

Stanje: rabljeno, Leto izdelave: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total power requirement: 10 kW Machine weight approx.: 3,500 kg Space requirement approx.: m KADIA Vertical honing machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial No.: 50 / 1790 ----- Max. honing diameter: 10 – 90 mm Max. honing depth: 30 – 450 mm Max. spindle stroke: 490 mm Spindle throat depth: 400 mm Installation height under spindle nose (top): approx. 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Infinitely variable spindle speeds: 160 – 830 rpm Infinitely variable stroke speed: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW – 400 V – 50 Hz Weight approx.: 3,500 kg Total machine height approx.: 4,000/3,300 mm Accessories / Special features: • Machine equipped with a PLC control SIEMENS S 5 / Unipos 4.0 for input of all important honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With a fixed table 600 x 400 mm • Automatic shutoff after a specific, preset time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feeding head ESZ 90/1 D Duedpfx Alst Hw T Sjtjw • Separate hydraulic system, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: Good to very good – ready for demonstration Delivery: Ex stock – as seen here Payment: Strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1995, Cutting diameter: 260 mm Saw band length: 3830 x 27 x 0.9 mm Cutting range (flat): 310 x 260 mm Cutting range (square): 260 x 260 mm Cutting speed, stepless: 19-110 m/min Feed length: 750 mm Multiple feed length: 6750 mm Material support height: 700 mm Machine weight: approx. 1.4 t Dimensions: approx. 2100 x 2300 x 1720/1300 mm Incl. various saw bands Dsdewhqxmjpfx Altouw Incl. chip conveyor

Stanje: rabljeno, Leto izdelave: 2015, proizvajalec krmilnikov: Fanuc, model krmilnika: 31i-B, Description: General: Year of manufacture: 2015 Control: Fanuc i 31-B Turning diameter: 175 mm Maximum turning length: 678 mm Main spindle: Technology: motor spindle Speed: 4,500 rpm Power: 11 kW Bar capacity: 65 mm C-axis: 0.001° Clamping cylinder: hollow clamping cylinder Chuck: collet chuck Sub-spindle: Technology: motor spindle Speed: 5,000 rpm Power: 7.5 kW Bar capacity: 51 mm C-axis: 0.001° Clamping cylinder: semi-hollow clamping cylinder Chuck: collet chuck Tool turret I (X/Y/Z/B): Technology: tool turret Number of stations: 12/24 Tool mount: BMT Powered tools: 6,000 rpm X-axis: 330 mm Y-axis: 80 mm (+/- 40 mm) Z-axis: 1,040 mm B-axis: 182° (+/- 91°) Tool turret II (X/Y/Z): Technology: tool turret Number of stations: 12/24 Tool mount: BMT Powered tools: 6,000 rpm X-axis: 127 mm Y-axis: 65 mm (+/- 32.5 mm) Z-axis: 678 mm Equipment / Accessories: Chip disposal: chip conveyor Duedpfjy Hnt Esx Altsw Coolant supply: 2x high-pressure coolant pump Bar feeder: IEMCA Master 80 HF – 4 meters Finished parts removal: part gripper + conveyor belt Setup mode: electronic handwheel

Stanje: rabljeno, Leto izdelave: 1961, Premer obdelovanca - maks. 100 mm Premer obdelovanca - min. 10 mm Dolžina obdelovanca 1000 mm Skupna potrebna moč 16 kW Teža stroja cca 3 t Potrebni prostor cca 0 m Duedpfx Aowwl I Isltsw Vodila so bila obnovljena pred 10 leti.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Working Area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis travel: 350 mm Table adjustment: 8° X-axis travel: 190 mm Grinding Spindle Max. grinding wheel diameter: 500 mm Max. grinding wheel width: 80 mm Grinding wheel bore: 127 (203) mm Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Protective hood for grinding wheel: D500 x 80 mm Dujdpfx Aovz Snkjltsw Workpiece Spindle Speed: 1 – 2,000 rpm Workpiece spindle mounting: MT4 Tailstock Tailstock quill mounting: MT3 Tailstock quill stroke: 30 mm Fine adjustment range (cylinder): ± 0.04 Equipment Paper band filter system Rinsing pistol Mechanical mist extraction

Leto izdelave: 2016, stanje: skoraj kot novo (rabljeno), Offered is a vertical turning and grinding center VLC 100 GT, retrofitted in 2022. With the pick-up spindle unit, workpieces can be fed directly from the side-mounted conveyor belt into the working area. Thanks to its modular design, the VLC 100 can be configured for a wide range of applications. The images show, for example, a combination of turning tools (block tool holders) and grinding spindles for soft or hard machining (internal, external). Depending on the workpiece or machining technology, these machining modules can easily be adapted. CONTROL Siemens 840Dsl Dsdpfeh Tm Duox Altsuw TECHNICAL DATA Max. workpiece diameter: 100 mm Max. workpiece height: 150 mm X-axis travel: 605 mm Z-axis travel: 530 mm PERFORMANCE Main spindle: 18 kW Grinding spindle: 12 kW TOOL HOLDER 2x block tool holders VDI / Capto Console with grinding spindle 12 kW, 60,000 rpm Price, delivery time, and machine specifications upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 1.600 kg, skupna višina: 2.780 mm, skupna širina: 2.265 mm, skupna dolžina: 2.110 mm, poteza s peresom: 450 mm, dolžina obdelovanca (maks.): 1.220 mm, širina obdelovanca (maks.): 870 mm, višina obdelovanca (maks.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a high-performance and precise used die-sinking EDM machine, specifically developed for demanding applications in tool and mold making. Thanks to its modern control system, excellent surface quality, and high efficiency, it offers an outstanding investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large work area & high loading capacity: Travel (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positional accuracy via linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notifications ✅ Maximum productivity & flexibility: Automatic 48-position electrode changer for unattended operation Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology Dedsw Ebtvepfx Altsuw ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with minimal maintenance required Ideal for: ✔ High-precision mold and tool machining ✔ Series production with the highest quality standards ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and cost-effective EDM sinking! 📌 Our used 2015 machine is cleaned, overhauled, and thoroughly tested prior to sale to ensure top quality and reliability.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 018.0179.90.035, (Please state your offer price) Duodjyh R Uwjpfx Altjw Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 6.417 h, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, skupna masa: 4.400 kg, število osi: 4, This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features travel distances of 600 mm x 400 mm x 400 mm, with axis speeds of up to 6 m/min. The machine can process workpieces weighing up to 1000 kg and measuring up to 1000 x 700 x 400 mm. It comes equipped with a dielectric unit with a capacity of 750 liters and has a total machine weight of 4400 kg. Take the opportunity to purchase this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for further information about this machine. • Axis speeds (X/Y/Z): 4 / 4 / 6 m/min • Positional reading accuracy (X/Y/Z): 0.1 µm • C-axis rotation speed (standard): 0–100 rpm • Work tank dimensions: 1200 x 800 x 500 mm • Worktable size: 800 x 600 mm • Max. electrode weight: 100 kg • Max. workpiece weight: 1000 kg • Admissible workpiece dimensions: 1000 x 700 x 400 mm Dedpfex Nr N Nsx Altjuw • Dielectric unit capacity: 750 l • Generator type: ISPG • User interface: AC FORM HMI • Power supply: 3 x 380 V, 3-phase, 50 Hz