Polica delavnice

Höhe 2550 mm Breite 2740 mm

Stanje: novo, Bandsaw Machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Article No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment: Kledpscuntzofx Af Nel - Horizontal vice - Length stop (600 mm) - Saw blade tension monitoring, electromechanical - Chip removal brush - Coolant device - Operating manual

Stanje: novo, Leto izdelave: 2025, 150 ltr. insulated tank with 13.5 kW / 400 V heater featuring automatic temperature cut-off, frame, and bag-in-box filling unit with bag holder * Simple, safe, excellent value for money * No temperature fluctuations * Exceptionally gentle heating thanks to large heating surface (0.4 m²) * With thermostat: switches off at set temperature * Height-adjustable stainless steel frame – tank drains completely "Leisure time" during heat-up: approx. 40 min for 150 ltr. Hourly output approx. 150 ltr. Also available with 18 kW / 400 V heater – hourly output 180 ltr. Two-station bottle filling available No 400V connection available? Kjdet U H Nrepfx Af Nell Tank pasteurizer is also available with gas-fired condensing boiler. ##### RINK – pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Kjdjkvnumopfx Af Noll Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Saw blade diameter 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160x90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80x100 mm Total power requirement 1.8/2.5 kW Machine weight approx. 0.2 t Space requirement approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts left and right up to 45°, end stop at 90° and at 45° left • For cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vise with quick-clamping lever, longitudinally adjustable jaw, adjustable guide, and double clamping arm for burr-free cuts • Cone safety clutch made of hardened steel to protect the saw blades • Large base plate made of solid cast iron for maximum stability and vibration-free sawing • 2 speeds: 30 + 60 rpm • High-performance special gearbox with elastic coupling for heavy-duty applications • Automatic cooling directly on the saw blade Klsdpfsd Iin Tox Af Nsl • Saw head with double bearings • 24 V safety switch in handle with restart interlock • Length stop, assembly tools ATTENTION: Price does not include saw blade!!!

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Technical specifications = see data sheet PDF. Kedpoup Dz Ijfx Af Noll

Stanje: dober (rabljeno), Cutting line A.Saint 1500 x 2 mm, I have more photos available on my website. Klsdpfx Aeiihp Sjf Nsl

Stanje: novo, Special promotion price for stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt Grinder: Bernardo Type/Model: MS 75 x 2000 S Condition: New Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact wheel Ø x width: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port: 100 mm Motor output (S1 100%): 3.0 kW Motor input power (S6 40%): 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: - High grinding performance thanks to high belt speed Ksdpofnr Aijfx Af Nell - Quick adjustment for horizontal and inclined positions - Continuous flat grinding surface for optimal processing of long workpieces - Constant belt tension via spring-loaded tensioning device - Versatile use for grinding edges, surfaces, and for cylindrical grinding - Quick-release system included for fast belt changes - Easy adjustment of parallel belt tracking via adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the sanding belt Scope of delivery: - Abrasive belt K 80 - Flip-up protective shield - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate emergency stop button - Base frame

Stanje: novo, Leto izdelave: 2025, Nova stroj za profiliranje pločevinastih streh s snap lock spojem SL-1 Kljdpfx Afoiuz T Ie Nol Stroj za profiliranje strešnih panelov s snap lock spojem SL-1 je zasnovan in izdelan v našem podjetju ter predstavlja eno od paradnih naprav za proizvodnjo kovinskih strešnih panelov. Ta naprava izdeluje profile za samozapiralne stoječe strešne panele s stranskim klik zapiralom (snap lock). Glavna prednost takšnega sistema zapiranja je enostavna montaža: za povezavo dveh panelov preprosto položite zgornji del na spodnjega in pritisnete s silo, ob čemer zaslišite značilen klik. Prav zato sistem imenujemo samozapiralni spoj. V primerjavi s standardnimi paneli stoječega roba z mehanskim zapiralom, ki jih je potrebno zapirati s posebnim orodjem ali napravo, so snap lock paneli bistveno lažji za montažo in ne zahtevajo dodatnih dragih naprav. Za pritrditev panelov na strešno konstrukcijo lahko uporabite standardne samorezne vijake, saj stroj med profiliranjem na eni strani panela izdela posebne pritrditvene luknje. Takšna zasnova dodatno zmanjša stroške in bistveno poenostavi montažni proces, saj ne potrebujete sponk kot pri klasični montaži stoječega roba z mehanskim zapiranjem. Kritina s snap lock sistemom je zato enostavnejša za vgradnjo, ne zahteva visoko usposobljenega kadra ter zmanjšuje stroške za dodatne naprave. Skupna višina panela: 31 mm Po naročilu lahko izdelamo stroj za višino panelov 26 mm. Stroj ima 10 parov profilirnih valjev. Eden izmed valjev vsebuje posebne prebijalne elemente za izdelavo montažnih lukenj v panele. Rezalna orodja so iz orodnega jekla, termično obdelana in polirana za dolgo življenjsko dobo. Maksimalna širina pločevine: 700 mm, minimalna: 250 mm. Stroj SL-1 je enostavno nastavljiv po širini – prehod na drugo širino trakov izvedete z obračanjem posebnega ročaja. Dolžina profiliranja: neomejena Hitrost profiliranja (m/min): cca 7 Dodatne možnosti: - prečna rezalna nož; - merilna naprava za dolžino; - valji za izdelavo panelov z ojačitvenimi rebri; Po želji kupca je lahko stroj opremljen z avtomatizacijo in električnimi škarjami za rezanje panelov. Standardna dobava samozapiralnega profilirnega stroja SL-1 vključuje varnostne zaščite delovnih delov pred tujki. Stroj je primeren za profiliranje pločevine različnih vrst: pocinkano jeklo, baker, aluminij, barvna pločevina ipd.

Stanje: novo, Leto izdelave: 2024, Manual band saw machine for cuts from 0° to 60° to the right. Hydraulic blade tensioning, bow handle with control button. Combination blade guide with side bearings. Carbide cutting inserts and an upper bearing. Manual cutting or also possibility of unattended cutting, using the saw bow’s own weight, regulated by hydraulic brakes; afterwards, the bow is manually raised back to the desired position. Manual vise for quick and precise clamping of the workpiece. Swiveling of the saw bow from 0° to 60° to the right with locking positions, precise angle measurement, manual quick-action vice with quick clamping lever. Millimeter-graded scale rod. Coolant tank integrated on the upper side of the base frame with discharge nozzle and electric coolant pump for cooling both sides of the saw blade guides. Kodpfxjgculve Af Noll Control voltage 24 VAC, main switch and control system. Maximum circuit and short-circuit protection. Connection voltage: 400V/50Hz/3Ph standard. Machine color: yellow RAL 1018 and grey RAL 7036. You are always welcome to inspect the desired machine in our manufacturing/showroom facility. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 68131, Cut-off saw diameter max.: 300 mm Cutting range round: 100 mm Saw head swivel angle up to: 45° Vice clamping range up to: 160 mm Kodpfx Afsfug Exj Noll Cut-off saw speed: 2,500 rpm Drive motor: 230 V, 1.1 kW Space requirement: 850 x 750 x 1,500 mm Weight: 126 kg