Enota za nadzor temperature

gwk teco wd 100.09.15

Stanje: kot nova (razstavni stroj), Generator set in insulated container The unit is in absolutely brand-new condition (104 operating hours). A Krampitz tank is installed inside the container and is filled with 500 liters of diesel fuel. Engine: IVECO Generator: STAMFORD Continuous power output: 20 kVA / 16 kW Frequency: 50 Hz Rated current: 28 A Voltage: 400V / 231V Speed: 1500 rpm Weight: approx. 4000 kg SÄBU container / Dimensions: 4.00 m long, 2.60 m wide, 3.05 m high - Control panel - Ventilation system for fresh air and exhaust - 700 liter tank - Sound- and heat-insulated container Csdsiw Ed Hjpfx Afqohf Loading and transport can be offered as an option. Only serious and legitimate inquiries will be answered. Please include your name, email address, and telephone number.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 32.827 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 230239, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2 letvica, injekcijska masa: 184 g, skupna masa: 11.200 kg, Here we, as a trading company specializing in injection molding machines, offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines from model year 2010 onwards. We have been wholesalers of used injection molding machines for over 25 years. Important information – Tax advice and benefits for used machinery: From 01.07.2025, used machines are also eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to new machines, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Arburg 1500T 2000-400 rotary table vertical machine Machine serial no.: 230239 A full list of equipment can be found in the downloadable documents - machine card Controller: Selogica Year of manufacture: 2014 * Total machine cycles: only 1,469,728 * Automatic operating hours: 32,827 h Clamping Unit Distance between platens: 700 mm Clamping force: 200 t/2000 kN Mould installation height: 400 mm Table diameter: 1500 mm Rotating axis: 180° Rotational speed: min. 2.4 s Weight on rotary table: 1,050 kg Ejector force: 45 kN/175 mm ejector stroke Injection Unit Screw diameter: 40 mm Injection volume: 201 ccm Shot weight: 184 g Injection pressure: 2,000 bar Extras - 2-station 180° rotary table, alternating forward/backward, with servo-electric drive and hydraulic locking pin for precise centering at end position; safety separation between clamping and loading areas, height-adjustable on the turntable to match lower mould halves, with provision for media lines and connections for lower mould halves - Rotary table diameter: 1500 mm - Max. clamping force: 2,000 kN - Injection unit according to EUROMAP 400 - Screw diameter: 40 mm - Special ergonomic rotary table model with following features: - Corrosion protection treatment for rotary table (VE 574/90) - 2-circuit water connections - 3 hydraulic connections for needle shut-off system - 3 x core pulls - Per station: 1 core pull and 2 temperature control circuits - 6 x mould temperature control - 12 zones for mould heating circuits Chsdpfjuuf Iasx Afqef - Kistler cavity pressure sensors (2x) - Temperature monitoring for start-up parts Weight: 11,200 kg Power: 22 kW motor – heating power: 9.4 kW, 5 zones – connected load: 100 A The machine is offered after functional testing, fully operational, with commissioning warranty – tested before dismantling. Information about our offered machines and our company: - We only sell machines purchased from active production, stored at our Hanover warehouse - All machines are checked and tested before dismantling - We do NOT sell insolvency lots – we are NOT an intermediary dealing in third-party property - All machines offered come from successful companies where maintenance and care are a given - All machines offered can be inspected at our warehouse

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Arburg 1200 T 2000-800 Clamping force: 200 tons Maximum opening force kN/mm: 115/500 Screw diameter: 45 mm Shot volume: 318 cm³ Shot weight: 291 g Chjdpswugczefx Afqof Injection pressure: 2470 bar 1. Model: T-model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastic cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for wedge-type coupling geometry 5. Control system: SELOGICA 'direct' control 6. Technology level: Level 2 servo-driven with 2 regulated pumps 7. Rotary table: Advanced ergonomic special version, 2-stage 180° forward/reverse alternating 8. Nozzles: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric &

Stanje: rabljeno, Servomotor, electric motor, DC motor, DC generator, electric motor with DC generator -Spare part: from a Scharmann boring mill -Manufacturer: Kessler, electric motor with DC generators : DM21-16 32 kW 2880 rpm from Generator Type: G 50/42/1 6/18 kW Chedpfxjgiy T Ej Afqof from Generator Type: G 44/14/2 8.2 kW -Technical data: see type plate photos -Dimensions: 1750/580/H540 mm -Weight: 886 kg

Stanje: rabljeno, Leto izdelave: 1980, Pressing force 25 t Stroke rate 1,500 spm Total power requirement 20 kW O F F E R We are pleased to offer you, subject to prior sale and error, the following from stock: BRUDERER High-Speed Automatic Punching Press with Mass Counterbalance Model: BSTA 25 Year: 1980 _____ Nominal press force: 25 t Stroke rate min. – max.: 100 – 800 / 950 / 1075 / 1240 / 1350 / 1500 spm Adjustable stroke lengths: 13 / 16 / 19 / 25 / 32 / 38 mm Ram adjustment: 51 mm Table size: 530 x 530 mm Ram face (upper): approx. 360 x 430 mm Die height: 230 - 281 mm Front opening for tool change: approx. 540 mm Adjustable strip entry height: 80 – 150 mm Max. strip width / left side opening: 202 / 203 mm Main drive approx.: 18 kW Total connected load approx.: 20 kW - 380 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • BRUDERER system for complete mass counterbalancing by means of a transverse eccentric shaft and adjustable lever system • BRUDERER strip feed unit, left-side mounted, type BBV 202/120, adjustable stroke, height-adjustable • Horizontal decoiler, tension-controlled • Continuous stroke and single stroke selectable, inching operation, parts counter, air blow-off device • Separate floor-standing control cabinet and electrical cabinet, vibration dampers • Large, sophisticated sound enclosure (disassembled) Condition: Very good! Previously used for precision electronics connectors, regularly serviced by BRUDERER! A video of the machine will be available shortly—please click here soon: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice Csdpfx Ajvu E Iqjfqohf We look forward to your order. Further mechanical and hydraulic presses and other machine tools in stock – please check our current inventory on our website: geiger-

Stanje: rabljeno, Permanent magnet motor, permanent magnet motor, electric motor, n-motor, permanent magnet motors, servomotor, spindle motor, permanent magnet three-phase servo motor, permanent magnet DC servo motor, DC spindle motor Chedpfxegz Tiwo Afqjf -Manufacturer: Fanuc, DC spindle motor -Type: 3-S TG 6 -Shaft: Ø 42 x 110 mm -Dimensions: 830/220/H288 mm -Weight: 70 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 7 h, številka stroja/vozila: MA0036_S0053901, Screw Compressor ALMIG BELT XP 8 - 10 bar (air-cooled) Year: 2024 / IMMEDIATELY AVAILABLE! Operating Hours: 7 h Technical Data Model: BELT XP 8 Operating Overpressure: 10 bar (g) Free Air Delivery, per ISO 1217 Annex C: 0.99 m³/min Degree of Protection / Insulation Class Drive Motor: IP 55 / ISO F Rated Power Drive Motor: 7.5 kW Operating Voltage / Frequency: 400/50 V/Hz Cjdsd S Dq Eepfx Afqjhf Sound Pressure Level (DIN 45635 Part 13): 63 dB(A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 274.5 kg Compressed Air Connection: G 3/4" Visit our showroom in Erlangen. We always have a wide range of new and used compressors in stock. For new equipment, we offer in-house bank leasing with a truly simple process.