Nizki nakladalnik

GVN Trailer 3 Axle Tramex Platform Lowbed

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 201 kW (273,28 KM), vrsta goriva: dizel, barva: rumena, skupna masa: 26.300 kg, številka stroja/vozila: 63X1784, Oprema: hidravlika, kabina, Opis izdelka Rabljeni nakladalnik na kolesih Proizvajalec: Caterpillar Model: CAT 980C Pogon: dizelski motor Ksdpjum Ebqjfx Af Nsll Stroj se prodaja v stanju, v kakršnem je VIJAY JPN Industrial Trading Pte Ltd 13A Pandan Crescent, Singapur 128478

Stanje: kot nova (razstavni stroj), Centrifugal pump Alfa-Laval Material: Stainless steel Medium: Fruit concentrate/fruit juice Flow rate: 20,000 l/h Delivery head: approx. 25 m Power: approx. 3 kW Speed: approx. 2,900 rpm Kljdpfx Ashryyhsf Nol Inlet/Outlet: DN50 1 stainless steel tank, vertical, cylindrical, closed 1 stainless steel base frame for pump and tank

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: rumena, Leto izdelave: 1997, obratovalne ure: 7.028 h, Produktbeschreibung Gebrauchter Komatsu Radlader Hergestellt von KOMATSU Modell WA150-3 Ksdpfxeumq Hxj Af Nell Betriebsstunden: 7.003 Std. Angetrieben von Diesel-Motor Maschine wird im derzeitigen Zustand verkauft Bitte kontaktieren Sie: VIJAY JPN Industrial Trading Pte Ltd 13A Pandan Crescent, Singapur 128478

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2025, GVN prikolica s 3 osovine, ekskluzivni niskopodni model Klsdpfxeqxbcne Af Nsl Za više informacija kontaktirajte nas.

Stanje: pripravljen za uporabo (rabljen), Tehnične lastnosti Moč in motorji Napetost: 400 V Priklop: trifazni Moč: 4,4 kW Skupne dimenzije Kljdpfx Afjucir Re Nsl Dolžina: 6620 mm Širina: 3035 mm Višina: 1741 mm Teža: 1200 kg

Stanje: novo, številka stroja/vozila: 1, lastna masa: 11.000 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2020, Oprema: ABS, New Ceylan low-loader trailer, ready for registration. 3 axles, with first axle liftable and third axle steering. Equipped with EBS, full-width double hydraulic ramps, widening devices, winch preparation, loading deck height 87 cm, loading area length 9.95 m, total length 13.65 m. RUD lashing points. Immediate delivery subject to prior sale. Warranty included. Dealer: INTERDRIVE SRL - PARMA. Kjdpfxsh S Aw Re Af Nell

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Kodoxraimjpfx Af Noll Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit

Stanje: rabljeno, številka stroja/vozila: SKBE48S338KE1xxxx, Leto izdelave: 2010, Za več informacij se obrnite na ATS Norway. Prosimo, navedite referenčno številko pri povpraševanju: 18968 Specifikacije: - Model 2010 - 3 osi - Pnevmatske gume (glejte slike) - Hidravlični pogonski most - Širina: 255 cm - Pripravljen za dostavo Opis: Vse deluje, kot je navedel prejšnji lastnik. Kedpfx Afevgz Auo Noll Pripravljen za dostavo Tuf: Da EU odobren do: 20.10.2026 Lastna teža: 9460 Skupna teža: 48000 Nosilnost: 38540 Širina: 255 Dolžina: 1340 Model: Prikolica za stroje z hidravlično dvižno rampo

Stanje: novo, lastna masa: 11.000 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, Leto izdelave: 2025, Oprema: ABS, GVN prikolica 4-osovinski standardni niskopodni model. Kljdpfx Afsqxbapj Nel Za više informacija molimo kontaktirajte nas.

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. Kledjwzmcbjpfx Af Nol COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.