Pritrdilna kota

Guss 1155/200/H160 mm

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Kedpfjd Nt Rqox Af Noll - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): Kedpfjgwbbqox Af Nell No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: novo, Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump displacement: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Kodpfx Aoi Hplkof Nsll Machine height: 1100 mm Weight: 850 kg

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), used T-slot angle plate Technical data: Dimensions Height: 1120 mm Width: 320 mm Slot width: 20 mm Kljdpfx Ajgwxmxof Nol with - 7 horizontal T-slots used, in good condition

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space Kodpfohvi E Ijx Af Noll EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)

Stanje: novo, Typ 400C Abrichthobel: Tischmaße: 400 x 1800 mm Messerdurchmesser: 70 mm Drehzahl Messerwelle: 5700 U/min 3 Messer: 400 x 20 x 3 mm Max. Tischverstellung: 4 mm Dickenhobel: Tischmaße: 400 x 760 mm Max. Spanabnahme: 4 mm Vorschubgeschwindigkeit: 7 m/min Drehzahl Messerwelle: 5700 U/min Max. Arbeitshöhe: 220 mm Min. Arbeitshöhe: 4 mm Langlochbohreinrichtung: Tischmaße: 250 x 500 mm Längshub: 205 mm Quershub: 95 mm Spannzange (SX): 16 mm Drehzahl Bohrspindel: 5700 U/min Motorleistung: 3 kW Zubehör: Service-Schlüssel, Schutzvorrichtungen an der Langlochspindel, Abrichtanschlag. Kedpfx Afed Nl Sfe Njll Gewicht: 390 kg

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Kljdji Hn Sropfx Af Njl Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max, option): mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and noise protection cabin Cam spacing (mm): 500 EDGING PROCESSING (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Rough-milling unit (2 x approx. 5.8 kW) Universal profiling spindle, 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Klodpfx Ask Nk R Dsf Nsl Gluing unit (hot melt + pre-melter) Edge magazine for rolls (2-fold) + edge pressure zone End trimming unit (2 x approx. 0.35 kW) Pre-milling unit (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW) 0°-30° Multi-function unit (radius/contour milling unit) with 2 revolvers (8+8 positions) – max. 27 m/min Universal grooving/rebating and profiling spindle 1 x approx. 4 kW (0° - 90°) Profile scraping unit + flat scraping unit + buffing unit

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a production line Edge Material (roll) Thickness (min/max) mm: 0.3 / 3 Panel Thickness (min/max) mm: 10 / 60 Working Width (min/max) mm: 230 / 1600 (approx.) Control / Software: WinEdge Feed Speed (adjustable) m/min: 10 - 30 (approx.) Protective and soundproof enclosures SIZING UNIT (per side): No. 2 Hogging units (2 x 5.8 kW approx.) No. 2 Jointing units aft (2 x 4 kW approx.) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) Pressing zone (CNC-controlled) Edge magazine for rolls (slot number): 6 Pre-milling unit 08.055 (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx., 0°-30°) No. 5 Universal milling units for grooving/rabbeting and profiling (5 x 4 kW approx.) Profile scraping unit Flat scraping unit Kjdpfol Hydmex Af Noll Spraying unit (for polishing liquid) Buffing unit + hot air blower – edge finisher

Stanje: rabljeno, Leto izdelave: 2013, Numerical control PC office with Widge Plus software Machine suitable for 1st and 2nd panel pass Motorized mobile shoulder opening via NC, 3200 mm Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in coil, min - max (PVC-ABS): 0.3 - 3 mm Infinitely variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Support track with retractable pins Pin height: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Squaring section consists for each side of: Kodpfxsk Egvde Af Njll Non-stick group Timed splinter guard automation Double milling unit Edging section consists for each side of: Gluing unit with pre-melter for PUR adhesive and pre-melter for EVA adhesive Edge pressure rollers, electronically controlled by NC Edge holder magazine with 6 positions Cutting unit with two motors Overlapping cutting unit Staggered trimming unit with two electronically NC-controlled motors Corner rounding unit with 4 motors 0-90° swiveling planer group, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + dual stacked milling spindle (fixed shoulder) Anti-adhesive groups Edge scraper unit Glue scraper group Brushing unit Phon (sound insulation) group