Rezkalni stroj

Grupp UF2

Stanje: dober (rabljeno), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full identification including a correct telephone number and email address when submitting an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Hnjdpfx Asxyc Tksdkoi Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed, X/Z-axis: 5 – 500 mm/min Feed rate adjustment: stepless Rapid traverse X/Z-axis: 1,200 mm/min Feed, Y-axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change without notice! Features: - For horizontal machining, the milling head is swivelled 90 degrees and pushed back. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z-axis - The machine was partially overhauled by a specialist company several years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-cooling/lubrication system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training facility Available from March 2026

Leto izdelave: 1967, stanje: dober (rabljeno), številka stroja/vozila: 7011/C, Table clamping surface: 310 x 1400 mm Table travel (X-axis): approx. 950 mm Table travel (Y-axis): 325/345 mm Table travel (Z-axis): approx. 500 mm Spindle speeds: 20 - 1500 rpm Hnjdpsd Rxw Hjfx Adkji Feeds, longitudinal and cross: 18 - 620 mm/min Feeds, vertical: 18 - 620 mm/min Electrical connection: 380 V, kW Required space: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Stanje: rabljeno, Leto izdelave: 2005, Technical Data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Hedpfx Aox Irx Iodksni Shortest remaining workpiece length: 35 mm Total connected load: 2.0 kW Saw motor, frequency-controlled: 1.5 kW Cutting speed, infinitely variable with frequency control: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, upper part raised: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Infinitely variable cutting speed - Replaceable carbide saw blade guides - Hydraulic cutting feed - Mechanical saw blade tension - Machine lamp - Saw blade cleaning by revolving, easily replaceable wire brush - Coolant supply: 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump capacity 16 l/min - Minimum quantity lubrication system - Infeed roller conveyor (1000 mm) and outfeed roller conveyor (2000 mm) with scale and length stop

Stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 300 mm Hsdpfxol Ra Uie Adkjni Cutting range at 90° round: 100 mm Cutting range at 90° rectangular: 90 x 90 mm Mitre cutting range at 45° rectangular: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirement: 850 x 600 x 1600 mm

Stanje: rabljeno, Column Drilling Machine Make: IBARMIA Model: A-35 Year of Manufacture: 1980 – workshop tested Machine No.: 1294-C Spindle speed: see technical data Accessories: - Automatic feed - Machine lamp Hnjdpfxsw Hxbmj Adkei - Machined coolant base plate - Coolant system - Operating manual Technical Data: 9 spindle speeds via gearbox steps 73/103/149/232/325/472/695/976 and 1415 rpm Right/left rotation 4 automatic feeds: 0.1/0.2/0.4 and 0.4 mm Drilling capacity in steel (ST 60): 35 mm Drilling capacity in cast iron (GG 20): 45 mm Tapping capacity in steel (ST 60): M 27 Tapping capacity in cast iron (GG 20): M 33 Spindle taper: MK 4 Spindle travel: 200 mm Table dimensions: 510 x 510 mm (T-slot: 16 mm) Table can be rotated Weight approx. 490 kg Used, sold as seen, without guarantee

Stanje: dober (rabljeno), Stroj je v dobrem delovnem stanju. Hjdpfx Adeqzypmjkoni

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (flat): 150 x 110 mm Cutting capacity at 45° (round): Ø 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 & 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment/features: - Semi-automatic vertical cold circular saw Hnedpfx Adet A Ar Ssksi - Pneumatic quick-acting material clamping device - Infinitely variable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a highly stable rectangular guide - User-friendly and stepless lifting adjustment of the sawing unit via clamping lever - Generously dimensioned gearbox - Equipped with Eisele rotation compensation for extended saw blade lifetime - Easy saw blade changeover - High productivity while requiring minimal floor space (less than 1 m²) - Coolant system integrated in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be tested/inspected under power on site by arrangement. All specifications are subject to change. Prior sale reserved. The item is sold under exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, body, or health.

Stanje: rabljeno, Leto izdelave: 1984, Technical Details: X-travel: 950 mm Y-travel: 255 mm Z-travel: 250 mm Spindle taper ISO: 40 / MK 4 Speed range: 45 - 2,000 rpm / 12 steps Swiveling spindle head +/-: 90° vertical = 90° right/left Swiveling spindle head +/-: 45° vertical = 90° right/left Feed (table): Table feed X/Y: 16 - 132 mm/min Feed (table): Table feed Z: 8 - 66 mm/min Clamping table: 1,200 x 300 mm Total power requirement: 5.4 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 1.6 x 2.0 x 2.0 m Hnjdpju Ndcysfx Adkoi The spindle head is swivelable. Equipment: - Equipped with coolant system - Equipped with coolant collection tray Accessories: various milling cutters and arbors (see comparable items in photo)

Stanje: rabljeno, Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0278, Mitre Cold Circular Saw EISELE Type VMS-III-S-HYD Type No.: 430 Machine No.: 0278 Year of manufacture: 1984 Cutting range at 90° (Round): Ø 120 mm Cutting range at 90° (Flat): 150 x 110 mm Cutting range at 45° (Round): Ø 100 mm Cutting range at 45° (Flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm (2 gearbox stages + 2 motor speeds) Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Electrical connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic quick-clamping device for material - Infinitely adjustable hydraulic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage guided on very robust rectangular guideways - Comfortable and stepless height adjustment of the saw unit via clamping lever Hjdpfx Adot A Arljksni - Generously dimensioned gearbox - With Eisele rotation compensation for long blade life - Easy blade change - High productivity with minimal footprint (less than 1 m²) - Coolant system integrated in machine base - Centralized lubrication (manual) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 490 kg The machine can be tested or demonstrated under power at our premises. All information without guarantee. Subject to prior sale. The item is sold without any warranty. The exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller or for injury to life, body, or health.

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 320 mm Cutting diameter: 140 mm Total power requirement: 3 kW Machine weight: approx. 0.5 t O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: EISELE Circular Saw for Straight and Mitre Cuts Type: VMS III-S-PV Year of manufacture: 1989 _____ Max. saw blade Ø: 320 mm Cutting range: tubes approx. 130 mm tube material approx. 130 mm flat material 200 x 100 / 140 x 100 mm solid material (square) 120 mm Mitre cuts may result in slightly reduced cutting sizes. Up to max. 140 mm Saw carriage stroke, manual vertical: approx. 200 mm Hnedpfx Adow Dvivekoi Saw blade speed: 17–34 rpm Saw blade drive: approx. 2/2.6 kW Total drive: approx. 3 kW – 380 V – 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head can be angled for mitre cuts at 30 / 45 / 90°, adjustable via scale • 2-speed pole-changing three-phase motor, max. 2.6 kW drive • Saw carriage feed is manual, with a long and adjustable lever • Manual workpiece vice, jaw width: approx. 120 mm • Integrated coolant system with chip tray • Roller conveyor material feed, approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We also have larger EISELE cold circular saws and other (band, bow, cold circular) saws in stock. Further sawing machines always available – please inquire with us.