5-osni univerzalni obdelovalni center
GROB-WERKE G550

Name: GROB-WERKE G550
Brand: GROB-WERKE
Availability: InStock

Leto izdelave

2024

Stanje

razstavni stroj

Lokacija

Mindelheim Nemčija

5-osni univerzalni obdelovalni center GROB-WERKE G550

Prikaži karto

Podatki o stroju

Opis stroja:: 5-osni univerzalni obdelovalni center

Proizvajalec:: GROB-WERKE

Model:: G550

Serijska številka:: S2910555210188

Leto izdelave:: 2024

Stanje:: kot nova (razstavni stroj)

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Industriestraße 4, 87719 Mindelheim, Deutschland

Klic

Tehnične podrobnosti

Potovalna razdalja osi X:: 800 mm

Pomik osi Y:: 1.020 mm

Pomik po osi Z:: 970 mm

Proizvajalec krmilnikov:: HEIDENHAIN

Model krmilnika:: TNC 640

Največja hitrost vretena:: 30.000 obr/min

Dovod hladilne tekočine:: 80 letvica

Število mest v zalogovniku orodij:: 326

Vhodna napetost:: 400 V

Oprema:: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva

Podrobnosti ponudbe

ID ponudbe:: A20727432

Št. reference:: S2910555210188

Nazadnje posodobljeno:: dne 14.12.2025

Opis

Highlights:

- High-performance motor spindle 30,000 rpm | HSK-63
- TM200 with 200 tool stations
- ICS 80 bar

Base machine G550 AB Generation 2

X-axis travel: 800 mm
Y'-axis travel: 1,020 mm
Z-axis travel: 970 mm
Power supply: 400 V, 50 Hz, TN-S
Automatic work area door for manual and automatic loading/unloading
Decentralized work area extraction system
Machine control: HEIDENHAIN TNC 640 with GROB⁴Pilot
Swivel axis calibration GSC Classic
Interface (software and hardware) for connecting an automation system, version 1.7
Programmed, time-controlled warm-up cycle start via HMI
Collision monitoring DCM Collision, version 1 (HEIDENHAIN)
Swivel table (A'-axis)
Rotary table with GROB pallet clamping system (B'-axis)
Pallet locator on rotary table
Motor spindle HSK-A 63 30,000 rpm, 48/63 Nm, 40/53 kW, oil/air lubrication
GROB Spindle Diagnostics (GSD)
Double-disc magazine HSK-A 63 with a total of 126 tool stations
Auxiliary tool magazine TM200 HSK-A 63 with 200 tool stations
Tool cleaning device
Tool identification system BIS-M (BALLUFF)
Laser measuring system LaserControl LC50-DIGILOG for milling tools
Scraper-belt chip conveyor for aluminum chips, discharge height 1,600 mm
High-pressure coolant system (10–80 bar, ICS)
Through-flow cooler for coolant with air-cooled chiller (13 kW)
Godpfx Aox Evykjb Teuk
Compressed air supply through spindle center
Switchable coolant pressure boost for the nozzles in the motor spindle
Coolant recirculation on weekends
Oil skimmer for coolant maintenance
Blow-out pistol in the work area
Rinsing pistol in the work area
Volume cutting package with detection unit and rinsing functions
Rinsing device (Z-axis)
Machine accuracy package 1
Wireless touch probe RMP600 (RENISHAW)
Remote machine diagnostics with access control switch
12-month warranty

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2019

17 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 8261 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Univerzalni obdelovalni center GROB-WERKE G 550

Kirchheim bei München

332 km

Univerzalni obdelovalni center
GROB-WERKEG 550

Klic

Stanje: dober (rabljeno), Leto izdelave: 2012, Heidenhain iTNC 530 control system Working area: 800 mm x 1020 mm x 970 mm (X/Y/Z) Table size: 630 x 630 mm Table load capacity: 700 kg Maximum workpiece diameter: 900 mm Rotary table (A-/B-axis) A-axis: -185 / +45 ° B-axis: 360 ° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Gjdpjrx N Tzofx Ab Tsuk Belt filter system Motor spindle: 16,000 rpm Drive power: 25/35 kW Max. torque: 160/223 Nm Spindle taper: HSK-A63 Tool magazine: 120 positions - Probe - Kinematics package - Tool length measuring device - BLUM laser measurement system for tool monitoring - Electronic handwheel - Extraction unit - 80 bar internal coolant supply system

Poglej podrobnosti

Mali oglas

Obdelovalni center - univerzalni GROB-WERKE G 550 6-axis 252

Nemčija

5.343 km

Obdelovalni center - univerzalni
GROB-WERKEG 550 6-axis 252

Klic

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: X-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 positions (2x60) 2x pallet changers: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Required space approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with programmable rotary-tilting table (A/B-axis) The B-axis provides a swivel range of 180°, allowing the part to be machined overhead and chips to fall freely downwards. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with a single tool in one operation. Dual pallet changer, pallets 630 x 630 mm 6-way hydraulic supply to pallets with coupling mechanisms, rotary union in A- and B-axis Special hydraulic pump system Gjdewr Drnopfx Ab Tsuk ICS (internal cooling, 10–80 bar), 1 clamping channel in the working area with proportional valve 10–200 bar Electromechanical tool length measuring device GROB BLUM laser for tool monitoring Tool coding Chip conveyor 3D touch probe M&H Oil mist extraction Siemens HT8 electronic handwheel Rinse gun Coolant rinsing in the work area Air gun Oil skimmer Automatic door Remote diagnostics Price includes a 6th axis MAPAL Tooltronic with 2 U-axis heads: 1. LAT125-HSK100 2. LAT160-HSK100

Poglej podrobnosti

Mali oglas

5-osni univerzalni obdelovalni center GROB-WERKE G550T

Mindelheim

400 km

5-osni univerzalni obdelovalni center
GROB-WERKEG550T

Klic

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N2832055210401, potovalna razdalja osi X: 800 mm, pomik osi Y: 1.020 mm, pomik po osi Z: 970 mm, proizvajalec krmilnikov: Siemens, model krmilnika: SINUMERIK ONE, največja hitrost vrtenja: 14.500 obr/min, dovod hladilne tekočine: 80 letvica, število mest v zalogovniku orodij: 80, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Highlights: - Powerful motor spindle HSK-A 100, 14,500 rpm, 225/261 Nm, 50/58 kW - 80 tools in the system Gujdpfoxupggex Ab Tek - Latest machine generation _____ Base Machine G550 AB Generation 2 X-axis travel: 800 mm Y'-axis travel: 1020 mm Z-axis travel: 970 mm Power supply: 400 V, 50 Hz, TN-S Automatic work area door for manual and automated loading/unloading Decentralized work area extraction system, 800 m³, filter class ISO ePM1 80% Machine control: SIEMENS SINUMERIK ONE with GROB4Pilot Swivel rotary table (A'-axis) Rotary table with GROB pallet clamping system (B'-axis) Motor spindle HSK-A 100, 14,500 rpm, 225/261 Nm, 50/58 kW, oil/air lubrication Double disc magazine HSK-A 100 with a total of 80 tool pockets Tool cleaning unit Electromechanical tool length measuring device Laser measuring system LaserControl for milling and turning tools Tool lift Pallet 630 x 630 mm, star-pattern T-slots, without drive dogs Hinged belt chip conveyor, discharge height 1,100 mm High-pressure coolant system (10–80 bar, ICS) Coolant recirculation chiller with air-cooled unit (13 kW) Compressed air supply through spindle center Work area floor flushing system Blow-off gun at work area Rinsing gun at work area Flushing system (Z-axis) Machine accuracy package 1 Prepared for use of a radio signal receiver Remote machine diagnostics with access control switch 12-month warranty

Poglej podrobnosti

Mali oglas

Asenovgrad

914 km

Univerzalni obdelovalni center
GROB-WERKEG550

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, potovalna razdalja osi X: 800 mm, pomik osi Y: 950 mm, pomik po osi Z: 1.020 mm, model krmilnika: Siemens 840D sl, največja hitrost vretena: 9.000 obr/min, delovne ure vretena: 10.590 h, moč vretenovega motorja: 65.000 W, POMIKI Delovni pomiki v osi X- / Y'- / Z- [mm]: 800 / 950 / 1020 Gedexrcuropfx Ab Touk Os B: 360° Os A: -185°/+45° Maks. hitrosti v osi X- / Y'- / Z- [m/min]: 90 / 50 / 90 Maks. pospešek v osi X- / Y'- / Z- [m/s2]: 8,5 / 4,5 / 14 Maks. podajalna sila v osi X- / Y'- / Z- [kN]: 8 / 8 / 12 GLAVNO VRETENO Orodno vpenjalno mesto za kratke votle stožce po ISO 12164-1 HSKA100 Premer prednjega ležaja vretena [mm]: 110 Maks. število obratov [vrt/min]: 9000 Maksimalna pogonska moč pri 100% / 40% delovnem ciklu [kW]: 54 / 65 Maks. vretenin navor pri 100% / 40% delovnem ciklu [Nm]: 470 / 575 MIZA Premer mize [mm]: 770 Obremenitev mize [kg] (s / brez palete): 700 / 800 Zahtevani premer [mm]: 900 OPREMA Avtomatski menjalec palet, 2-kratni Velikost palete [mm]: 630 x 630 Čas menjave palete [s]: 13,0 Razširitev orodnega magazina TM180 (HSK-A100)

Poglej podrobnosti

Mali oglas

Maribor

66 km

Obdelovalni Center
GROB-WERKEG550 II

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G552-2158 U21156, potovalna razdalja osi X: 800 mm, pomik osi Y: 1.020 mm, pomik po osi Z: 970 mm, hitro pomikanje X-os: 65 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 80 m/min, vrtilni moment: 206 Nm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 640, premer obdelovanca (maks.): 900 mm, teža obdelovanca (maks.): 700 kg, obremenitev mize: 800 kg, premer vrtljive mize: 770 mm, skupna masa: 25.700 kg, največja hitrost vretena: 16.000 obr/min, delovne ure vretena: 5.200 h, dovod hladilne tekočine: 40 letvica, število vreten: 1, število mest v zalogovniku orodij: 126, dolžina orodja: 750 mm, Oprema: transportni trak za ostružke,

Poglej podrobnosti

Mali oglas

Obdelovalni center - univerzalni GROB-WERKE G550

Nemčija

5.343 km

Obdelovalni center - univerzalni
GROB-WERKEG550

Klic

Stanje: rabljeno, Leto izdelave: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm Machine weight approx.: 17 t Space requirement approx.: 6 x 3 x 3.2 m Table diameter: 770 mm Maximum table load: 800 kg Tool holder: HSK-A63 Maximum tool length: 465 mm Number of tool magazine positions: 60 Spindle speeds: 12,000 rpm Feed force: 8 kN kp Drive power: 25/35 kW 5 axes Gusdet Rmd Ijpfx Ab Tjk G550-1024 HSK A-63 Grob (model designation G550-1024): 4529h 1 spindle

Poglej podrobnosti

Mali oglas

Univerzalni obdelovalni center GROB G550a

Nemčija

650 km

Univerzalni obdelovalni center
GROBG550a

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.700 h, Krmilna enota Gedpsx D D Svefx Ab Tsuk Znamka: HEIDENHAIN Model: TNC 640 Pomiki Pomik X-osi: 800 mm Pomik Y-osi: 950 mm Pomik Z-osi: 1020 mm Dodatna oprema Dodatki: Dodatna paleta + enota za hlajenje hladilne tekočine Ta 5-osni univerzalni obdelovalni center GROB G550a je bil izdelan leta 2020. Ponuja napredne zmogljivosti za zahtevna obdelovalna dela. Razmislite o nakupu tega univerzalnega obdelovalnega centra GROB G550a. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Poglej podrobnosti

Mali oglas

Obdelovalni center - univerzalni GROB-WERKE G550 / 2

Nürnberg

470 km

Obdelovalni center - univerzalni
GROB-WERKEG550 / 2

Klic

Stanje: rabljeno, Leto izdelave: 2019, x-axis travel: 800 mm y-axis travel: 1020 mm z-axis travel: 970 mm Control system: TNC640 B-axis: 360° x 0.001° B-axis feed rate max.: 50.00 rpm A-axis: -185° / +45° x 0.001° A-axis feed rate max.: 25.00 rpm X-axis feed rate: 1 - 65,000 mm/min Y-axis feed rate: 1 - 50,000 mm/min Z-axis feed rate: 1 - 80,000 mm/min Rapid traverse X/Y/Z: 60 / 50 / 80 m/min Spindle speeds (stepless): 1 – 16,000 rpm Main drive power (100% duty cycle): 25.00 kW Main drive power (40% duty cycle): 32.00 kW Torque at 40% / 100% duty cycle: 206.00 / 159.00 Nm Spindle diameter (front bearing): 80 mm Tool holder: HSK-A63 Tool magazine capacity: 70 Max. tool length: 500 mm Tool diameter: 118 mm Tool diameter with free adjacent pockets: 260 mm Max. tool weight: 22.00 kg Chip-to-chip time: 4.2 sec. Pallet size: Ø 770 mm Workpiece weight: 800 kg Work envelope diameter: 900 mm Total connected load: 35.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 7.00 x 3.50 x H3.50 m 5-axis machining center with Heidenhain TNC640 control, Godjxn Amaopfx Ab Teuk integrated coolant system KNOLL KF220, KM high pressure 23 bar, through-spindle coolant, chip conveyor, Heidenhain TS640 touch probe, GROB spindle diagnostics, electromechanical tool length measurement, swivel axis calibration GSC, collision monitoring DCM Collision, BLUM laser for tool monitoring, tool cleaning system, kinematics set.

Poglej podrobnosti

Oglašujte tukaj