Preklopni gumb - dvojni stolpec

GRAEBENER GK 600

Leto izdelave: 2007, stanje: zelo dobro (rabljeno),

Leto izdelave: 1981, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can be processed. The line has been in operation until now and is available for inspection at any time in Nuremberg. The line consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to max. 330 mm width Calender Gross roller width: 1,200 mm Net roller width: 1,100 mm (max. film width) Pgodpfju Ttf Nox Agxsk Take-off unit and flying shears

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Podpfxotrhf Ao Agxsgk Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: novo, Pressure: 2.5 kN Stroke: 45 mm Throat depth: 90 mm Working height (min.–max.): 80–220 mm Podefv Av Ijpfx Agxjgk Table size: 120 x 60 mm Machine weight: approx. 22 kg Dimensions (L x W x H): 160 x 230 x 390 mm Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion system. It is used wherever constant pressure is required throughout the working process. Precisely manufactured; spindle hardened and ground; unlimited service life. Long spindle guide, optimal pressing force. T-slot according to DIN 650, milled centrally, T-slot nuts fit precisely.

Leto izdelave: 2013, stanje: dober (rabljeno), SICA-TRS-SY 25-160 R, PLANETARY PIPE SAW Application: Cutting and chamfering of PVC, PE, and PP pipes Equipped with chip extraction fan Min. diameter: 25 mm Max. diameter: 160 mm Year of manufacture: 2013 Machine location: Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Pjdpjvn A R Nsfx Agxegk The machine is my property.

Stanje: rabljeno, Leto izdelave: 1997, Press Force: 1000 t Frame Gap: 1260 mm Stroke: 315 mm Stroke Rate: 10, 21 – 42 /min Distance Table/Ram, largest stroke up, ram adjustment up: 1295 mm Table Area: 1250 x 800 mm Table Height above Floor: 670 mm Side Frame Opening: 830 mm Ejector Force in Table: 63 t Ejector Stroke in Table: 75 mm Ejector Force in Ram: 16 t Ejector Stroke in Ram: 23 mm Ram Area: 1250 x 800 mm Pedpfevuukuox Agxogk Ram Adjustment: 20 mm Transfer Feed Length: 0 – 250 mm Programmable Closing Stroke per Rail: 0 – 140 mm Transfer Unit Stroke Rate: 42 /min Drive Power: 135.0 kW Weight: 120.0 t Space requirements (W x D x H): 5.9 x 4.8 x 7.95 m Height above floor: 6.95 m Height below floor: 1.0 m with DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram counterbalance, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram lock, die clamping system for table and ram, motorized circulating lubrication, oil impulse lubrication, grease lubrication Press control: Siemens S5 - CNC 2-axis transfer unit (manufacturer Dreher, type STV-D model 350/100-SO, year 2008), control Siemens S7 - Cleaning system (manufacturer Beyss, year 1989) as is, stored dismantled, WITHOUT commissioning Press was installed at the previous owner in a soundproof cabin, which is NOT included in the scope of delivery Video of the machine available from the seller before dismantling

Stanje: rabljeno, Leto izdelave: 1995, Tlak 063 t Izvleček 260 mm Hod 12 - 120 mm Število hodov 30 - 130 / min Razdalja med mizo in batom, velik hod zgoraj, nastavitev zgoraj 495 mm Površina mize 800 x 560 mm Prehodna odprtina v mizi 220 mm Višina mize nad tlemi 800 mm Prehod med stenami ohišja 270 mm Površina bata 450 x 360 mm Pedpfx Ajvut Ewsgxsgk Nastavitev bata 120 mm Pogonska moč 5,5 kW Teža 5,0 t Dimenzije (ŠxDxV) 1,8 x 1,5 x 2,7 m Dovoljeno samo za samodejno delovanje v skladu s CE-standardom z brezstopenjsko nastavljivim pogonom, pnevmatsko sklopko-zavorno kombinacijo, mehansko prenapetostno zaščito v batu, fiksno mizo lahko si ga ogledate v delujočem stanju v našem skladišču

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), KUAG ROHRABZUG RA 110 3+3 E 6 caterpillar haul-off unit Year of manufacture: 2003 Caterpillars: 6 Diameter: Min 20 mm, Max. 170 mm Haul-off speed: 0.2 - 10 m/min Condition: Very good, ready for operation The haul-off unit is my property We speak Spanish Nous parlons français We speak English Sachal Extrusion Machinery D-26345 Bockhorn-Grabstede Germany Pgsdpfx Agop Analoxok

Stanje: novo, Leto izdelave: 2024, Pressure: 50 t Throat depth: 230 mm Stroke: 12–110 mm Stroke rate: 40–100 strokes/min Ram adjustment: 70 mm Table surface: 740 x 440 mm Table height: 840 mm Pass-through opening in table: Ø 140 mm Ram surface: 460 x 300 mm Ram bore: Ø 45 mm Total power requirement: 4 kW Machine weight: approx. 3.4 t Space requirement (WxDxH): approx. 1,500 x 2,500 x 2,510 mm Machine number: 16150 LED machine lamp Frequency-controlled stroke rate Counterbalance cylinder Gear wheels Sick light curtain for safety and cycle mode Motorized ram adjustment Machine feet Two-hand operation Foot control Central lubrication Hydraulic overload protection in ram Pneumatic clutch-brake combination Approved for manual loading operations Podpovfhqpjfx Agxjgk

Stanje: dober (rabljeno), Leto izdelave: 1977, 1 rabljena ekscentrična stiskalnica Proizvajalec: Helmerding Tip: EL 35 B Leto izdelave: 1977 Št. stroja: 5182 Tlačna moč: 350 kN Nastavljiv hod: 12 - 80 mm Nastavljiv hod batu: 70 mm Število gibov bata na minuto: 110 Nastavljiva miza: 150 mm Varnostna razdalja: 150 mm Zaviralna pot: 50 mm Pgedpfx Agswxxr Aexjk Teža: 2050 kg Opremljena z varnostnim ventilom za stiskalnico