Piła formatowa Gomad Gorzów

GOMAD PS 400

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 75 mm, največja širina rezanja: 1.200 mm, premer žaginega lista: 400 mm, Longitudinal and crosscut saw, well-maintained and in good condition. Year of manufacture: 1996, GOMAD Poland. We are the sole owner since new. The machine is equipped with a scoring unit for panel cutting and an additional guide for angled cuts. The saw blade moves up and down and tilts up to 45 degrees. Includes DTR documentation. Technical specifications: Nkedpfxju Axf Ne Abbet - Scoring blade with separate 0.75 kW motor - Blade tiltable 0–45° - Side sliding table - Upper guard on arm - Polish manufacturer: Gomad - Heavy-duty, stable, and robust construction - Table extension and widening - Cutting width to the right: 120 cm - Main saw motor: 6 kW, 2880 rpm - Scoring blade speed: 8,500 rpm - Saw tilt range: 0–45° - Max bore diameter of main saw: Ø30 mm - Max blade diameter: 400 mm - Bore diameter of scoring blade: Ø22 mm

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2024/121/47, premer žaginega lista: 420 mm, GRAULE crosscut and mitre circular saw Nkjdetwz Tlepfx Abbot Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Cutting height: 170 mm Blade tilted at 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine tiltable from behind on both sides by hand crank: from 90° to the left up to 45° and to the right up to approx. 30°, up to approx. 60° 1 pc. TCT (carbide-tipped) circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative hook angle for wood 1 pc. machine stand

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Nksdpfx Abod H Sc Esbjt Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 74-4-10, Panel Saw ALTENDORF F90, Year of Manufacture 1974 Machine No.: 74-4-10 Manufacturer: Altendorf, Germany Saw stroke (mm): 2600 Cutting width (mm): 1,300 Nkjdpfx Abjipvrbebot Max. cutting height (mm): 130 Max. saw blade diameter: 400 mm Main motor: 5.5 kW With scorer unit 4 speed settings Saw blade height adjustment: manual Approx. weight (kg): 780 Technical specifications subject to change

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Planer table length: 2720 mm Adjustment of planer table: Lever Hollow and pointed joint adjustment: No Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Nksdpfxsgr Udvj Abbet Motor power: 7 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 870 kg

Stanje: rabljeno, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, specific pressing force max. 2 kg/cm² Heating 2x 1.8 kW - Long-belt sander 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Sliding table saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control with main and emergency stop switches Machine on undercarriage Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended. Sale is made in "as is" condition. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. The following applies: "bought as seen". Nkodpfsxl Ha Sjx Abbjt Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery conditions: ex stock.

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. cutting depth per pass: 8 mm Minimum workpiece length: 260 mm Cutterblock diameter: 120 mm 4 knives: 35x3x640 mm Cutterblock speed: 4500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction port diameter: 150 mm Standard Equipment and Accessories - Automatic thicknessing table lift with 2 speeds, including micrometric positioning - Thicknessing table with vertical movement via 4 steel lead screws - Electronic 2-axis control for the setting of: * programmed thicknessing table position * feed speed - Infinitely variable electronic feed speed from 4 to 20 m/min via inverter - Feed speed adjustment based on maximum main motor power consumption - Ribbed steel infeed roller - Two upper rubber-coated outfeed feed rollers - Interchangeable feed rollers - Independent pneumatic pressure regulation for upper feed rollers - Motor power 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta start: * S1] 7.5 kW / 10 HP 50 Hz (8.8 kW / 12 HP 60 Hz) * [S6 -40%] 9 kW / 12 HP 50 Hz (11 kW / 15 HP 60 Hz) Nksdpfx Absw Tfybsbet Safety/Protection - Noise reducing guards at infeed and outfeed - Micro safety switch on the guard cover - Emergency stop switches at the front and rear of the machine - Lockable main switch - Motor protection circuit breaker - Low voltage control circuit (110 Volt) - Automatic motor brake - C.E. Declaration of Conformity Production code: S 7 109999 Standard safety regulations 530314 TERSA – cutterblock (monoblock version) with disposable reversible cutters 083201 Stand 930731 Voltage 400 V EU R02017 L'invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short term Location: Flörsheim

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Nksdpfxedqzcxe Abbot Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Ideal for demanding craftsmen and joiners - The extra-long one-piece surfacing tables allow for easy planing of workpieces - Worktables are made of grey cast iron, making them resistant and permanently flat; parallel-opening surfacing tables with tension spring support ensure quick and convenient changeover - Thanks to the fixed mounted extraction hood, there is no need to reconnect the extraction hose when switching operations; this saves valuable working time - Helical-toothed steel infeed roller ensures constant and uniform wood feed - Rubber-coated outfeed roller at the thicknessing exit ensures even wood outfeed - Material feed with four speeds - Thicknessing table adjustment via handwheel with integrated planing height indicator - DIGITAL version: with electric thicknessing table adjustment and digital display - Start and stop switch positioned for operator convenience - Powerful industrial motor - The high machine weight guarantees maximum precision and smooth operation - Preparation for slot mortising unit - Quality Made in Italy - With spiral cutterhead - With fold-down cutterhead guard - Total table length: 2250 mm - Max. cutting depth: 5 mm - Working width: 520 mm Nedpfsx Hbrnsx Abbokt - Thicknessing height: 3 - 240 mm - Number of cutter knives: 66 pcs - Cutterhead speed: 5000 rpm - Motor: 9 kW - Feed speed: 5/8/12/18 m/min - Extraction port: 120 mm Weight: 695 kg Dimensions: 2250 x 1440 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Nkedpfxegtm U Aj Abbst Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES