Polpriklopnik z nizko nakladalno ploščadjo

Goldhofer STN-L3-39/80 3Achsen hydraulische Rampen ABS/EBS

Stanje: rabljeno, lastna masa: 12.640 kg, največja dovoljena obremenitev: 28.360 kg, skupna masa: 41.000 kg, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 9.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 910 mm, prostornina tovornega prostora: 22 m³, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17.5, voznikova kabina: drugo, emisijski razred: noben, Available for immediate rental from 4 weeks - Contact O. Schinke Rent – please contact Mr. Schinke Platform length: 3,800 mm, loading length: 9,400 mm, loading width: 2,550 mm, approach slope: 1,300 mm Rear loading ramps: 2,950 x 1,700 x 900 mm, approach angle approx. 11 degrees, hydraulic ramp lifter, hydraulically adjustable ramp Greasing aid, Smart Board, load bed extension Spare wheel holder including spare wheel, storage box 1 front support: telescopic aluminium support leg for unhitching 2 foldable rear support legs with spring holders. Please note: operating the hydraulic components requires a suitable truck hydraulic system with supply and return lines (not included in delivery). Also available as a long-term rental vehicle! Contact us for your individual offer. * ABS * Ackermann steering on 2nd and 3rd axle * Side underrun protection * Rubber-metal pads on loading ramps * Plastic toolbox * Single lift axle * Platform board walls * Hydraulic ramp lifter * Hydraulically adjustable ramps * Spare wheel holder * Beacon * SAF axles * Smart Board * Supports Bodpfsyk Dcvsx Afnswi * Warning package * Central lubrication system We expressly reserve the right to prior sale as this item is also listed on other platforms. Information on accessories is given without guarantee. Changes, prior sale, or errors excepted. We strongly recommend and offer an inspection and test to avoid misjudgement regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. We handle all formalities and hand over the vehicle with your requested temporary registration plates for an extra charge. Images are partly edited and serve only as an initial preview. If interested, please contact us and request up-to-date photos.

Stanje: novo, največja dovoljena obremenitev: 36.360 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck (Gooseneck): * Gooseneck with front corners tapered approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) Bwsdpfx Ajyhkq Uefnsi * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square profile climbing strips approx. 15 x 15 mm as well as lower-width extensions * Between the first and second axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load 5 t/each * Recess in the bevel as well as projecting into the loading area for excavator dipper stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for fastening ratchet straps (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm hardwood covering * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL 841GL system * Rims in silver grey Including the following additional equipment: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Rear electro-hydraulic unit, under the loading area * On the gooseneck, aluminium side and rear plug-in walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the tapered gooseneck * 2 pairs of WADER container pockets in the loading area for one 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * 3 additional pairs of removable, galvanized covers over the wheel recess – max. point load 3.5 t/pc * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hang-in intermediate table, approx. 300 mm wide * Interm