Košara za drobne dele / košara za pranje

Glogar

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Fodofbt Siopfx Af Sega Including the following features: • Fully made of stainless steel 1.4301, inside and outside • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Stanje: pripravljen za uporabo (rabljen), With hydraulic pump. Fgodpfx Aohw E D Sef Soa

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Spray cleaning system – parts washer – NEW UNIT / Pilot plant system Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Usable height: 900 mm Maximum load weight: 600 kg Tank capacity: 500 liters, spray pressure: 5 bar, 400 l/min, heatable up to 90°C System constructed entirely from stainless steel 1.4301 (AISI 304), pickled throughout Incl. loading cart in front of the unit Included special equipment: - Steam extraction incl. condensate return - Automatic water refill and level monitoring - Removable coarse filters in return line to wash tank - Detachable basket surround Fgjdpfx Afowitvqs Ssa - Prepared for retrofitting an oil separator - Weekly timer for heating - E-spray tube for improved component cleaning - Inspection hatch in tank area - Siemens S7 1200 controls with color touch panel by Weintek Commissioning by qualified specialists can be arranged at additional cost upon request.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), HD Wash Table – HD Brush Wash Table The wash table features an adjustable 60 bar high-pressure pump, allowing cleaning to be performed in a closed workspace. Cleaning is achieved using an aqueous degreaser (10 kg included in delivery) at approximately 45°C. Inspection window with integrated lighting Medium filtration via cartridge filter Convenient operation via foot switch Includes turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Load capacity: 50 kg Fgjdpfxehl If Tj Af Soa Working pressure: adjustable up to max. 60 bar Pump capacity: 14 l/min Washing temperature: adjustable up to max. 45°C Tank capacity: 170 l Heating power: 4,000 W Total power: 8.0 kW Voltage: 400 V AC 1P+N+PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with lid open: 1,480 x 991 x 2,080 mm

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Fgjdpfxjpgmufo Af Ssa Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, HD Washing Table – HD Brush Washing Table The washing table features an adjustable 60 bar high-pressure pump, allowing for cleaning operations within an enclosed workspace. Cleaning is achieved using an aqueous degreaser (10 kg included in delivery) at approximately 45°C. - Viewing window with integrated lighting - Media filtration via cartridge filter - Convenient operation with foot switch - Includes rotary table Technical Data: - Working surface: 1,200 x 700 mm - Usable height: 400 mm Fgodpjhl If Nsfx Af Soa - Load capacity: 50 kg - Operating pressure: adjustable up to max. 60 bar - Pump capacity: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank volume: 170 l - Heating power: 4,000 W - Total power consumption: 8.0 kW - Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz - Machine weight: approx. 180 kg - Overall dimensions with lid open: 1,480 x 991 x 2,080 mm

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), HD wash station – HD brush wash station The wash station is equipped with a fully adjustable 60 bar high-pressure pump, allowing for thorough cleaning in an enclosed work chamber. Cleaning is performed using an aqueous degreaser (10kg included in delivery) at approximately 45°C. - Viewing window with integrated lighting - Medium filtration via cartridge filter Fgsdpfed H Umrjx Af Sja - Convenient footswitch operation - Includes rotary table Technical Data: - Working surface: 800 x 600 mm - Usable height: 400 mm - Load capacity: 50 kg - Operating pressure: adjustable up to max. 60 bar - Pump capacity: 14 l/min - Washing temperature: adjustable up to max. 45°C - Tank volume: 100 l - Heating output: 3,000 W - Total power: 7.0 kW - Voltage: 400 V AC 1P+N+PE; Frequency: 50 Hz - Machine weight: approx. 140 kg - Overall dimensions with opened lid: 1,100 x 910 x 2,020 mm

Stanje: novo, Leto izdelave: 2025, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 8.000 obr/min, 1 Mehrspindel-Drehautomat TORNOS SAS16-DC im Wiederaufbau - neuer Schaltschrank SIEMENS oder FANUC, wählbar – Abholtisch mit Bremse – verstellbarer Anschlag mit Gegenbetrieb – 3 unabhängige Vorschubsysteme – mehrere Werkzeughalter und Bohrvorrichtungen – Trommelstangenführung mit Unterstützung – Optionen: automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Querschlitten, etc. Fjdpfxjugl S Is Af Sjga Kontaktieren Sie uns.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Parts Cleaning Machine / Combination Spray Cleaning System Type L101 HP Fully automatic hot water parts washing machine with basket drive via gear motor, stainless steel wash pump (manufacturer: Lowara), spray system with stainless steel nozzles. Additionally, manual cleaning with high-pressure nozzle (60 bar) and foot switch, air blow-off gun, large inspection window with gauntlet gloves, LED interior lighting. - Basket diameter: 910 mm - Useful height: 490 mm - Max. load weight: 200 kg - Spray pressure (wash pump): 2.3 bar - Spray pressure (high-pressure pump): adjustable up to max. 60 bar - Tank volume: 175 liters - Heating: electrically adjustable (ambient temp. to 60°C) - Machine dimensions (LxWxH): 1,300 x 1,500 x 2,100 mm - Empty weight: approx. 200 kg ++ Freely adjustable washing timer (minutes and hours) ++ Complete cleaning machine (interior and exterior housing) made from stainless steel 1.4301 Fgodod R Ahlspfx Af Sja ++ Water circulation system and loading basket made from stainless steel 1.4301 ++ Bath cover with fine filter (2,000 micron) ++ Hour meter ++ Steam extraction including condensate return ++ Omron timer for time settings in seconds/minutes/hours OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Ultrasonic Cleaning System - Ultrasonic Cleaning Device Chamber made of stainless steel 1.4401 (AISI 316L) - including insulated hinged lid - including level monitoring / dry-run protection Fjdolccuzopfx Af Sjga - including 1 stainless steel parts basket - Bottom-mounted ultrasonic transducers, frequency: 25 kHz, power (effective/peak): 600/1,200 watts - Heating adjustable up to 80°C; power: 2,600 watts - Basket dimensions (LxWxH): 320 x 320 x 280 mm - Tank dimensions (LxWxH): 420 x 400 x 350 mm - External dimensions (LxWxH): 520 x 650 x 850 mm - Maximum basket load capacity: 30 kg - Unit is mobile

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.000 h, Kovo Staněk TZNZ 5-11/16-36 (2020) – Vysoce výkonný závěsný tryskací stroj Typ: závěsná/háková dráha (CE) • Rok výroby: 2020 • Celková hmotnost: 12 000 kg • Stav: výborný, okamžitě připravený k provozu. Kapacita a výkon Max. obrobek: Ø 1600 × 3600 mm (V) Max. nosnost háku: 1000 kg Tryskací kola: 5 × 11 kW, rotor Ø 350 mm (každé samostatně dávkované) Fgedpfx Ajxpiw Usf Sea Zásobník brusiva: cca 1800 kg Spotřeba vzduchu: 20 m³/h při 6 barech Hluk: ≤ 85 dB(A) Rozměry stroje (Š × H × V): 4730 × 5070 × 6520 mm Přívod: 400/690 V, 50 Hz • Řídicí napětí: 24 V DC Řízení & automatizace PLC (platforma NX) s dotykovým HMI a vzdálenou servisní podporou. Až 99 programů s individuálním nastavením: doba tryskání, otáčky turbín, rotace a rychlost háku, úhel natočení bloku turbíny, servo řízený tok brusiva pro každé kolo, automatický start/stop dopravníku. Diagnostika, plné blokování pohybů při otevřených dveřích. Opotřebení a konstrukce Tryskací komora vyložena deskami XAR500 (5 mm) a manganovou ocelí X120Mn12 ve tvářených/silně namáhaných zónách; v místech dopadu vyměnitelný pryžový obklad. Vnitřky kol (lopatky, koše, obložení) z nástrojové oceli 1.2379/X153CrMoV12 (~62 HRC). Masivní svařované těleso bloku turbíny. Servisní plošina s bezpečnostní brankou a funkcí Total Stop. Okruh brusiva Určeno pro ocelový granulát S330 (počáteční náplň cca 1,5 t). Výtah → pneumatický separátor → centrální zásobník v okruhu; magnetická/pneumatická čistící stanice udržuje kvalitu média. Servo dávkování do každého kola zajišťuje rovnoměrnou intenzitu a nižší spotřebu. Odsávání & filtrace Filtrační jednotka CIPRES CARM, ventilátor 7,5 kW, automatická zpětná klapka; potrubí s automatickým ventilem pro proplach komory na konci cyklu. Manipulační systém Motorová jednokolejná dráha s regulací rychlosti; servopohon otáčení a zdvihu háku; pneumatický rozbočovač dráhy; dva zdvihy 1,1 kW. Časový cyklus umožňuje zakládání další dávky během tryskání. Využití Kování, odlitky, svařence a obecné ocelové konstrukce – příprava povrchu před lakováním, žárovým zinkováním nebo povrchovou úpravou. Vysoký výkon, opakovatelné výsledky Sa 2½–3. Klíčové přednosti 5 kol pro vysoký výkon a pokrytí • Řízení PLC a přesné servopohony • Obložení XAR a manganová ocel pro dlouhou životnost • 12tunová evropská konstrukce • Nízká hlučnost ≤ 85 dB(A). Prohlídka možná po dohodě prostřednictvím platformy.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Spray Cleaning System – Parts Washer with Hinged Door 1-tank configuration (washing), tank volume 320 liters Basket: LxW 1,100 x 1,100 mm Usable height: 800 mm Fgodpfx Afod Rkmxo Ssa Max. loading weight: 700 kg Washing pump pressure: 4.3 bar, pump output: 5.5 kW Heating (electric): 20 kW; heatable up to 80°C Control: Siemens Logo including – Steam extraction and condensate return – Automatic water refill – Automatic chemical dosing (0.8 – 5.5%, adjustable) – Full system insulation – Entire unit constructed from stainless steel 1.4301 – Basket surround (removable on one side) – 7-day timer for electric heating – Electric spray tube h = 450 mm – Preparation for oil separator (electric and mechanical) available New machine; currently in use for washing tests at our technology center

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Spray Cleaning System - Parts Washing Machine - NEW SYSTEM / Pilot Plant Basket usable dimensions: L x W 1,100 x 1,100 mm Usable height: 800 mm Fodpfx Afoc Udkbe Soga Max. load weight: 700 kg Tank volume: 320 liters, spray pressure: 4.3 bar, heatable up to 90°C System made entirely of stainless steel 1.4301 (AISI 304), pickled by immersion System incl. loading trolley positioned in front of the unit Included special equipment: - Steam extraction incl. condensate return - Automatic water refill and level monitoring - Filter unit (coarse filter) in return line to the wash tank - Preparation for retrofitting of oil separator - Weekly timer - Electric spray pipe for optimized component cleaning - Inspection hatch in tank area - Siemens Logo control unit with color touch panel (4.3") Commissioning by qualified personnel can be arranged at additional cost on request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, temperatura: 60 °C, nosilnost: 250 kg, SUMMA DC3/OSK Rotary Basket / Drum Cleaning System, Carousel Degreasing System with Dryer The chamber rotary machine from the Czech manufacturer operates on the pressure-spray principle. This degreasing unit offers three surface cleaning options and is suitable for the degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770 x 500 mm Max. workpiece weight: 250 kg Electrical power: 23 kW Fgsdpfx Afjwty H Ds Sea Bath temperature: max. 60 °C Air temperature: max. 120 °C Bath heating (rinse): 12/6 kW Drying air heating: 13.5 kW Aerosol pressure: 0.28 MPa Pump capacity: 70 liters/minute Machine weight: 520 kg Machine dimensions: 1800 x 1800 mm Height: 1500 mm Do you need more information? We are happy to assist you! Please contact us using the contact form or call us. This listing was automatically translated. Translation errors may be possible.

Stanje: novo, Leto izdelave: 2026, Ultrazvočna pralna naprava - ultrazvočni čistilni aparat z vgrajenim lovilcem olja in izoliranim nagibnim pokrovom. Talni ultrazvok, frekvenca: 25 kHz. Moč (učinkovita/vršna): 750/1.500 W. Ogrevanje nastavljivo do 80°C; moč: 4.000 W. Dimenzije košare: D x Š x V 570 x 320 x 250 mm. Dimenzije bazena: D x Š x V 650 x 400 x 350 mm. Dimenzije naprave: pribl. 1200 x 550 x 750 mm. Največja obremenitev košare: 30 kg. 1 kos nerjaveče košare je priložen. Naprava je premična. Fgodpfx Aedz T Nysf Ssa