Stroj za striženje zobnikov

Gleason-Hurth ZS 130 T

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 26.583 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A0248, premer obdelovanca (maks.): 130 mm, TECHNICAL DETAILS Maximum workpiece diameter: 130 mm Number of axes: X, Z, A, B, C (0–3) Electrical Equipment Connected load: 47 kVA Voltage: 400 V Frequency: 50 Hz Fedpewmc Idefx Af Ssga

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 180 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.5 kW - Minimum C-axis resolution: 0.001° BUSHING HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Travel X/Y: 50/325 mm FRONT TOOL POST - Number of positions: 4 SUB OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Power-on hours: 31,902 h - Spindle hours: 12,146 h EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Parts catcher - Parts conveyor belt Fgedpfeuha Sljx Af Ssa - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar loader: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Stanje: dober (rabljeno), Leto izdelave: 2013, Fanuc Robodrill α-D21SiA5 Machining Center TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Serial Number: A04B-0102-B114#BDH Year of Manufacture: 2013 Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Traverse Paths X-axis: 300 mm Traverse Paths Y-axis: 300 + 100 mm Traverse Paths Z-axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 stations Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Fgsdpfxexflq Ae Af Soa Permissible Table Load: 200 kg Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF SUPPLY Includes (not a complete list): - Fanuc Robodrill α-D21SiA5 Machining Center - 4th Axis Rotary Table - Coolant Pump and Chip Tray - Precise scope of delivery according to photo documentation No guarantee can be given regarding the correctness, completeness, or up-to-dateness of the information provided.

Stanje: skoraj kot novo (rabljeno), Manesty D3B tablettenpers Seriennummer: 24D117 Fjdjiy Nnyspfx Af Sega Manesty 16-Stationen-Tablettenpresse, bis zu 500 Tabletten pro Minute, maximaler Tablettendurchmesser 25 mm, maximale Fülltiefe 20 mm, 3-Phasen-Anschluss.

Stanje: dober (rabljeno), Leto izdelave: 2000, Dolžina mize: . mm Širina mize: . mm Fsdpfx Afeqn A Ryo Sega Rezalne glave: . Kosov na zalogi: 2 Skupna priključna moč: . kW Približna teža stroja: 1478 kg

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm (8x stepless) Clamping diameter: 26 mm Feed range x-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MT5 Tailstock quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dimensions (LxWxH) approx.: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobbing cutters, with or without thread pitch). Back turning and relief grinding possible from the front, the rear, and along the machine axis. Main drive via 8-step manual gearbox. Feed gearbox designed as a 12-step manual gearbox. Swivel range of the rear slide = 360°; Swivel range of the cross slide = 360°. Chuck is a taper disk Ø 200mm with MT5. Equipment: Mandrel Ø 49.5 x 400mm ARBAH-L 3+1 measuring system FRENIC 5000G11 frequency inverter 3-jaw chuck Ø 250 mm Fjdpfx Asvbhv Rjf Soga in good condition.

Leto izdelave: 1998, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, SERAP CRUST FLOW P ID št. 2797 Tunel Serap Crust Flow P omogoča popolno zmrzovanje skorje občutljivih in mehkih živil, kot so ekstrudirani piškoti, testenine, pene, pripravljene jedi, sladoled ipd. Primeren je tudi za zamrzovanje mesnih izdelkov pred rezanjem. Dimenzije: 320 x 120 cm, višina 165 cm, širina transportnega traku 40 cm. Fodpfx Ajumbyief Sjga

Leto izdelave: 2008, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The system was used for grinding oil filtration in carbide machining applications. Cooling unit: Eckert 3 filter towers with sludge bag Fgedpslczcwofx Af Ssa Filtration capacity: 80-100 l/min Filtration fineness: 3-5 µm The description refers to the system with a sludge drum; technical data are similar. Original user manual available in hard copy. Videos available upon request.

Stanje: dober (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, Model: HEC 400D, Year: 2015 Control system: Siemens Sinumerik 840D Travel X/Y/Z = 650 x 650 x 650 mm 2-station pallet changer, pallet size: 400 x 400 mm NC rotary table 360° x 0.001° 80-position tool changer Tool holder: HSK 63 Spindle speed: 15,000 rpm Fgjdsuav H Nepfx Af Soa Internal coolant supply (IKZ) 50 bar Chip conveyor, band filter, coolant temperature control, spindle cooling Sound and control cabinets Operating hours: 43,698 Spindle hours: 5,401

Stanje: dober (rabljeno), Leto izdelave: 2002, Wheel diameter - max. 275 mm Wheel width 55 mm Module - max. 6 Fgodpstumrpefx Af Sja Module - min. 1 Control unit 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m