Avtomatski stružnica

Gildemeister AS-25

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), Two identical Gildemeister six-spindle automatic bar turning machines, each with the corresponding bar loading magazines, are available. Number of spindles: 6, maximum workpiece diameter: 25 mm, spindle speed: 8,000 rpm, spindle bore: 32 mm, maximum bar diameter: 32 mm, maximum bar length: 3,300 mm. Machine dimensions (X/Y/Z): approx. 8,000 mm / 2,000 mm / 3,000 mm. Weight: approx. 5,000 kg. Including bar loading magazines. Dusdpfx Aoudbmveflel

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm Dodpfxehzbipo Afljul - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Double-spindle CNC lathe with 2 spindles, 3 turrets, and 3 Y-axes Each turret with 15 stations, BMT 44 Driven tools 2x C-axis 3x Y-axis Control: Fanuc 32i-TB Bar capacity: 65 mm Left spindle: 15/11 kW, Hainbuch Spanntop mini Axzug size 65 Right spindle: 11/7.5 kW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar feeder interface Coolant system with separate 200 l tank Cooling unit High-pressure at turret 1-3 via M-function 15 bar / 40 l/min Dodjvxu Eaepfx Aflsul 2x Brinkmann pumps Renishaw tool measurement for all turrets Tool monitoring for spindle and driven tools Spindle flushing through sub spindle (IKZ), Deublin rotary union Hinged belt conveyor Transformer Immediately available

Stanje: rabljeno, Leto izdelave: 2011, Bar diameter: 32 mm Spindle bore: 38 mm Turning length: 320 mm Spindle speed: 8,000 rpm C-axis: 0.001° Sub-spindle: Pick-up station: 32 Turning length: 150 mm Spindle speed: 8,000 rpm C-axis: 0.001° Number of tools: 4+7+6+10 = 27 Number of milling stations: 4+4 Control unit: Mitsubishi M70 Number of axes: 5 + 2x C-axis (7 total) Chip conveyor: yes (LNS) Total power requirement: 7.5/5.5 kW Machine weight: approx. 3,300 kg Space requirement: approx. 2.5 x 1.2 x 1.82 m plus FMB CNC sliding head lathe Citizen A32-VII PL, year of manufacture 08/2011 with FMB Turbo 3-36 bar feeder Very good condition! Dujdpfx Aow Ed Tfsfljl Main spindle motor and bearings are new. Includes all accessories, clamping devices, manuals.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL STATION - Number of positions: 8 BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total connected load: 11 kVA WEIGHT AND DIMENSIONS - Required space: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 13,837 h ACCESSORIES Duedpfx Afjuhbbzjlel - Control: Fanuc Oi-TD - 3-color status light - Driven guide bushing - Parts removal - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire extinguishing system * NB: Functionality not guaranteed. Inspection by a qualified company on the part of the buyer is recommended. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 180 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.5 kW - Minimum C-axis resolution: 0.001° BUSHING HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Travel X/Y: 50/325 mm FRONT TOOL POST - Number of positions: 4 SUB OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Power-on hours: 31,902 h - Spindle hours: 12,146 h EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank Dodpfxjuha Sle Afljul * with high-pressure pump * with paper filter - Bar loader: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Please contact us for further information and images via email (at) or Dujdpfsnah Tdox Aflel *

Stanje: rabljeno, Tehnične podrobnosti: Premer vretena: 60 mm Dolžina struženja: 45 mm Premer struženja: maks. 56 mm Dodpfx Afju Iwyioloul Globina vrtanja: maks. 70 mm Hitrost vrtenja: 48 - 1500 (vreteno) min⁻¹ Rezanje navojev: hitrost: 24 - 750 min⁻¹ Revolverska glava - število postaj: 8 Skupna potrebna moč: 5,5 kW Teža stroja pribl.: 2,4 t Potrebni prostor pribl.: D:2,1x1,0x1,8 m Krivuljsko krmiljen stružni avtomat po šabloni. Obdelovanec je pritrjen z vpenjalno pušo. Revolverska glava: diskasti revolver Hahn&Tessky Esslingen, hod orodja 80 mm, nastavitev 36 mm, razdalja vpenjalna puša/revolverska glava min./maks.: 72/188 mm 2 kosa vzdolžnih suportov, hod 45 mm 2 kosa odreznih suportov, hod pribl. 40 mm Sistem za hlajenje Stroj ni priključen. Prodaja po odkupni ceni.

Stanje: dober (rabljeno), Leto izdelave: 2009, obratovalne ure: 48.570 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Proizvajalec: MIYANO Tip: ABX-64SY Leto izdelave: 2009 Krmiljenje FANUC 31i, pogonjena orodja, revolver glava, os C, trak za transport delov, trak za odvod ostružkov, Duedpfx Aexzrpweflol prijemalo za dele, magazin za podajalnik palic Multifeed

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Hydraulic 400-ton column press suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Accumulator with approx. 4 nitrogen bottles e) Table size (clamping area): 2700 x 1700 mm (front view, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer specification h) Table, ram, and press head are stress-relieved annealed i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping area 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 mm (floor area) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light curtains 14 mm on front and rear sides p) Recirculating oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision-milled s) Side-monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m away from the press u) Pressure adjustment from 50 to to 400 to (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programming mode, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swiveling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted Dsdpjg Iihwofx Aflsul bb) Installation, commissioning, and training available at extra cost The hydraulics of the presses we offer are completely assembled using components from BOSCH-REXROTH/Parker/HAWE. Only components (SIEMENS) that are readily available in Germany are used in the control cabinet. All safety equipment, except the light curtains, is supplied by SICK. The control system is supplied by SIEMENS (S7 1500) including the 15-inch touchscreen monitor. The SIEMENS remote maintenance unit SECOME-Ethernet is included in the scope of delivery. SPECIAL FEATURE: Our design, featuring two press cylinders and the accumulator, allows full performance with a main motor of just 90 kW. Please refer to section 1.3 for technical details. Technical Data Design Type of press: Column press Thermally neutral: 80 – 120°C Number of operator sides: 2 Forces Press force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time (closed tool, steel on steel): max. 2 sec. Dimensions – intended minimum tool height: 600 mm Max. opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 tons Speeds (see attached cycle diagram) Rapid closing: 100 - 450 mm/s Pressing speed at F max.: