Stranski mlin Getecha GRS

GETECHA GRS 300 A1.1.1 (art.10105)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, moč: 1,5 kW (2,04 KM), Tria plastic mill, shredder, granulator for sale in excellent condition Manufacturer: TRIA 20-15/BL-T Power: 1.5 kW, 50 Hz, 380 V Year of manufacture: 1997 Feed opening: 200 x 230 mm Rotary knives: 3 pcs Dkedpfjra N A Nox Aplol Fixed knife: 1 pc Discharge opening: 60 mm Final product size: 3–5 mm Throughput capacity: approx. 30 kg/h.

Stanje: rabljeno, prevoženi kilometri: 110.646 km, moč: 118 kW (160,44 KM), prva registracija: 07/2013, vrsta goriva: dizel, lastna masa: 4.990 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, medosna razdalja: 3.690 mm, gorivo: dizel, barva: rumena, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 7.300 mm, dolžina tovornega prostora: 5.498 mm, širina tovornega prostora: 2.447 mm, višina nakladalnega prostora: 2.125 mm, Leto izdelave: 2013, gradbena višina: 3.300 mm, Oprema: ABS, dvižna zadnja plošča, računalnik na krovu, Transmission damage! The pre-owned Iveco EuroCargo ML 75 E 16 P presents itself as a reliable box van with an internal body length of 5.5 metres. The vehicle is equipped with a 3,920 cc diesel engine delivering 118 kW (160 hp) and complies with the Euro 5 emissions standard. The automatic transmission ensures a comfortable driving experience. With a mileage of 110,646 km and first registration in July 2013, the vehicle is in good condition. The vehicle is functionally upgraded with useful features such as a tail lift and air suspension. The vehicle measures 7.3 metres in length, 2.3 metres in width, and 3.3 metres in height. It has a wheelbase of 3,690 mm and a gross vehicle weight of 7,490 kg, making it ideal for commercial use. Dkodpfx Aexmt Ixsplel The van previously had one owner and is currently finished in yellow. The vehicle is equipped with an environmental sticker Category 4 (Green), allowing access to low emission zones. Sale only to trade (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Stanje: rabljeno, Cooling Unit, Cooling Water Recooler, Water Cooler, Chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 6 kW Dedpfopu R Ncex Aplekl Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank capacity: approx. 35 litres Circulation pump flow rate: 40 litres/min Pump power: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirements (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Rotor diameter: 450 mm, Cutting chamber opening (X/Y): 900 mm / 540 mm, Rotor knives: 3 x 32, Stator knives: stationary, Drive power: 37 kW, Throughput capacity: 900 kg/h, Machine dimensions (X/Y/Z): approx. 1600 mm / 1700 mm / 1500 mm. Documentation available. Dsdpfx Apjucw S Selokl

Stanje: rabljeno, Screw Compressor KAESER Type BS 50 Serial No. 402852 Year of manufacture: 1990 Free air delivery: 5 m³/min Operating pressure: 7.5 bar Main motor power: 30 kW Dkedpfxsiyu Ifo Aplol Mains connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 operating hours (read off) - 749.00 load hours (read off) - Soundproofed Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a backup compressor and has only a few operating hours

Stanje: rabljeno, Leto izdelave 2003 2,2 kW 3,0 KM vključno z dokumentacijo, COC Dksdpfx Aew Upn Eeplsl

Stanje: dober (rabljeno), Leto izdelave: 2023, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, moč: 30 kW (40,79 KM), širina rotorja: 1.000 mm, Dvoosni drobilnik KS-1000/2 Odlično stanje približno 450 delovnih ur. Noži rotorja so zaradi vlažnega materiala rahlo zarjaveli, vendar je stanje še vedno zelo dobro! Prenovljeno stanje: – Nova barva Dedpoyrfgrefx Aplskl Vključno z elektro omaro, okvirjem in lijakom

Stanje: novo, Leto izdelave: 2025,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: Dedex A U Ncopfx Aplokl The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 22.795 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5039, skupna masa: 600 kg, moč: 18,5 kW (25,15 KM), vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Vijačni kompresor z regulacijo frekvence in integriranim vračanjem toplote Proizvajalec: Kaeser Tip: ASD 32 Dobava: 8 bar - 3,2 m³/min Moč motorja: 18,5 kW Priključek za stisnjen zrak: G 1¼ Maks. razpoložljiva toplotna moč: 16,4 kW Vključno s celotno dokumentacijo + CE certifikat Naslednje vzdrževanje pri 24360 ur Teža: 600 kg Potrebni prostor: 1350 x 921 x 1505 mm (D x Š x V) Djdow Trghjpfx Aplekl Stroj je možno prikazati na lokaciji. Vse navedbe brez jamstva. Vmesna prodaja pridržana.