Stroj za upogibanje cevi

Gelber-Bieger S03-60

Stanje: rabljeno, Leto izdelave: 1980, PIPE BENDING MACHINE LANG TYPE EL90 Ihsdsrq D N Rjpfx Adkew Ø 90

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that match those of the technical and operational documentation of a new machine, complies with the WOT acceptance standards as well as Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul, delivery time 3.5 months from placing the order. Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) Ihjdjv Ab Dqepfx Adkow - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Rear safety guard along the entire machine length - Inverter including soft-start function and potentiometer for stepless speed control

Stanje: pripravljen za uporabo (rabljen), Maximum forming capacity at full length: 9 gauge (mild steel), equivalent to approx. 3.8 mm; max. forming length: 3200 mm; minimum flange height: 6 x material thickness; clamping beam speed: maximum speed: 91.44 mm/s, downward: 39.88 mm/s; bending speed: 1879.6 mm/s; bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160 mm / 2220 mm / 1780 mm; weight: approx. 5300 kg. Ihsdpfetia Hhsx Adkjw

Stanje: rabljeno, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1845 mm Table Length / Clamping Length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot spacing: 263 mm Total length: 6230 mm Iodpfx Adsbn Amfjkshw Total plate height: 350 mm Weight: 11 t

Leto izdelave: 2004, stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Motor-driven NC rotary table Continuously adjustable rotary table (increment 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Overall height: 660 mm Centering bore: 100 H6 mm Clamping slots: 7 units Slot dimensions: 22 H7 mm Slot spacing: 160 mm Position measurement via rotary encoder ROD 250. Ijdpsfk R Tdjfx Adkjhw Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization

Leto izdelave: 1999, stanje: rabljeno, TRAGFÄHIGKEIT 2000 kg Ihedswa I A Tepfx Adkow HUBHÖHE 4,7 m & 5 m ARMLÄNGE 3,2 m 2 STÜCK

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded Iodpfxevf E Avo Adkshw - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Leto izdelave: 1992, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: Div1, Technical data: 1x Demag KBK 1 column-mounted slewing jib crane, rated load 125 kg, with chain hoist Ihjdpfsng H T Ujx Adkow Load capacity at full outreach: 125 kg / 0.125 t Height: approx. 3.5 m Underside of jib: approx. 3 m Outreach: approx. 4 m Hook height: approx. 2.55 m Total weight: approx. 450 kg With steel or Demag chain hoist, 125 kg, depending on stock availability Including bolts, cable trolley, travel gear, end cap, etc. Various cranes in stock Slewing range: 300°, connection: 400 V, 16 A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Further cranes available with capacities from 80 kg to 5000 kg – please inquire See pictures Shipping by freight carrier or pickup by appointment only

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: DCMS, Leto izdelave: 2007, Demag manulift verižno dvigalo nosilnost: 125 kg višina dviga: 2,8 m vlečna razmerja: 1/1 hitrost dviganja: brezstopenjska 0,15 - 30 m/min Ihjdpfxeg Stp Ho Adksw izvedba: opremljeno z obešalnim očesom rabljeno v zelo dobrem stanju (v celoti pregledano) (nova cena € 3353,-) Na voljo več DCMS dvigal