Stroj za zavezovanje trakov

Cyklob XZE-3111- GL 2020 pallet conveyin

Leto izdelave: 2001, stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Available: 2 units! Condition must be inspected. Gjdpfxsvday Hs Afwsub It is possible to purchase the order pickers with a set of brand new batteries (2-year warranty) for €3,500, or for €3,000 with used batteries. Year of manufacture: 2017 Load capacity: 215 kg Lift height: 3,000 mm Travel speed: 8 km/h Overall length: 1,528 mm Battery voltage: 24V Model: EKM-202 Negotiable for larger quantities, significant discounts available! The agile and versatile EKM order picker is ideal for in-store applications, light maintenance tasks, or order picking without pallets. A sturdy mast allows lifting items up to the third rack level – making it an excellent alternative to conventional ladders. Automatically closing doors ensure operator safety, even at greater lift heights. A sensor mat on the floor increases mobility within the operator cabin, allowing free choice of position on the standing platform. The generously designed working area ensures maximum comfort for the operator while driving and working side-on. Excellent forward visibility is guaranteed. Ergonomically positioned controls permit simultaneous lifting and steering, making operation of the EKM highly efficient.

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Na voljo je linija za proizvodnjo tlakovcev proizvajalca Omag, ki je bila nenehno optimizirana in posodabljana na najnovejšo tehnično raven. Izvedeni remonti: 1) Predelava za dodatno hidravlično enoto za dodatno obremenitev leta 2020. 2) Predelava na servo vibracijo s krmilnikom Siemens S7 leta 2016. 3) Prehod na digitalno merjenje poti oblike in stiskalnice leta 2017. 4) Novi voz za polnitev jedra leta 2017. Sestavni deli naprave: 1) Razlagalnik in zlagalnik plošč, vključno z valjčno progo. 2) Vlečna enota za plošče (potisk) in linija za plošče (izravnalnik) do dvižnega ogrodja. 3) Obratnik plošč. 4) Horizontalna in vertikalna naprav za vezanje palet Ridder & Signode, letnik 1994 in 1983. 5) Premična dvigalka transformatorske postaje z motorji, brez krmilnika, letnik 1983. 6) Doppler z vključenimi hidravličnimi enotami, letnik 2004. 7) Pakirni stroj za kamen Omag K1400 z hidravlično enoto, letnik 1997. Naprava nima podlog za plošče. 8) Stroj za izdelavo tlakovcev Omag S22 140-90, letnik 2001. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Guodow R Uziepfx Afwob

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application Gjdpfx Aefu Ivzofwsub • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: rabljeno, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1845 mm Table Length / Clamping Length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot spacing: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t Gsdpfx Ajbn Amfjfwjub

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: Gujdpfx Afsvf E Avewsb The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Leto izdelave: 2011, stanje: dober (rabljeno), Offer 24370 Technical Specifications: - JUNGHANS sludge filter press with hydraulic cylinder unit + discharge conveyor - Flocculation system - Pumps Gedpfx Ast Srkpefwsub - Control cabinet with electrical installation - Water collection tray made of aluminum, integrated into the entire container floor - Lighting - 4-door sea container - Required floor space: approx. W 6.0 x H 2.4 x D 2.4 m - Weight: approx. 5,000 kg - Separate conveyor belt, length 8.0 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Godsrx Rxtspfx Afweub Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, 1 used CONCRETE BATCHING PLANT In EXCELLENT condition! Manufacturer: EUROMECC Model: EURO 5 MIX Year of manufacture: 2019 Gujdpfoxn A Nbsx Afwjb Rated output: approx. 60–75 m³/h Total production to date: 95,000 m³ Aggregate storage in high-silo / inline silo Capacity: 5 aggregate bins, each 45 m³ Inline silo feed via charging conveyor belt Truck loading (hopper volume 25 m³) PLANT COMPLETE with WINTER ENCLOSURE Mixer: 1 planetary mixer with agitator 1 x EUROMECC MEP 3000/2000 Dosing: Aggregates: weighing belt (4 load cells, 5,000 kg) Water: 1 water scale (500 kg) Admixture dosing: 1 admixture scale, 2 x 12 l Cement: 1 cement scale (1,000 kg) Cement silos: 6 units 2 x 150 m³ (D = 4.6 m) 1 x 90 m³ (D = 3.5 m) 1 x 45 m³ (D = 3.5 m) Control container/operator station included Control system: ElettronData Options: – Hot air heating in container – Admixture storage in container – Residual concrete recycling plant The plant is in very good and fully operational condition! AVAILABLE IMMEDIATELY Location: Denmark Price: on request Offer is strictly net ex works Subject to prior sale, errors and/or misrepresentation excepted, no guarantee and/or warranty, sold as seen, lying and/or standing Any reproduction, further use, publication and/or copying of this offer is strictly prohibited!

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), A complete and automated OMAG paving stone production line is available. Components: 1) Pull plate for colormix in the face mix hopper. 2) Inline washing unit. 3) Dry side by Rekers. 4) Handling by Rekers. 5) Control system by Rekers. 6) Fork carriage by Rekers. 7) Part of the drying chamber racks, as they serve as load-bearing structures for the building. 8) Board crane for buffer loading and empty boards. 9) Horizontal strapping system by Cyklop. Without plank conveyor and boards. Concrete supply: 2-axis skip, capacity with 90x90 paving stones: 1000-1100 per shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Complete new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible. Gsdpfxsv Nn Hxe Afwoub