Vakuumsko termooblikovanje / globoko vlečenje

GEISS T7

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Stroj DU 1500 x 1000 x 620 T7 št. 98 15254 Velikost plošče: 1000 x 800 mm, globina vleka: 620 mm Leto izdelave: 1998 Nazivni tok: 238 A Skupna priključna moč: 164,5 kW Upravljanje: Siemens OP 37 Oprema: • Podajalni stroj • 6 hladilnih ventilatorjev • Zgornji štančnik • Nadzor obesa folije • Nastavljiv napenjalni okvir z motornim pogonom • Bliskovni sevalnik • Pirometer za ogrevanje • Pirometer za hlajenje Ncjdpfxsxmgvce Abbjl

Stanje: rabljeno, Sweeping width: 800 mm Container volume: 114 l Total power requirement: 3.0 kW Practical area coverage: 2,759 m²/h Maximum area coverage: 5,232 m²/h Sweeping machine - scrubber dryer Nsdpjg Ti Ihefx Abbecl Operating hours: approx. 400 h Incl. 4 brushes + charger Incl. new battery pack (consisting of 6 gel batteries) !!

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Na voljo je velikoformatni vakuumski termotiskalnik Geiss. Ogrevalna moč: 180 kW, površina za oblikovanje X/Y: 1600 mm/1000 mm, globina vlečenja: 620 mm, hitrovpenjalni sistem: 640 mm, nastavitev okenskih plošč: 250 mm-750 mm, vrtalna mreža: 50 mm, zapiralna sila: 50 kN. Dokumentacija na voljo. Ogled na lokaciji je možen. Predvidoma na voljo od februarja 2026. Njdpfxsxwyvks Abbocl

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 80 kg, skupna širina: 990 mm, skupna višina: 870 mm, skupna dolžina: 1.180 mm, višina zlaganja: 800 mm, kapaciteta rezervoarja: 900 l, lastna masa: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking containers, storage bins, made of galvanized sheet steel. Manufacturer unknown Ncedpjvtckmofx Abbjl Dimensions of the stacking container (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal height of the box: 700 mm Box capacity: approx. 0.9 m³ Weight: approx. 80 kg each Note: The steel stacking containers were previously used on construction sites by the former owner as containers for sorted construction waste. Emptying into larger transfer bins/containers was carried out using a forklift with rotating forks. For this reason, the stacking containers were manufactured with extra heavy-duty walls. Sale is subject to change without notice and is made to commercial customers only, excluding any warranty or guarantee. We would be pleased if the steel stacking containers are of interest to you. Your Service Team Mertens & Frowein GmbH

Stanje: skoraj kot novo (rabljeno), Rotary vane vacuum pump in oil bath. Available in stock. Pump fully overhauled. Comes with warranty. Nominal flow rate: 300 m³/h Ultimate vacuum: 0.1 mbar abs. Nedpfx Aboftzzgebjcl For any questions, please contact us.

Leto izdelave: 2007, Stanje: dober (rabljeno), številka stroja/vozila: 1380-1207, - s krmilno ploščo Siemens Sinumerik - z odvodnikom odrezkov Nsdpfx Ajm Nb Riobbocl - krmilna plošča - električna omarica - prehodna kapaciteta vretena 60 mm - maksimalna dolžina obdelovanca 340 mm

Stanje: rabljeno, Leto izdelave: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length 200 – 640 mm Ncedpfx Aevp Sd Iebbjl Control system: PLC Siemens S5 95 U Total power requirement: 25 kW Machine weight: approx. 5 t Space requirement: approx. 8.5 x 2.8 x 2.35 m Hydraulic cutoff and double-end processing machine suitable for pre-machining of trapezoidal thread spindles as well as other round workpieces by cutting to length from bar and double-ended machining such as chamfering, facing, and drilling, with the workpiece fixed and rotating tools. Machine includes: - Base machine model TR 60/4-650, workpiece length 640 mm - Bar magazine for bar length 2 – 3.5 m - Standard version for solid material up to 40 mm diameter - Central positioning of bar feed rollers - Bar feeder unit - Standard version feed gripper - Rotary indexing table with 4 clamping stations, model TR 300.00 - 4 pcs. base jaws, width 80/140 mm, diameter 75 mm - Rotary indexing table swivels in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized saw head positioning - Automatic saw stand positioning with hydraulic clamping - Saw blade guide - Processing unit No. 1 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Processing unit No. 2 – USP.00/M – UF - Speeds 360/720 rpm, kW 1.8/2.8 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left-hand threads - Processing unit No. 3 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Processing unit No. 4 – USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid advance 40 mm - Spindle mount ISA 40/M 16 - Discharge chute - Metric scales for all adjustment movements - Hydraulic unit with SAUER SUNDSTRAND booster pump - Accumulator - Rexroth flow control valves for processing units and saw - Coolant system with filter and tank - CALPERA coolant pump - Electrical installation in separate switch cabinet. Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine lamp - Flashing light for signaling machine stoppage - Central lubrication - Chip conveyor In 2011, the machine underwent an extensive mechanical overhaul to optimize positioning and centering accuracy (€25,000). Additionally, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly run in recent years; the total operating hours are estimated by the owner at approx. 24,000. This is a used machine; therefore, we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Stanje: rabljeno, Avtomatska linija za prašno lakiranje Njdpfx Aev Npa Hebbecl Linija deluje s transportnim sistemom. Material, ki ga je treba prašno lakirati, se obesi na linijo in sistem nato samodejno sledi spodnjim korakom ter po čiščenju prašno premaže material. Izdelan je najprimernejši projekt za obstoječi obrat. Posebno oblikovanje se izdela glede na izdelek in potrebe naročnika.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil drip mats. No packaging table included—only briquette guides (rails). Supplied as standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreen panels. 2nd generation available for purchase from February 2024. For this press, please contact us first! Technical specifications: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 litres Filters: 4 Length: 2000 mm Width: 2000 mm Height: 2200 mm Weight: 3500 kg Briquette size: 40-110, D80 mm Warranty: 2 years / 2,000 operating hours Nedpfx Abjtmugcjbocl

Stanje: rabljeno, Leto izdelave: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm Njdpfx Abolqac Sebecl The system was originally supplied for the following workpiece dimensions: Diameter 26 mm - 29 mm Length 65 mm - 66 mm By using interchangeable parts in the clamping device, handling, etc., diameters up to approx. Ø50 mm should be feasible. An overall length of nearly 400 mm should be possible with some modifications. This also depends on tool lengths, machining lengths on the component, etc.