Ogrevan rezervoar za shranjevanje olja

GEA CFS OLT 1500

Stanje: rabljeno, Regoplas RT50 termo-olaj hőmérsékletszabályozó egység, termo-olaj 300°C-ig Itsdpjdmn E Hefx Ah Uen

Stanje: rabljeno, Leto izdelave: 1971, Pressure: 200 t Clear width: N/A mm Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between uprights: 420 mm Total power requirement: 18 kW Machine weight approx.: t Space requirement approx.: m Itodpfx Ast Hw Dwsh Usn E X N E R Hydraulic four-column press for embossing, coining, backward extrusion, calibrating, and punching (medals) Type: H4SP 200 # 1101-20 Year of manufacture: 1971, but has been overhauled several times since then _____ Press force downward: approx. 200 t Return force upward: approx. 20 t Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns (front): 420 mm Side distance: 220 mm Die height (table to ram, top): 380 mm Ram stroke: approx. 200 mm Piston/column diameter: 270/120 mm Piston bore: 50 mm Closing speed (ram): — Rapid traverse/load traverse/ram down: 330/10/180 mm/sec Total power requirement: approx. 15 kW — 380 V — 50 Hz Weight: approx. 3,000 kg Machine dimensions (L x W x H): approx. 1.4 x 1.3 x 2.75 m Accessories / Special Equipment - Hydraulic ejector in table with separate pressure regulation - Electric selector switch for continuous stroke/foot release/manual engagement/setup - Large pressure gauge and control lamps to indicate pressure achieved/depth achieved - Press stroke and rapid traverse are set via a switching linkage with limit switches on either side of the press piston - Pressure is controlled via a fine-adjustment pressure valve - Reversal from pressing stroke to return stroke via pressure switch or limit cam - Control cabinet and hydraulic unit, all compactly attached and easily accessible - Previously equipped with automation, but only various pneumatic lines and valves remain

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Heating capacity: 1100 kW, Heat transfer medium: thermal oil, Oil type: Maroltherm LH, Max. supply temperature: 300°C, Permissible operating temperature: 300°C, Permissible operating pressure: 10 bar, Flow rate: 51 m³/h, Max. flue gas temperature: 400°C, Flow monitoring (differential pressure): 0.1 bar – 0.36 bar, Cold start flow rate: 0.1 bar, Fill volume: 1,500 l. Documentation available. On-site inspection is possible. Itodpfjwtg Hdjx Ah Ujn

Leto izdelave: 1999, stanje: dober (rabljeno), Edgebanding Machine IMA Compact MFA / F / 5212 Year of manufacture: 1999 Serial No.: 06601 Maximum edge thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Adjustment of jointing fence: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic roll magazine: Yes Shear cut up to: 0.2 - 3.0 mm Solid edge magazine: Yes Panel preheating by radiant heater automatic gluing with granulate glue pot Cut-off saw angle adjustment via program Itsdpoia Naqofx Ah Uon Multifunctional unit Round-off unit/corner copying with 2 motors Profile scraper Flat scraper Buffing unit Aggregate display via mechanical number display Control via operator panel Operation via selector switch/buttons Protective hood Weight approx. 2500 kg Dimensions (L x W x H): 6500 x 1000 x 1600 mm CE marked Technical data subject to change

Stanje: skoraj kot novo (rabljeno), Rokovalna oprema za linijo spajanja s prsti. Valjčni transporterji, širokopasovni in ozkopasovni trakasti transporterji, transporter za obrezovalno žago, obrezovalne žage itd. Glejte slike. Priložena dokumentacija. Ijdpfsd Duz Eex Ah Uotn V dobrem stanju, proizvajalec Martek, Finska.

Stanje: dober (rabljeno), Leto izdelave: 2016, moč: 18 kW (24,47 KM), Single Advanced Oil D2-180-18-0 – Naprava za temperiranje olja Proizvajalec: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Leto izdelave: 2016 Ogrevalna moč: 18 kW Specifična ogrevalna moč: 23,2 kVA Nazivni tok: 32 A Napajalna napetost: 3×400 V / N / PE Frekvenca: 50 Hz Itjdpfeyrncisx Ah Uen Maks. temperatura: 180 °C Maks. delovni tlak: 3,1 bar Varnostni ventil: 6,0 bar Medij: toplotno olje Maks. zunanja količina: 22 litrov Lastna teža: 169 kg Dimenzije naprave: standardna izvedba (glede na tip naprave) Uporaba: regulacija temperature za industrijske procese, orodja, modularne enote Lokacija: Schierling

Stanje: rabljeno, Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, skupna masa: 4.000 kg, Pressure 40 t Stroke 150 mm Serial number 100091 Units in stock 2 Iodevxltbepfx Ah Ustn Pressure & stroke adjustable Pressure 25 t Weight per unit 1.5 t Safety light barriers: yes, on both units

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 2004, Thermal Oil Heating System AURA Itodpfx Aow Hxgvoh Uen Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Fluid: Thermal oil (Diphyl) Category: III Two units available, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Leto izdelave: 2013, stanje: skoraj kot novo (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 130365 bis 130368, Grejalne naprave so bile prevzete skupaj s stroji v okviru posla z družbo VW/Dieffenbacher in niso več potrebne. Predvideva se, da so bile uporabljene zelo malo časa (prejšnja uporaba v laboratoriju). Cena na napravo = 9.000 €, cena za celoten paket = 30.000 €. Ijdpjx An Eqefx Ah Uotn

Stanje: dober (rabljeno), Aggregate construction kit, formatting unit, machining unit, milling unit, contour milling unit, jointing milling unit, crosscut saw unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors Iodpfx Ahevyz Ahe Ustn -Milling units: swiveling -Motors: 2 x Perske DVMS 903/2 -Power: 0.4 kW -Frequency: 200 Hz -Speed: 12,000 rpm -Quantity: 1x milling unit available -Dimensions: 480/380/H590 mm -Weight: 69 kg