Namizni vrtalni mlin

FRORIEP 70000x1300mm

x-axis / mm
y-axis / mm
z-axis / mm
The boring mill is sold without clamping plates –
the price refers exclusively to the boring mill.

Technical Data

Horizontal Milling and Boring Machine with Support Sleeve

Working Range

Vertical adjustment of the spindle head
from the clamping surface: 0 - 3000 mm
Horizontal travel of the column: 7000 mm
Maximum drilling depth with boring spindle only: 1200 mm
Maximum drilling depth with boring spindle and support sleeve combined: 1300 mm
Boring spindle diameter: 150 mm
Milling spindle diameter: 240 mm
Support sleeve diameter: 390 mm
Extension stroke of the support sleeve: 700 mm
Boring spindle tool holder: ISO 50
Maximum workpiece weight: 70,000 kg
When placed on 4 prisms: 95,000 kg

Main Drive

Total speed range, adjustable from: 2 - 795 rpm
Range 1: 2 - 50.4 rpm
Range 2: 50.4 - 126 rpm
Range 3: 126 - 314 rpm
Range 4: 314 - 795 rpm

Rated drive power at nominal speed 17.5: 80 kW

Rapid traverse speed of spindle head and column: 1800 mm/min

Rapid traverse speed of boring spindle and support sleeve: 1400 mm/min

Fine feed speed of spindle head and column:
medium: 75 mm/min
fine: 3 mm/min

Fine feed speed of boring spindle and support sleeve:
medium: 57.7 mm/min
fine: 2.5 mm/min

Feed of spindle head and column for milling:
Range 1: 3 - 75 mm/min
Range 2: 72 - 1800 mm/min

Feed of boring spindle for drilling:
Range 1: 0.19 - 4.7 mm/min
Range 2: 2.2 - 56 mm/min
Range 3: 56 - 1400 mm/min

Special Equipment

Digital length measuring system in horizontal and vertical direction
Accuracy 0.01 mm

Rotary and traversable clamping table by Collet & Engelhard, Offenbach
Model Tdvmf 1.6 (Technical data see “Clamping Table”)

Rotary and traversable clamping table by Scharmann, Rheydt
Model DAV 1600

Rotary and traversable clamping table by Froriep, Rheydt

Slewing crane for tool change, maximum load 500 kg

Special Tools

Tungsten carbide core drill bits for extracting core samples

Universal facing and boring head by Wohlhaupter, Frickenhausen
Model UPA7, with the following data:

1 division on fine adjustment: 0.01 mm in diameter
1 revolution of the fine adjustment: 0.5 mm in diameter
Pjdpjxdnraofx Agpegw
Facing and boring range: 0 - 1250 mm
Maximum carriage adjustment: 210 mm

Automatic carriage feeds in mm/rev during facing:
0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 -

Rapid adjustment per revolution of the
dial spindle: 6 mm in diameter

Largest diameter of the carriage at zero position corresponds to the smallest
drilling diameter of 323 mm

Head height without shank: 260 mm

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.