Ogrevalni sistem

Froling TURBOMAT 500

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood Bjdpfx Aew Sy T Hjfnjld System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Bljdpfx Ajihpn Njfnjd Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Leto izdelave: 2013, Stanje: zelo dobro (rabljeno), Gas burner Weishaupt WM-G10/3-A We have 8 units in stock. Capacity: 630 kW – 1200 kW 2x Year: 2007 WMG10/3-A 2x Year: 2010 WMG10/3-A 1x Year: 2011 WMG10/2-A 1x Year: 2011 WMG10/4-A 1x Year: 2009 WMG10/3-A 1x Year: 2013 WMG10/3-A We speak Russian! Inspection by prior telephone arrangement only! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee. Subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We are happy to purchase your used boiler or burner! Blsdei Atp Sepfx Afnsd Of course, we also handle all the necessary formalities. Loading possible.

Stanje: rabljeno, 100 m³ Buffer Storage Tank, horizontal, in frame rack Volume: 100,000 l Dimensions (LxWxH): 15,400 mm x 3,500 mm x 3,500 mm Insulation: 100 mm mineral wool, all around Wall construction: insulated walls, painted RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: Bljdjtv Rp Hopfx Afnsd - 1 x manhole for maintenance access - 1 x connection nozzle (flow and return, boiler) - 1 x connection nozzle (flow and return, consumer) - 2 x temperature sensors PT 100

Leto izdelave: 1992, Stanje: zelo dobro (rabljeno), Gas burner Weishaupt WM-G50/2A version ZM Capacity: 600–5,200 kW Year of manufacture: 1992 Including Dungs DN50 gas train. Bledpfxohl In Rj Afnjd We speak Russian! Viewing only by prior telephone arrangement! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors. We are happy to purchase your used boiler or burner! Of course, we can handle all formalities. Loading possible.

Stanje: rabljeno, Popolnoma sestavljena in delujoča linija za proizvodnjo peletov s kapaciteto do 3 ton na uro je naprodaj. Tovarna je zelo malo rabljena – proizvedla je le 16.000 ton in je v zelo dobrem tehničnem ter vizualnem stanju. Idealno za profesionalno proizvodnjo peletov iz lesne biomase, agrobio mase ali drugih surovin. Za montažo obrata niso potrebni dodatni prostori, saj je peletirni stiskalnica že vgrajena v kontejner. Linija vključuje: - Stiskalnico in mlin Salmatec Maxima 700 – zanesljiva nemška kakovost z visoko učinkovitostjo in dolgo življenjsko dobo. - Transportna in dozirna oprema Rematec – robustna in natančna dobava materiala v vseh fazah. - Šotorsko pokritje. - Dodatna oprema: cikloni, sita, hladilnik, kontrolna plošča itd. Na voljo so vsi DWG načrti in risbe za temelje opreme. Bledpfx Aex S Egmsfnod Glavne prednosti: - Velika proizvodna zmogljivost – do 3 t/h. - Komponente visoke kakovosti evropskih proizvajalcev. - Možnost prilagoditve za različne vrste surovin. - Linija je v obratovalnem stanju – možen je prikaz delovanja. - Takoj dobavljivo.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, moč: 160 kW (217,54 KM), vhodna napetost: 380 V, trajanje garancije: 12 meseci, leto zadnje generalne obnove: 2023, Oprema: dokumentacija / priročnik, 1 Pellet press, brand: Buhler DPAB Inner die diameter: 660 mm Die running surface: 138 mm The press is equipped with a 160 kW motor. Press door is made of stainless steel and fitted with an overload relief valve. 2-roller press with 2 rollers, refurbished in a dimpled or corrugated version. Press is complete with die lifting device and tools. The press has been fully overhauled and fitted with new bearings and wear parts, such as front and rear scrapers, die clamp ring, etc. Also includes new V-belts. Bsdpfx Aforah Evjnold All safety measures will be observed and appropriate switches will be fitted: Friction protection, door switch, and inspection hatch switches will be installed.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, as new condition * Laser power: 5 kW * Wavelength: 1030 nm Bodpsqfguasfx Afnold * Beam quality: 4 mm mrad * Beam switch with 4 LLK outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D * Optional fieldbus interface and IIO3 card available * 2 units available

Leto izdelave: 1988, Stanje: dober (rabljeno), številka stroja/vozila: 14684/1, suitable for recycling copper cables and plastics Bjdpjnvdq Nsfx Afnjld

Stanje: dober (rabljeno), Leto izdelave: 2008, Skupna masa: 3.500 kg Masa prikolice: 866 kg Blsdpfxohqd Sio Afned tip prikolice: triosna Prikolica je skoraj nerabljena. Uporabljena je bila le nekajkrat za manjše dostave.