Stroj za termooblikovanje
FRIMO FullFlex Thermoformanlage FTL80/200DT

Name: FRIMO FullFlex Thermoformanlage FTL80/200DT
Brand: FRIMO FullFlex Thermoformanlage
Availability: InStock

Leto izdelave

2014

Stanje

Rabljeno

Lokacija

Freilassing Nemčija

Stroj za termooblikovanje FRIMO FullFlex Thermoformanlage FTL80/200DT

FRIMO FullFlex Thermoformanlage FTL80/200DT

Prikaži karto

Podatki o stroju

Opis stroja:: Stroj za termooblikovanje

Proizvajalec:: FRIMO FullFlex Thermoformanlage

Model:: FTL80/200DT

Serijska številka:: F.24442.03.03

Leto izdelave:: 2014

Stanje:: rabljeno

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Freilassing, Nemčija

najem:: je mogoče

Klic

Podrobnosti ponudbe

ID ponudbe:: A19271566

Št. reference:: Z.24442.95.0001

Nazadnje posodobljeno:: dne 06.08.2025

Opis

Unique opportunity for serial manufacturers

We are offering you an immediately available, top-tier thermoforming linear system with automatic tool change, rotary table, heavy-duty lower table with spindle drive, tool change station, maintenance platform, hot melt extraction, heating enclosure, and many other special features, directly from the manufacturer FRIMO.

The system was most recently used for producing automotive door panels. The film itself was coated with hot melt adhesive. However, the system can also be used for dispersion adhesives (adhesive applied to carrier parts).
Very large components are possible, with a forming area of up to 800 x 2,000 mm.
The maximum forming height is 250 mm.
Very fast cycle times of under 60 seconds are easily achievable.

The system was regularly maintained and was operational until it was dismantled.

Bodpfswpd Rrjx Afnswi
Currently, the system is professionally stored at our facility in Hungary.
We have locations worldwide and can provide direct on-site support at your plant.

We can deliver this system worldwide as required, install it at your facility, train your staff, and assist you with all technical questions.

Any type of modification or modernization is also possible.

Contact us with your individual project requirements!

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2025

1 Oglas na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 8654 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Termoformirni stroj tipa GN Thermoforming machine GN Type TQA-520/580

București

890 km

Termoformirni stroj tipa GN
Thermoforming machine GN TypeTQA-520/580

44.800 €

EXW Stalna cena brez DDV

Klic

Stanje: novo, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 25 h, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, skupna višina: 1.500 mm, skupna dolžina: 5.200 mm, skupna širina: 2.350 mm, skupna masa: 2.500 kg, dolžina tračnega lista: 520 mm, širina tračne žage: 580 mm, Nova stroj. Bodjunia Hepfx Afnswi

Poglej podrobnosti

Mali oglas

Kovinski nosilec za kotliček iz pločevine 500 mm SAS RAZ-ENK 500

Podplat

45 km

Kovinski nosilec za kotliček iz pločevine 500 mm
SASRAZ-ENK 500

1.430 €

Stalna cena brez DDV

Klic

Mali oglas

Stroj za vakuumsko termooblikovanje Geiss T8 DU

Nemčija

650 km

Stroj za vakuumsko termooblikovanje
GeissT8 DU

Klic

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), A large-format vacuum thermoforming machine by Geiss is available. Sheet cutting dimensions (min.): 1100mm/1300mm, (max.): 2100mm/1800mm, maximum forming depth: 620mm. Additional sheet format 1: min. 850mm/750mm, max. 1850mm/1250mm. Additional sheet format 2: min. 1050mm/800mm, max. 2050mm/1300mm. Included is a separate feeding unit with pneumatic sheet separation equipment, an automatic alignment device for sheet blanks in both longitudinal and transverse direction, a pneumatic pusher for removing formed parts from the feeding unit, fully automatic central lubrication for the feeding machine, several exchange pallets for window sheet sets, a storage rack for window sheets, a vacuum control system with four independently adjustable flow stages, and an air treatment system. Documentation is available. On-site inspection is possible. Bodpfx Aewih Arofnewi

Poglej podrobnosti

Mali oglas

Samodejno stojalo za izsekovalno stiskalnico BEUTLER NOVA C 1000

Plettenberg

768 km

Samodejno stojalo za izsekovalno stiskalnico
BEUTLERNOVA C 1000

Klic

Leto izdelave: 2003, Stanje: rabljeno, Pressure: 100 t Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Bwedpfx Afora Rr Eonoi Ram adjustment: 100 mm Table area: 950 x 660 mm Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Poglej podrobnosti

Mali oglas

Ekscentrični pritisk - enojni stolpec SCHULER PDr C63-315

Plettenberg

768 km

Ekscentrični pritisk - enojni stolpec
SCHULERPDr C63-315

Klic

Leto izdelave: 2002, Stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Bodpfslp U D Tsx Afnswi Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Poglej podrobnosti

Mali oglas

Gräfenthal

556 km

Enostranski odkalilnik
BBTABH 2000

Klic

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Bsdpog U Utvjfx Afnowi Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Poglej podrobnosti

Mali oglas

Ennepetal

801 km

Ekscentrični tisk
BetzEZL 300

Klic

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Tlačna sila: 300 ton Dimenzije mize: 1.200 x 850 mm Prostornina: 400 mm Širina bata: 1.100 mm Odprtina v mizi: 400 x 250 mm Vgradna višina: 500 mm Število hodov: 32 1/min Bedpfx Ajd A Hbcsfnswi Hod: 30 - 140 mm Nastavitev bata: 105 mm Teža: pribl. 19.500 kg Ostalo - Dovoljeno za ročno polaganje delov - Opremljeno z varnostnim ventilom Herion Xsz 20 - Motorizirano centralno mazanje z mastjo - Pnevmatski batni cilindri za kompenzacijo teže - Motorizirano nastavljanje bata - T-utorji v batu - Samostoječa upravljalna konzola - Ležaji ojnic obnovljeni Zaščitni pokrovi za predkolo so seveda vključeni – glejte drugo fotografijo.

Poglej podrobnosti

Mali oglas

Ekscentrični stiskalnici - en stolpec Schuler CR 80-345

Schmölln

563 km

Ekscentrični stiskalnici - en stolpec
SchulerCR 80-345

Klic

Leto izdelave: 1980, Stanje: rabljeno, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table size: 875 x 695 mm Ram area: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30–90 spm Bwsdsdlcy Hspfx Afnoi Gap between uprights: 450 mm Machine weight approx.: 6.2 t Space requirement approx.: 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top): 480 mm Further information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Free-standing control cabinet with touchscreen incl. cabling * New paint finish of individual components when dismantled After the partial overhaul, the machine is safe for manual loading operation at open tooling; prior to delivery, a current UVV safety inspection and brake time measurement will be performed.

Poglej podrobnosti

Mali oglas

Vodni rezalnik FLOW 6030-Waterjet 2003 FLOW 6030-Waterjet

Wijchen

922 km

Vodni rezalnik FLOW 6030-Waterjet 2003
FLOW6030-Waterjet

Klic

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 4.428 h, Cena: Na zahtevo - Leto izdelave: 2003 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat na voljo: Ne - Delovne ure: 4428 - Krmiljenje: CNC - Znamka krmilnega sistema: Siemens - Moč [kW]: 37,0 - Obratovalni tlak [bar]: 4137 - Premik X-osi [mm]: 6500 - Premik Y-osi [mm]: 3300 Finančne informacije DDV: Navajena cena je brez DDV DDV/Obdavčitev po razliki: DDV je odbiten za podjetja Dostava in odkup so možni kadar koli za vse industrijske naprave Bwodpfownidhox Afnoi Lukas van Rossum

Poglej podrobnosti

Mali oglas