FORMAT4 HVP Tip 4

FORMAT4 HVP Typ 4

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Gluing system: EVA Joint milling: yes Ledpfx Ael Txw Hjhuorn Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: zelo dobro (rabljeno), Kot nova naprava za mehko in trdo vezane knjige! Možnost uporabe PUR in EVA lepil! Proizvodna hitrost: 1–3 knjige na minuto Min./maks. debelina vezave: 0,1–45 mm Maks. dolžina vezave: do 455 mm Min./maks. višina vezave: 140 mm / 320 mm Maks. debelina mehke platnice: do 400 g/m2 Napetost (V) / Frekvenca (Hz): 220–240 / 50–60 Maks. tok: 3,8 A Dimenzije stroja (Š x D x V): 107 x 60 x 64 cm Teža: 90 kg Standardna oprema: set orodij za trdo in mehko vezavo Lrjdpfx Ahovnzx Eoujn Na voljo tudi stroj za izdelavo platnic (casemaker)

Stanje: dober (rabljeno), Koda: 0322 Znamka: SCM Model: L'INVINCIBILE SI 3 – CE standard Elektronska formatna žaga z upravljano osjo, nagibnim rezilom in podrezovalno enoto, namenjena za pohištvo, obdelavo plošč, izdelavo pohištva po meri, vrata, lesena okenska okvirja, kuhinje, kopalniško pohištvo, plastiko, kompozitne materiale in različno drugo – CE standard – leto 2017 Tehnični podatki: - Voziček v celoti iz aluminija s kontaktnim drsnim sistemom po kaljenih in brušenih jeklenih vodilih - Elektronska upravljalna enota EASY TOUCH 12: 12-palčni barvni ravni zaslon – Neposredno upravljanje naslednjih osi z ročnim, ročnim inkrementalnim, polavtomatskim in avtomatskim načinom: dvig glavnega rezila, nagib rezilne enote, premik paralelnega vodila, dvig in pomik podrezovalnega rezila. Pomoč operaterju z grafično podporo. Baza podatkov orodij - Pomožna funkcija za operaterja na elektronskem upravljalniku - Stensko nastavljiva upravljalna plošča - Podrezovalna enota z lastnim motorjem - Dolžina formatnega vozička: 3800 mm - Premer glavnega rezila: 400 mm - Premer podrezovalnega rezila: 120 mm - Nagib rezila: 0-45 stopinj - Maksimalna višina reza pri 90°: 140 mm - Maksimalna višina reza pri 45°: 97 mm - Hitrost vrtenja rezila: 3000/4000/5000 min⁻¹ - Hitrost vrtenja podrezovalnega rezila: 8500 min⁻¹ - Moč motorja glavnega rezila: 9,5 KM - Moč motorja podrezovalnega rezila: 1,7 KM - Širina reza do paralelnega vodila: 1500 mm - Programirani paralelni vod s THK vodenjem - Elektronska nastavitev podrezovalne enote - Pravokotni okvir s sistemom ‘COMPEX’ za poševne reze z avtomatsko kompenzacijo položaja prislona - Start/stop tipke integrirane v vozičku - Ekscentrična roka za vpenjanje obdelovanca - Podaljšek delovne površine - Pravokotno vodilo s 3 LCD prikazovalniki za položaje prislona - Popolna podpora in brezžična povezava: nastavljiv okvir za poševne reze s popolno brezžično funkcijo - Premer odsesovalne cevi: spodaj 120 mm, na zgornjem zaščitnem pokrovu 100 mm Lodsytufgspfx Ahusrn - Skupne mere sestavljenega stroja: 4200 × 4300 × 1800 mm (V x Š x G) - Mere za transport: 4200 × 2350 × 1800 mm + paleta 1600 × 1000 × 800 mm - Masa: 1140 kg

Stanje: rabljeno, Rabljeni stroj Oprema in tehnični podatki: - Površina stiskanja: 2.200 × 1.100 mm - Število cilindrov: 4 - Največji pritisk stiskanja: 60 ton - Izvedba: 1 etaža - Grelne plošče: zlato eloksirane energijsko varčne plošče ELKOM - Odprtina: 350 mm - Priključna moč: 14 kW - Premer bata: 80 mm - Delovni tlak: 365 atü Mere: 2.600 mm × 1.250 mm × 1.750 mm Lrjdpfxewpm I He Ahusn Dobavljivost: takoj Lokacija: Röllbach

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer Ljdpfxox D H Hcs Ahuorn • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a rotary magazine table with a diameter of 750 mm for edge material from 0.4–3 mm, a GlueBox application unit, as well as top and bottom polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15" SmartTouch display and a multifunctional milling unit for precise processing of plastic edges. Contact us for more information on this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Top and bottom polishing unit Machine advantages Technical machine benefits • Height adjustment for positioning of workpieces: 8–60 mm Ljdpfx Ahex D Hbtouorn • Rotary magazine diameter: 750 mm for edge material 0.4–3 mm in rolls • Rotary magazine for edge material with ball bearings, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 HP), 12,000 rpm, HW saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°–10° • Top and bottom multifunctional milling units // top and bottom profile sanding machine x-motion plus, for processing plastic edges of 2 and 3 mm • Motorized corner rounding unit with 2 motors, electronic adjustment for milling the front and rear edge profiles of the top/bottom edge for edge thickness of 0.4–3 mm and feed speeds up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW • Edge and workpiece thickness measurement with Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Control system: x-motion Plus control with 15" SmartTouch

Stanje: novo, HIGH PERFORMANCE – BUILT FOR THE PROCESSING OF SINGLE, DOUBLE, AND HEAVY-DUTY BOARD! Main Features: - 40+ pre-installed FEFCO styles, 100+ available box designs - One-pass operation for seamless carton production - Supports single wall, double wall, and high-strength board Lrsdpfx Ahowrrfceuon - Processes sheet and zig-zag (Leporello) board - Integrated die-cutting system - Fast tool changeover – less than 20 seconds - Fully automatic servo drive setup - Large 19" touchscreen HMI with intuitive software - Slotting, creasing, cutting, gluing, and printing in a single pass - Removable feeder (compatible with manual or vacuum feeding) - Remote diagnostics and updates via integrated VPN connection _____ Optional Features and Upgrades: - Gluing system – synchronized cold glue applicator unit - miniFLEXO – compact single-color flexo printer - Flexomat – full-format flexo printer - Vacuum feeding system – compensates for board curvature - 3D scanner – automatic product scanning and data input - Automatic carton folding system - Fully automatic production line _____ Technical Data: - Power supply: 3 x 380/415/480 V - Installed power: 8.5 kW - Production efficiency: Up to 500 cartons per hour - Maximum carton size: 2400 mm (94") width x 9999 mm (394") length - Minimum carton size: 250 mm (10") width x 750 mm (30") - Slot width: ~7–8 mm (~5/16") - Machine footprint (L x W x H): ~3600 x 1900 x 1750 mm - Machine weight: ~3800 kg (7900 lbs) For further information, please contact us – we are happy to assist you.

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with run-out function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece processing sequence, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free positions for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit chip removal: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Ledpfsw I U Drox Ahuern Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraper unit with blow-off device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with run-out function - Surcharge for diamond tooling, height = 65 mm for jointing unit - Riepe spray device (anti-stick) at jointing unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° bend + manual gate valve mounted on the machine, D=200mm Availability: short notice Location: Hochheim

Stanje: rabljeno, številka stroja/vozila: 007848, Type of applied edging: thin edge, thick edge, solid wood Lodpfewkrqpex Ahujrn Adhesive system: EVA, hot air Joint trimming: yes Multifunctional unit: yes Max. feed speed: 20 m/min Maximum panel thickness: 60 mm Processing units: 8 pcs

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: BM5008, BM5008 Manual operation Ledpjh S Drgsfx Ahujrn Hot-melt spine gluing Book spine milling station for books up to max H440 x W280 x D40 mm