Pretočni obdelovalni center

FORMAT 4 PROFIT H20

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 33.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, višina obdelovanca (maks.): 60 mm, delovna višina: 950 mm, model krmilnika: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width with workpiece thickness of 22 mm: 55 mm Minimum working width with workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strips max.: 0.4 - 20 mm Edge cross-section, strips max.: 900 mm² Edging material, roll: 0.3 - 3 mm Maximum edge cross-section for PVC: 135 mm² Maximum edge cross-section for veneer: 100 mm² Maximum roll diameter: 830 mm MACHINE DETAILS Control: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine base for mounting processing units Workpiece support with roller rail, extendable by approx. 800 mm Glue roller drive when feed is stopped Glue pot lifting mechanism when feed is stopped Workpiece-actuated glue pot clamping Automatically adjustable infeed fence Pneumatically controlled infeed guard Feed unit with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data acquisition Electric height adjustment Fixed stop side on the left Workpiece transport device Top pressure Separating agent spraying unit Jointing cutter unit, 2 x 3 kW Glue application unit A20 Basic for roll material up to 3 mm and strip material up to 20 mm, with melt unit, granulate container and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Lubricant spraying unit Pre-milling unit 1.5 kW, pneumatically adjustable Contouring milling unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with infinitely variable axis Multi trimming unit MN21, automatic Nkjdpfsyc Sr Aox Abbst Finishing unit FA11, with trimming unit, cleaning agent application and buffing unit, pneumatically adjustable Noise protection Space for additional processing units Note: The machine is sold without working tools. Container loading and sea packaging are not possible by the seller.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, skupna dolžina: 7.755 mm, višina obdelovanca (maks.): 40 mm, delovna višina: 950 mm, model krmilnika: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece projection: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Nkjdpfx Aeyc S Haobbst Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Scissor-type workpiece support with roller support, extendable by 1000 mm Automatic infeed fence adjustment Fixed stop on the left side Pneumatically controlled infeed lock Upper pressure by powered combination V-belt Electric height adjustment Workpiece transport system via transport chain with rubber pads Release agent spray unit (top/bottom) Joint milling unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-change system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight as well as pneumatic adjustment for flush/overhanging trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhanging milling Contour milling unit FK11 with automatic adjustment from bevel to radius milling Profile scraper PN10 (with pneumatic retraction for lateral offset) Finishing unit (with pneumatic retraction for lateral offset), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, dolžina rezanja (maks.): 4.200 mm, premer žaginega lista: 320 mm, največja širina rezanja: 3.500 mm, skupna masa: 4.800 kg, Oprema: dozator, TEHNIČNE PODROBNOSTI Območje rezanja: 4.200 x 3.500 mm Previs žaginega lista: 80 mm Premer žaginega lista: 300-320 mm Premer predrezovalnega žaginega lista: 150 mm Podajanje žagine košare naprej: 5-100 m/min Podajanje žagine košare nazaj: 130 m/min Podajanje potiskača materiala naprej: 25 m/min Podajanje potiskača materiala nazaj: 80 m/min PODROBNOSTI STROJA Moč motorja: 9 kW Njdpfoyc Sggjx Abbjkt Moč motorja predrezovalke: 1,2 kW Dimenzije & teža Teža: cca 4.800 kg OPREMA Tiskalnik etiket Krmilna plošča na levi strani 4 zračne blazine mize AV licenčni ključ za optimizacijo Ardis Opomba: Prodajalec ne omogoča nakladanja v kontejner ali ladijskega pakiranja.