Karavan z visoko streho

FORD E-TRANSIT L3H3 317km WLTP68kWh

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 150 km, moč: 198 kW (269,20 KM), prva registracija: 06/2025, vrsta goriva: električni, velikost pnevmatike: 235/65R16, konfiguracija osi: 4x2, medosna razdalja: 3.750 mm, gorivo: elektrika, barva: rumena, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 6.100 mm, skupna širina: 2.050 mm, skupna višina: 2.800 mm, dolžina tovornega prostora: 3.480 mm, širina tovornega prostora: 1.810 mm, višina nakladalnega prostora: 190 mm, Leto izdelave: 2025, Oprema: ABS, Apple CarPlay, Bluetooth, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, spojka prikolice, tempomat, = Additional Options and Accessories = - Heated mirrors - Electric - Halogen lamp - None - Radio/cassette - Rear-view camera - Synthetic leather (Skai) - Lane departure warning system - Blind spot sensor = Notes = Configuration: 4x2, Payload: 907 kg, Unladen weight: 2,593 kg, Gross weight: 3,500 kg, Unbraked trailer load: 750 kg, Center axle braked trailer load: 750 kg, Trailer hitch, Cabin type: single cab, Cruise control, Air conditioning, Number of airbags: 6, Rear wiper, Parking assistance: front and rear, Electric windows, Electric mirrors, Radio/cassette, CarPlay, GPS navigation, Color: yellow, Metallic, Heated mirrors, Rear-view camera, Lighting type: halogen lamp, Speed limiter, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine output: 198 kW (266 HP), Fuel type: electric, Transmission type: automatic, Speed limiter, Power steering, ABS, ASR, Starter battery, Body type: high roof, extended, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seats: 2, Seat configuration: 1+1, Seat upholstery: synthetic leather (Skai), Seat adjustment: electric, L3H3 electric! towbar ac automatic carplay navigation new no BPM, Tire type: all-season tires = Further Information = General Information Number of doors: 1 Registration number: V-24-LVR Axle Configuration Tire size: 235/65R16 Brakes: disc brakes Axle 1: suspension: coil spring Axle 2: suspension: leaf spring Weights Unladen weight: 2,593 kg Payload: 907 kg GVW: 3,500 kg Functional Nledpjw Ibxpjfx Agxea Load floor height: 85 cm Maintenance APK (Roadworthiness inspection): valid until 06.2029 Condition Technical condition: very good Optical condition: very good Damages: none Number of keys: 2 Financial Information Lease price: €513 (excl. BPM) per month (panel van, 72 months); Please inquire for more information and conditions

Stanje: novo, Leto izdelave: 2025, Yanigav Earth Auger TAMD245 • Easy three-point hitch • Very robust, welded, machine-manufactured chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable augers from 10 cm to 80 cm diameter and up to 1.80 m height • Offset of 1.30 m on each side of the axis • Chassis with a length of 245 cm • Auger not included Nlsdpor Ezniofx Agxoa

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 168 km, moč: 198 kW (269,20 KM), prva registracija: 06/2025, vrsta goriva: električni, velikost pnevmatike: 235/65R16, konfiguracija osi: 4x2, medosna razdalja: 3.750 mm, gorivo: elektrika, barva: rumena, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 7.100 mm, skupna širina: 2.050 mm, skupna višina: 2.800 mm, dolžina tovornega prostora: 3.430 mm, širina tovornega prostora: 1.820 mm, višina nakladalnega prostora: 1.990 mm, Leto izdelave: 2025, Oprema: ABS, Apple CarPlay, Bluetooth, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, spojka prikolice, tempomat, = Additional options and equipment = - Heated mirrors - Electric - Halogen lamp - None - Radio/cassette - Reversing camera - Skai (synthetic leather upholstery) - Lane keep assist - Blind spot sensor = Notes = Configuration: 4x2, Payload: 907 kg, Kerb weight: 2593 kg, Gross weight: 3500 kg, Unbraked trailer load: 750 kg, Mid-axle braked trailer load: 750 kg, Tow bar, Cabin type: single cab, Cruise control, Air conditioning, Number of airbags: 6, Parking assistance: front and rear, Electric windows, Electric mirrors, Radio/cassette, CarPlay, GPS navigation, Colour: yellow, metallic, Heated mirrors, Rear view camera, Lighting type: halogen lamp, Speed limiter, Lane keep assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 198 kW (266 hp), Fuel type: electric, Transmission: automatic, Speed limiter, Power steering, ABS, ASR (traction control), Starter battery, Body type: high roof, extended chassis, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seats: 2, Seating arrangement: 1+1, Seat covering: Skai, Electrically adjustable seats, L3H3 electric! Tow bar, AC, automatic, CarPlay, navigation, new, no BPM, Spare wheel, Spare wheel tread: 4%, Tyre type: summer tyres = Further information = General Information Number of doors: 1 Registration: V-24-LVL Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Axle 1: Left tyre tread: 8 mm; Right tyre tread: 8 mm; Suspension: coil spring Axle 2: Left tyre tread: 8 mm; Right tyre tread: 8 mm; Suspension: leaf spring Weights Unladen weight: 2,593 kg Payload: 907 kg gross vehicle weight: 3,500 kg Functional Loading surface height: 85 cm Nlodpfow Ivdysx Agxoa Maintenance APK (roadworthiness inspection): valid until 06.2029 Condition Technical condition: very good Visual condition: very good Damages: none Number of keys: 2 Financial information Lease price: €530 (excl. BPM) per month (van, 72 months); Ask for more information and conditions

Stanje: novo, Leto izdelave: 2025, Folding machine ZGR-1400/2.0 without rotary shear Maximum working length: 1400 mm Maximum sheet steel thickness: 2.0 mm Bending beam: 24 mm Weight: approx. 190 kg (manual machine) Nljdpfx Asb H Afdegxoa Upper beam can be lifted in three positions Maximum clear opening between beams: 80 mm Bending angle: 145° Delivery: €180 Rotary shear available at extra charge: €350 We look forward to your inquiry!

Stanje: novo, Leto izdelave: 2026, The CORMAK WS20 bench drill is a professional column drill for metal, specifically designed for drilling and tapping operations in industrial environments. With its robust construction, large spindle travel, and automatic tapping function, this machine delivers excellent performance and precision when machining metals, especially structural steel. Key features of the machine: - Tapping function with automatic left-hand rotation engagement – enables fast and safe tapping up to M16 in steel. - High structural rigidity – 85 mm diameter column and precision-machined, seasoned cast iron components (spindle head, base, and table) provide stability and vibration damping. - 135 mm spindle travel – allows for deep drilling without the need to reposition the workpiece. - Belt drive – five precisely selected spindle speeds ranging from 280–1875 rpm. - Guards with limit switches – compliant with CE standards, enhancing operator safety. - Large worktable with 360° rotation and T-slots – flexibility for fixture mounting. Design and technology: The CORMAK WS20 metalworking bench drill is built using high-quality materials. The spindle and transmission shafts are made from hardened steel for wear resistance. The spindle head, column, and table are manufactured from precisely machined and seasoned castings, ensuring overall rigidity. The Morse taper MK2 spindle allows for quick tool changeover and the use of various cutting tools. Precision and performance: Thanks to the stable column, large spindle stroke, and refined transmission, the machine ensures precise and repeatable hole drilling and tapping. The ergonomic control panel facilitates operation, while the powerful 1.1 kW motor enables efficient work even with difficult-to-machine materials. Application: The CORMAK WS20 column drilling machine is ideally suited for use in: - industrial plants, Njderif Tropfx Agxjla - mechanical workshops, - maintenance departments, - technical schools and training centers. The machine is intended for drilling and tapping in steel, aluminum, and non-ferrous materials. Standard equipment: - Keyed drill chuck - Taper knockout wedge - U-type spindle guard with safety switch - Belt guard with limit switch Technical data: | Parameter | Value | |-----|----- | | Maximum drilling diameter (steel) | 20 mm | | Maximum tapping diameter (steel) | M16 | | Spindle travel | 135 mm | | Spindle taper | MK2 | | Spindle speed range | 280 – 1875 rpm | | Number of speeds | 5 | | Column diameter | 85 mm | | Column wall thickness | 12.7 mm | | Distance spindle–column | 260 mm | | Distance spindle–table | 366 mm | | Distance spindle–base | 678 mm | | Table size | 300 × 320 mm | | Base size | 376 × 566 mm | | Motor power | 1.1 kW | | Power supply | 400 V | | Net weight | 179 kg | | Machine dimensions | 800 × 450 × 1250 mm|

Stanje: dober (rabljeno), Leto izdelave: 2003, 5X units of handling devices Geiger Model: EA-Mini 2001 SLI Year: 2001 Nledpfx Agslwqrhsxea

Stanje: dober (rabljeno), Kovaško nakovalo s podstavkom -DxŠxV: 1000x350x360 mm (mere nakovala) -Teža cca 300 kg Nodpfxox N Ew Tj Agxola Pridržujemo si pravico do napak in vnosnih napak.

Stanje: novo, Leto izdelave: 2026, Powerful band saw equipped with a swiveling arm adjustable from -45° to +60°, portable quick-lock vise, blade tension gauge (tensometer), and hydraulically lowered arm with smooth adjustment. Additionally fitted with an ergonomically designed control panel to ensure safety and operating comfort. Maximum cutting width is 490 mm. Key features of the band saw: - Blade tensioning wheel fitted with a dial gauge tensometer to indicate correct blade tension for optimal results and blade longevity. - Robust, torsion-resistant saw frame made of cast iron. The drive wheels inside are high quality, and the saw blade is mounted on them. - Ergonomic control panel with clearly marked buttons: main switch, start/stop, coolant, and band speed (slow/fast). Includes emergency stop in compliance with the latest EU safety standards. - Hydraulic actuator control mounted on the panel column allows precise adjustment of the arm descent speed and easy activation/deactivation. - Stable drive system with high-quality, hardened and ground gears. The powerful motor is proportionally matched to the material sizes. Nlsdpfx Aov R Tgtegxea - Secure blade guidance via bearing-mounted guides, width-adjustable according to the workpiece. - Equipped with end switch for automatic shut-off after arm descent. - Solid vise holds workpieces securely; includes a stop for repeated cuts. - Reinforced hydraulic actuator allows precise speed control of arm descent via potentiometer. Saw arm swivels from -45° to +60°, with adjustable lift force via spring. - Integrated, efficient coolant system located in the saw base. - Quick clamping of workpieces in the vise. The vise is adjustable to both sides, allowing angled cuts. - Includes coolant tray with pump. - Heavy-duty cast iron saw body ensures stability during the cutting process. - Saw arm can be locked in position. - Rigid base enables working height of approximately 95 cm (standard with the machine). Additional advantages of the band saw: Other features include two-step band speed adjustment (35/70 m/min), quick-release vise, swiveling saw arm from -45° to +60° with scale display, high-value machine offering excellent quality-to-price ratio, solid construction for precise, quiet, low-vibration operation, steplessly adjustable hydraulic arm descent, durable carbide roller guides, reinforced bronze worm gear transmission, automatic limit switch, and standard liquid cooling system. Technical data: - Working height: 870 mm - Cutting speed: 35/70 m/min - Band saw blade dimensions: 3770 x 34 x 1.1 mm - Blade width: 34 mm - Coolant pump power: 0.1 kW - Total power: 2.8 kW - Voltage: 400V - Dimensions (W x D x H): 2200 x 1400 x 1500 mm - Weight: 630 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Modernizované: 2026 Numerično krmiljenje: HEIDENHAIN TNC-i530 Tehnične lastnosti Dimenzije Dimenzije mize: 2000 x 900 mm Število T-utorov: 5 Dimenzije T-utorov: 22 mm Hodi osi Hod osi X: 2000 mm Nodpjyf Rryofx Agxsla Hod osi Y: 1000 mm Hod osi Z: 1000 mm Rezkalna glava Tip glave: Ročna rezkalna glava (U22) Sistem vpenjanja orodja: Hidravlični Stožec vretenskega nosu: ISO 50 (DIN 69871) / Izvlečni vijak: DIN 69872 Območje vrtljajev: 3000 vrt/min Moč vretena: 22 kW Podajalne hitrosti Hitri pomik (X / Y-Z): 20000 / 12000 mm/min Teža in dimenzije Maksimalna obremenitev mize: 3500 kg Približna teža stroja: 14000 kg Približne dimenzije stroja: 6367 x 5070 x 2803 mm Oprema Zaščita: 2 drsni vrat in nova obodna zaščitna mreža Nožni pedal: nov nožni pedal za vpenjanje orodij Hlajenje: zunanje Elektronsko ročno kolo: novo HR-510 Prodajni pogoji Garancija: 6 mesecev za mehanske dele Cena in prodajni pogoji: po dogovoru Prikaži vse tehnične podatke

Stanje: novo, Leto izdelave: 2026, DT1500M Grinding Table – Professional Metalworking Station The DT1500M grinding table is a modern solution designed for intensive metalworking and industrial applications that require effective extraction of dust and fumes. Equipped with two independent fans and a highly efficient filtration system, this grinding table ensures a high level of workplace safety and environmental protection. It is an ideal solution for industrial plants, mechanical workshops, paint shops, and metalworking facilities. Key Advantages - Dual filtration system – effectively captures over 99.9% of dust particles, protecting both the operator and the environment. - High ventilation capacity – two radial fans with a combined airflow of 8,000 m³/h. - Eleven segmented worktop sections – provide working comfort and facilitate easy filter cleaning. - Bottom and side ventilation – efficient extraction of contaminates from various working zones. - Metal drawers on both sides – enable easy removal of grinding waste. - Heat-resistant filters – ensure durability even in demanding conditions. Construction and Technology The DT1500M grinding table features a robust, welded steel construction resistant to vibration and mechanical damage. The built-in dual extraction units and double filtration system ensure quiet and reliable operation, while the modular segmented worktop design allows for easy part installation and maintenance. Precision and Efficiency Fitted with high-performance radial fans and precise filtration systems, the DT1500M provides continuous and safe operation even during heavy-duty grinding of metal parts. The use of noise-damping elements and a well-engineered airflow design make this grinding table not only effective but also ergonomic. Nsdpfew Hcrpsx Agxsla Applications The DT1500M is suitable for any environment requiring the removal of harmful metal particles and dust – from metalworking shops and paint booths to assembly lines and industrial plants using grinding tables for daily finishing tasks. Standard Equipment - Dual air filtration system - Two radial fans (left and right sides) - Metal waste drawers - Segmented worktop - Ventilation system with bottom and side extraction Technical Specifications Worktop dimensions: 1530 x 510 mm Motor power: 2 x 0.75 kW Airflow capacity: 2 x 4,000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Voltage: 230 V Weight: 102 kg Dimensions: 1560 x 560 x 850 mm