Brusilna miza za kovine

CORMAK DT1500M

Stanje: generalkompletno obnovljen (rabljeno), Druck: 150 t Ffedpfogd H Tpex Abvow Hubweg: 140 mm Tischgröße: 510 x 530 mm

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: Fsdpfx Ajrkgy Uebvjfw - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request.

Stanje: zelo dobro (rabljeno), Ansemi parallel lathe, model Mono FAP 325 ES, center distance 1500 mm, center height 325 mm, spindle bore 65 mm, motor power 18 kW, overall dimensions (mm): 3300x1200x1700 h, weight 3260 kg Fedpjwcd Hmofx Abvjfw

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery Ffedpod Du T Ijfx Abvsw • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails Fodpfx Abopiarnovjfw System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: novo, Delivery pressure: 11 bar Suction capacity: 480 cm³ Volumetric flow rate: 360 (unit missing – please specify, e.g., l/min) Tank capacity: 270 l / bar Number of cylinders: 1 pc. Motor: 400 Volt / 3.0 kW Fodpsvkizgsfx Abvofw Speed: 892 rpm Machine weight: approx. 200 kg Dimensions (L x W x H): 1.6 x 0.7 x 1.2 m

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Fjdpfod H Hhzox Abvjfw Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine For use without a power supply (e.g. breakdown service vehicles or mobile tyre service) The compressor is used, built in 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you not only the usual advantages of RENNER systems but also, above all, flexibly available compressed air on construction sites, in service vehicles, and for many other applications "without a power socket". They guarantee a reliable compressed air supply independent of location. The small version is mobile and can be repositioned quickly thanks to the ergonomic handle, while the larger variant, with its compact design, can easily be moved with a pallet truck or forklift and loaded onto vehicles. VE = Electric Start. Please note: supplied without battery. Fjdjd H Dr Sepfx Abvefw Technical data: Intake capacity: 550 l/min Effective output: 400 l/min Petrol engine: 3.6 kW Honda unit with 4.8 HP Max. pressure: 10 bar Cylinders/stages: 2/1 Speed: 1,400 rpm Sound level: 98 dB(A) Air receiver: 50 l Dimensions (L x W x H): 810 x 460 x 830 mm Weight: 70 kg Visit our store in Erlangen. We have a large selection of new and used compressors.

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement Ffodjvu Hgbepfx Abvew - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: novo, Leto izdelave: 2025, Yanigav Earth Auger TAMD245 • Easy three-point hitch • Very robust, welded, machine-manufactured chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable augers from 10 cm to 80 cm diameter and up to 1.80 m height • Offset of 1.30 m on each side of the axis Fsdpfx Absr Eznijvefw • Chassis with a length of 245 cm • Auger not included