Stroj za žaganje z eno glavo

FOM INDUSTRIE PANDA 550 with ASSOMAK VS 7m

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 9518 202-5, Offer 24361 Technical Specifications: - 3 individually motor-driven rollers, manual and CNC-controlled operation - Max. torque per roller: 1600 Nm - Vertical stroke of bending roller (X-axis): approx. 265 mm - Lower rollers adjustable laterally: 200 – 1000 mm - Shaft diameter: 105 mm - Roller diameter: up to approx. 260 mm - Usable length of standard shafts: approx. 300 mm - Infinitely variable shaft rotation: 1 – 22 rpm - Bending capacity e.g.: - Round tube 1": Ø 350 mm - Round tube 4": Ø 2000 mm - Flat bar 300 x 15: Ø 600 mm - Roller drive: 400 V / 3 x 1.1 kW - Hydraulic drive: 400 V / 3 kW - Weight: approx. 1200 kg - Accessory weight: approx. ... kg - Required space approx.: W 1250 x H 1400 x D 1700 mm - Equipped with: - PC 100 control in separate console Bdodpfx Afot Nfv Tsqok - Side straightening rollers adjustable horizontally and vertically - Standard bending set for flat and angle steel - Roller sets for steel and plastic tubing

Leto izdelave: 2002, Stanje: dober (rabljeno), AXES TRAVEL X AXIS (longitudinal) (mm): 7,700 Y AXIS (transversal) (mm): 470 Z AXIS (vertical) (mm): 420 A AXIS (spindle rotation): 0° ÷ 180° ELECTROSPINDLE Maximum power in S1 (kW): 8 Maximum speed (rpm): 24,000 Tool holder taper: HSK - 63F Automatic tool clamping: ● Cooling with heat exchanger: ● ONBOARD AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine: 8 Maximum number of angular heads insertable in the tool magazine: 2 Maximum saw blade diameter storable in the magazine (mm): Ø = 180 FUNCTIONALITY Multi-piece operation: ● Dynamic pendulum operation: ● WORKABLE FACES With direct tool (top face, side faces): 3 With angular unit (side faces, end faces): 2 + 2 Bodpfx Aferupldeqodk With saw blade tool (top face, side faces, end faces): 1 + 2 + 2 TAPPING CAPACITY With compensator: M8 Rigid (optional): M10 WORKPIECE CLAMPING Standard number of clamps: 8 Maximum number of clamps: 12 Independent motorized clamps: ● Maximum number of clamps per zone: 6

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Bdedpfx Afsifk Rbjqok Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Leto izdelave: 2024, Stanje: novo, Machining Center Rumba - Processing length 3,000 mm / 4,000 mm CNC-controlled machining center with vertical machining spindle, suitable for processing extruded aluminum profiles, light metal, PVC, and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4kW electrospindle, 18,000 rpm, inverter controlled, and quick-change tool system (tool changer) with ISO30 spindle. Interpolation of X, Y, Z, and W axes, controlled by numerical control. Brushless motors for X, Y, Z, and W positioning. Complete with 4 pneumatic double clamps, tool diameter correction via software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified Windows-based graphics, Teamviewer for remote maintenance, special HICAM 2 / CAMPROX software for loading ISO files and running programs). Bjdpfjhywz Sex Afqjdk Capability to machine longer workpieces. Standard Equipment: 4kW electrospindle ISO30 4 pneumatic clamps (manually adjustable) Safety guard Automatic tool changer (10 tools) 4x ISO30 taper complete with tool 3x chip collection compartments Air nozzle Technical Data: X-axis travel 3,000 mm / 4,000 mm Y-axis travel 400 mm Z-axis travel 300 mm Rapid traverse (X, Y, Z): 50 m/min Acceleration (X, Y, Z): 1.5 m/s² Electrospindle: 4kW ISO30 / 6.6kW HSK63 (optional) Spindle cooling: air-cooled Max. tool length: 130 mm Max. tool diameter: 140 mm (saw blade) Operating pressure: 7 bar Weight: 2,500 kg You are welcome to inspect the desired system at any time in our production/showroom. Please feel free to contact us about this. Plantec Maschinen GmbH

Stanje: generalkompletno obnovljen (rabljeno), Portalrichtpresse Druckkraft: 450 t Hub: 50 mm Lichte Weite: 1000 mm Arbeitsbereich: Bjdpfx Aefcnu Iefqjdk Länge: 5.200 mm Breite: 2.300 mm Höhe: 1.000 mm Gewicht: 45.000 kg Schraubenabstand links-rechts: 1.000 mm

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Mitre saw with a 600 mm saw blade diameter (optional 800 mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (clamping cylinder height and tilt angle steplessly adjustable) - Two-hand safety control Bjdpfxsd Rhzwo Afqsdk Options available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Sawing machine version - Preloading magazine - Horizontal clamping device - Extraction system - Further accessories on request We would be pleased to provide you with a tailored quotation according to your requirements. The machine can be inspected and tested in 56812.

Stanje: novo, Leto izdelave: 2024, Mitre saw with a saw blade diameter of 600mm (optionally 800mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are continuously adjustable) - Two-hand safety control Optional available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Version as fully automatic saw - Pre-loading magazine - Horizontal clamping device - Extraction system - Additional accessories on request Bdjdpfx Afsd Rhzijqek We will be happy to provide you with a customised offer tailored to your requirements. The machine can be inspected and tested at 56812.

Stanje: novo, Leto izdelave: 2025, Quick mitre adjustment from 30° to 150° steplessly with 0.5° accuracy according to scale. The mitre pivot point is at the intersection of the saw blade and the material stop, ensuring no change in the length dimension. End stops at 30° + 45° left and 30° + 45° right. Manual material clamping. In every frame angle position, the material is clamped parallel at 90°. Cutting pressure reduction is achieved by the dead weight of the heavy, torsion-resistant saw frame, with fine adjustment according to material cross-section via a hydraulic damping cylinder. Standard with coolant system, which can optionally be supplemented by a micro-dosing unit. Machine base with chip collection tray. Bjdpsbi S Diofx Afqedk Saw blade drive with end shut-off. Precision saw blade carbide roller guides. Paint finish in silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw blade mounted on the machine 4/6 TPI Operating manual and spare parts list on CD-ROM. Optional equipment: Hydraulic lifting of the saw frame Version Manual Mitre capacity: 30° left ø 130 mm; square 120x120 mm 45° left ø 200 mm; square 180x180 mm 90° ø 260 mm; square 300x260 mm 45° right ø 200 mm; square 180x180 mm 30° right ø 130 mm; square 120x120 mm Motor: [kW] 1.8 Saw blade: [mm] 3350x27x0.9 Saw blade speed: 35/75 m/min Working height: [mm] 900

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Spindle speed range - main spindle: max. 4,000 rpm Drive power - main spindle: 35 / 45 kW Maximum torque: 770 Nm Bjdpfx Aevzhiwofqjdk Spindle head: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range - driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec Y axis: 120 (+/- 60) mm X axis: 300 mm Z axis: 1,300 mm Y axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MT 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tooling - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 1.395 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040877,  4-axis (X, Y, Z, A) machining centre,  Designed for economical and efficient processing of aluminium profiles and thin-walled steel profiles,  Version with air-cooled milling spindle,  All machining operations such as milling, drilling, and tapping are carried out on the stationary profile,  Smooth machining using all tools,  Synchronous tool magazine ensures short tool change times, resulting in optimal machining cycles,  Magazine can be equipped with eight tools,  Windows operating system,  Machine equipped with eluCam software,  Max. machining field length with front-face processing: 4200 mm  Max. machining field length without front-face processing: 4320 mm  Automatic length measurement on both sides,  Barcode scanner,  Stationary tool magazine (8 slots), Bodpfx Afjuc U S Njqedk