Stebrni vrtalnik

FLOTT SB P30 ST (NEU ab Werk)

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 80 kg, skupna širina: 990 mm, skupna višina: 870 mm, skupna dolžina: 1.180 mm, višina zlaganja: 800 mm, kapaciteta rezervoarja: 900 l, lastna masa: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking containers, storage bins, made of galvanized sheet steel. Manufacturer unknown Dimensions of the stacking container (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal height of the box: 700 mm Box capacity: approx. 0.9 m³ Weight: approx. 80 kg each Note: The steel stacking containers were previously used on construction sites by the former owner as containers for sorted construction waste. Emptying into larger transfer bins/containers was carried out using a forklift with rotating forks. For this reason, the stacking containers were manufactured with extra heavy-duty walls. Sale is subject to change without notice and is made to commercial customers only, excluding any warranty or guarantee. Bljdpfxjvtckme Afned We would be pleased if the steel stacking containers are of interest to you. Your Service Team Mertens & Frowein GmbH

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, 5 kW air-cooled chiller for outdoor installation with axial fans. Standard configuration includes a P3 pump. Technical data available upon request. The unit is available in stock at our Güglingen warehouse. Bljdpfx Aefqlllsfnod We are happy to provide free and professional advice for your application. We constantly have a changing selection of chillers in various sizes available from stock, both as demo units, new, and occasionally used. We also accept chillers in part exchange or purchase them outright.

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Blodpjrah S Hefx Afned Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: novo, Leto izdelave: 2026, Spindle speed continuously variable, electronically controlled: 40–4000 rpm Spindle mount: MT 2 Table height adjustment via rack and pinion Maximum thread cutting capacity: M10 Thread cutting depth setting via digital depth display Bljdpoby Swhofx Afned Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/operation: manual Table height adjustment via rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with base) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300 / 360 mm Motor: single-phase AC with frequency inverter, 230 V, 0.54 kW OPTION: Drilling package no. 2: - Vice "Felix", jaw width 80 mm, max clamping width 120 mm - Quick-release drill chuck 1–13 mm, mount B16 - Taper arbor MT II/B16 - Reducing sleeve MT II/MT I Price: €320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN INDIVIDUAL QUOTATION!

Stanje: novo, Leto izdelave: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roll Shaft diameter: 40 mm Roll diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Blodpfx Afehgiuhensd Manual adjustment, 3-roll drive, etc.

Stanje: rabljeno, Leto izdelave: 1979, Swing diameter over bed: 480 mm Bledpfedmbrxsx Afnod Swing diameter over cross slide: 200 mm Turning length: 650 mm Maximum swing diameter over bed cover: 200 mm Centre distance: 750 mm Spindle head: Size 6 Spindle bore: 58 mm Total power requirement: 18 kW Machine weight approx.: 2.7 t Space requirement approx.: 2.70 x 1.58 x 1.68 m CNC path control, 2 axes, SINUMERIK 5T with thread cutting, tailstock quill taper Morse 4, maximum quill stroke 200 mm, tailstock travel 550 mm Control cabinet 80 x 40 x 230 cm Weight: 150 kg Motor control cabinet with Siemens 810T, dimensions W/D/H 80 x 90 x 100 cm, weight: 200 kg 4x plates + Spax screws + sheet metal screws Drilling machine, drill bits

Stanje: novo, Leto izdelave: 2025, Press brake bending machine by Prod-Masz with side cut-outs for top-to-bottom bending. With this, you can finish your window sills. The machine design provides a 6 cm space up and down for bending operations. This is a modern sheet metal bending machine that allows bending from three sides. RED PLUS 2200/0.8 Press Brake incl. foot operation and transport rollers + CUT-OUTS Technical data: - Maximum working width: 2200 mm - Bending capacity: up to 0.8 mm (steel sheet) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 145 degrees - Rolling shear cutting across the entire working width - Bending beam thickness: 15 mm - Upper beam can be raised in three positions - Upper beam stroke: 80 mm - Degree scale - Angle stop - Rear frame for holding sheets - Front depth stops - Weight: approx. 230 kg The rolling shear (max. cutting capacity 0.8 mm / steel) for an additional 350 euros Blsdpfx Ajcntm Aefned The machine conforms to CE regulations and comes with a 12-month warranty. Shipping costs: 180.00 euros to Germany Transport rollers included Cash payment on delivery! We look forward to hearing from you!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 288 kg Special workbench systems from the SST, SFT and SWT series (fixed series) serve as 3D clamping workstations for the efficient production of assemblies, welded structures, and bonded constructions, e.g. jigs, railings, frames, etc. With the help of the extensive range of clamping accessories (see welding table accessories catalog section), these table systems can also be used as flexibly configurable fixtures, thus enabling the high-quality production of small and medium series. The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. In addition, the table top is marked with a 100 x 100 mm grid for easy alignment of workpieces or fixtures. The table perforation allows for the use of various clamping elements and positioning aids. For special applications, the table top surface can, as an option to the standard, also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This ensures long-term sustainability of the table system. Bljdpfx Asgrvwfjfned Price must be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Dimensions (LxWxH): 1480 x 980 x 65 to 105 mm Bjdofk Ah Rspfx Afnjld Width: 980 mm Length: 1480 mm Approx. weight: 371 kg Welding and assembly tables of the SMT flex series are robust, height-adjustable, everyday workstations designed for handling heavy workpieces, operating electric tools, or working with chemical or oily substances. The tables can be easily moved using transport rods in the base rails with a pallet truck, and the height can be quickly adjusted to match other work levels. The height adjustment ranges from 650 mm to 1,050 mm (lower working heights available on request). The solid steel worktop, up to 20 mm thick, withstands heavy impacts or blows, such as those often occurring when using heavy hand tools or handling very heavy metal workpieces or tools, without causing permanent deformation or notching. The metallic work surface allows unrestricted use of magnetic clamps for fixing components. Due to its high own weight, this universally applicable table provides excellent stability and safety against tipping over, even when supporting heavy items or tools in its highest position. For accessories and further information, please follow this link:

Stanje: novo, Leto izdelave: 2025, Thread cutting device OLED display LED lighting Continuous/Normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum thread cutting capacity: - R1 M30x3.5 - R2 M24x3 Spindle taper MK IV Drilling depth (mm): 160 Throat (mm): 300 Column diameter (mm): 140 Usable table surface (W x D) (mm): 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment via rack and pinion Spindle/table distance (mm): 150-700 Machine dimensions without base (mm): 610 x 900 x 1,980 with base (mm): 670 x 1,100 x 2,200 Motor 3-phase 400V with frequency inverter (kW): 4.0 Infinitely variable spindle speeds R1 (single stage): 0-1000 rpm R2 (single stage): 0-1600 rpm Manual feed Weight (kg): 400 Optional drilling package 6 (€ 890.00 plus VAT): - Vice [Felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II Bodpfx Afjd Su Agjnjld - Reducing sleeve MK IV/MK III - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery throughout Germany including packaging! DIDN'T FIND THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – CONTACT US FOR AN OFFER! FLOTT AUTHORIZED DEALER