Polpriklopnik z nizko nakladalno ploščadjo

Fliegl SDS 390, 3x VORHANDEN!

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: arriving / in transit, 3 axles, air suspension, last axle self-steering, ABS (anti-lock braking system), lashing rings, side underrun protection, supports, storage box Superstructure: 3 units available! Total length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Isdpex Hkccofx Ah Aeik Lowbed length approx.: 9,600 mm Loaded bed height in lowbed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 1,150 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grained steel welded construction in reinforced design, fifth-wheel plate with replaceable 2" king pin, outer frame slightly angled with "Load-Lock profile" for lashing strap attachment, 8 additional pairs of lashing rings recessed in outer frame, each rated 5 t, 1x detachable compensation block on low-loader platform (3-piece), wooden crossbeams on top at least 200 mm wide for height compensation, gooseneck insertable in 3 positions with parking position at cranked section, 4 pairs of stake pockets 83 x 83 mm recessed in floor for inserting compensation block, storage compartment for detachable stakes open below loading platform, 13 pairs of stake pockets recessed into outer frame 70 x 40 mm internal dimension (3 pairs on gooseneck, 10 pairs on lowbed), 3 rows of stake pockets in floor, each with 7 stake pockets, 70 x 40 mm internal dimension, 26 removable stakes B=80/ D=50/ L=1200 mm, hot-dip galvanized, hardwood floor approx. 30 mm thick laid longitudinally with omega profiles for high point load capacity in wheel arch area of steel/chequer plate floor. All information subject to change, as the vehicle is still in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: inbound / in transit, 3 axles, air suspension, last axle steered, ABS (anti-lock braking system), lashing rings, underrun protection, support legs, storage box Body/structure: 3 units available! Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,488 mm Neck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Iiedpfx Ahox Hkcij Ask Loaded low-bed platform height approx.: 900 mm Internal width approx.: 2,480 mm Saddle height approx.: 1,150 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grain steel welded construction, reinforced design; fifth wheel plate with replaceable 2" king pin; slightly sloped external frame with "Load-Lock profile" for securing straps; 8 additional pairs of lashing rings recessed into the side frame (each 5 t); 1 plug-in equalizing support (3-part) on the low-bed platform; timber cross-beams on top, minimum 200 mm wide for height compensation; gooseneck adjustable in 3 positions with parking position at the cranked section; 4 pairs of 83 x 83 mm stake pockets recessed into the floor for plug-in equalizing support; open storage compartment below loading platform for plug-in stakes; 13 pairs of 70 x 40 mm stake pockets recessed into the outer frame (3 pairs on gooseneck, 10 pairs on low-bed surface); 3 rows of stake pockets recessed into the floor, each with 7 stake pockets, 70 x 40 mm internal size; 26 removable stakes, B=80/ D=50/ L=1200 mm, hot-dip galvanized; hardwood floor, approx. 30 mm thick, installed longitudinally with omega profiles for high point load capacity in the wheel arch area (steel/chequer plate floor). All information subject to change, as the vehicle is inbound! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, interim sale and errors!

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: inbound / in transit, 3 axles, air suspension, rear axle steering, ABS (Anti-lock Braking System), lashing rings, underrun protection, support legs, storage box Superstructure: 3 units available! Total length approx.: 13,800 mm Maximum overall width: 2,550 mm Total height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Iijdpfxjxz Hk As Ah Ask Low-bed length approx.: 9,600 mm Loaded bed height in low-bed section approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 1,150 mm Kingpin mounting distance approx.: 1,680 mm Front corner dimension approx.: 2,040 mm High-strength fine-grain steel welded construction, reinforced design, fifth wheel plate with replaceable 2" kingpin, slightly slanted external frame with "Load-Lock profile" for attaching lashing straps, 8 additional pairs of lashing rings integrated in outer frame, each rated at 5t, 1 detachable compensating block (3-piece) on the low-bed platform, timber crossbeam on top minimum 200 mm wide for gooseneck height compensation, insertable in 3 positions with parking position at the gooseneck drop, 4 pairs of stanchion pockets (83 x 83 mm) recessed into the floor for fitting the compensating block, open stowage compartment for insertable stanchions located underneath the loading platform, 13 pairs of stanchion pockets integrated into the outer frame (internal dimension 70 x 40 mm: 3 pairs on the gooseneck, 10 pairs on low-bed section), 3 rows of stanchion pockets recessed in the floor, 7 stanchion pockets per row (70 x 40 mm internal dimension), 26 insertable stanchions (W=80 mm, D=50 mm, L=1,200 mm), hot-dip galvanized, hardwood floor approx. 30 mm thick, longitudinally laid with Omega profiles for high point load capacity in wheel arch area, steel/chequer plate floor. All information provided without guarantee, as the vehicle is inbound! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!