Polpriklopnik z nizko nakladalno ploščadjo

Fliegl SDS 390, 3x VORHANDEN!

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: inbound / in transit, 3 axles, air suspension, rear axle steering, ABS (anti-lock braking system), lashing rings, underrun protection, landing legs, tool box Body: 3 units available! Total length approx.: 13,800 mm Maximum total width: 2,550 mm Total height approx.: 2,488 mm Neck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded platform height in low bed approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 1,150 mm Isdpfx Ahsx I I Apo Asik Kingpin mounting dimension approx.: 1,680 mm Front corner measurement approx.: 2,040 mm High-strength fine-grain steel welded construction, reinforced design, fifth wheel plate with replaceable 2” kingpin, outer frame slightly inclined with 'Load-Lock profile' for securing lashing straps, 8 additional pairs of lashing rings recessed in the outer frame each rated to 5 tons, 1x plug-in compensation block on the low bed platform (3-piece), wooden cross beams on top at least 200 mm wide for height compensation, gooseneck adjustable in 3 positions with parking position at the cranked section, 4 pairs of stake pockets 83 x 83 mm recessed into the floor for plugging in the compensation blocks, open storage compartment for insertable stakes under the loading platform, 13 pairs of stake pockets set into the outer frame with 70 x 40 mm internal dimensions (3 pairs on neck and 10 pairs in the low bed area), 3 rows of stake pockets recessed into the floor, each with 7 stake pockets, 70 x 40 mm internal dimensions, 26 removable stakes B=80/ D=50/ L=1200 mm, hot-dip galvanized, hardwood flooring approx. 30 mm thick, longitudinally laid with Omega profiles for high point load capacity in wheel arch area with steel/chequer plate floor. All specifications are subject to change, as the vehicle is inbound! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: inbound / in transit, 3 axles, air suspension, last axle steered, ABS (anti-lock braking system), lashing rings, underrun protection, support legs, storage box Body/structure: 3 units available! Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Isdpox Hkciofx Ah Aoik Overall height approx.: 2,488 mm Neck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loaded low-bed platform height approx.: 900 mm Internal width approx.: 2,480 mm Saddle height approx.: 1,150 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fine-grain steel welded construction, reinforced design; fifth wheel plate with replaceable 2" king pin; slightly sloped external frame with "Load-Lock profile" for securing straps; 8 additional pairs of lashing rings recessed into the side frame (each 5 t); 1 plug-in equalizing support (3-part) on the low-bed platform; timber cross-beams on top, minimum 200 mm wide for height compensation; gooseneck adjustable in 3 positions with parking position at the cranked section; 4 pairs of 83 x 83 mm stake pockets recessed into the floor for plug-in equalizing support; open storage compartment below loading platform for plug-in stakes; 13 pairs of 70 x 40 mm stake pockets recessed into the outer frame (3 pairs on gooseneck, 10 pairs on low-bed surface); 3 rows of stake pockets recessed into the floor, each with 7 stake pockets, 70 x 40 mm internal size; 26 removable stakes, B=80/ D=50/ L=1200 mm, hot-dip galvanized; hardwood floor, approx. 30 mm thick, installed longitudinally with omega profiles for high point load capacity in the wheel arch area (steel/chequer plate floor). All information subject to change, as the vehicle is inbound! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, interim sale and errors!

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2021, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: inbound / in transit, 3 axles, air suspension, rear axle steering, ABS (Anti-lock Braking System), lashing rings, underrun protection, support legs, storage box Superstructure: 3 units available! Total length approx.: 13,800 mm Maximum overall width: 2,550 mm Total height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loaded bed height in low-bed section approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 1,150 mm Kingpin mounting distance approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Iedpfjxz Hk Aex Ah Asik High-strength fine-grain steel welded construction, reinforced design, fifth wheel plate with replaceable 2" kingpin, slightly slanted external frame with "Load-Lock profile" for attaching lashing straps, 8 additional pairs of lashing rings integrated in outer frame, each rated at 5t, 1 detachable compensating block (3-piece) on the low-bed platform, timber crossbeam on top minimum 200 mm wide for gooseneck height compensation, insertable in 3 positions with parking position at the gooseneck drop, 4 pairs of stanchion pockets (83 x 83 mm) recessed into the floor for fitting the compensating block, open stowage compartment for insertable stanchions located underneath the loading platform, 13 pairs of stanchion pockets integrated into the outer frame (internal dimension 70 x 40 mm: 3 pairs on the gooseneck, 10 pairs on low-bed section), 3 rows of stanchion pockets recessed in the floor, 7 stanchion pockets per row (70 x 40 mm internal dimension), 26 insertable stanchions (W=80 mm, D=50 mm, L=1,200 mm), hot-dip galvanized, hardwood floor approx. 30 mm thick, longitudinally laid with Omega profiles for high point load capacity in wheel arch area, steel/chequer plate floor. All information provided without guarantee, as the vehicle is inbound! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!