CNC rezkalni stroj

FLEXICAM STEALTH

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.080 mm, pomik osi Y: 2.040 mm, pomik po osi Z: 200 mm, proizvajalec krmilnikov: FlexiCAM Advanced Control System, 3D arvutatud juhtimissüsteem. Tööpindala 4.080 x 2.040 mm. Kõigil telgedel võimsad suletud ahelaga servomootorid. Spindel automaatse tööriistavahetajaga (ATC). Maksimaalne võimsus 8 kW (S6), pöörlemiskiirus 2.000–24.000 p/min, tööriista hoidja ISO 30, ER 32 padrunid. Maks. tööriista läbimõõt 26 mm (ER-40). ATC süsteemis kuni 20 positsiooni. Tolmukoguja automaatsüsteemi tööriistavahetuse jaoks. Kõrgsurve vaakumlaud: 8 individuaalselt ventiiliga tsooni, fenoolist töölaud tihendite võrgu jaoks. Kuivkäigul kõrgsurve vaakumpump: 7,8 / 9 kW (10 / 12 hj), tootlikkus 250 m³/h / 147 cfm (50 Hz) või 300 m³/h / 177 cfm (60 Hz), tolmufilter, sisse-/väljalüliti, ülekoormuskaitse kaasas. Fgsdsw Ap Rwepfx Ah Djh

Leto izdelave: 2020, Stanje: kot nova (razstavni stroj), Machine Data • Traveling gantry with fixed table and moving portal for minimal footprint • Base, bridge, and bridge stands made of steel, fully welded in one piece, stress-relieved, and machined • Main machine assemblies consisting of rib-reinforced welded constructions, optimized for an ideal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using Finite Element Analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for simple loading and unloading via forklift or overhead crane • Ground precision linear guides with high preload and additional cover tape for optimal chip removal on all axes • Brushless, digital A/C servo motors and controllers on all axes • Double-sided, synchronized drive on the X-axis (gantry drive) • Rack-and-pinion drives on X and Y axes • Precision ball screw drives with dual support bearing units on Z-axis • Precision planetary gearboxes with minimal backlash • Fully enclosed cable drag chains for protecting trailing cables against chips and dust • High-quality shielded trailing cables offer high reliability against malfunctions and failures • X-axis working range: 2,550 mm • Y-axis working range: 1,550 mm • Z-axis clearance: 200 mm • Z-axis travel: 280 mm • Max. traversing speed: 80 m/min • Network connection via Ethernet • Remote maintenance via internet • Dimensions approx. 2,960 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Total weight approx. 3,200 kg CNC Control • Siemens Sinumerik 808D Advanced • Siemens Sinumerik Operate user interface • LCD color display • Mechanical buttons, protection class IP65 • Input via 62-key control panel • Technology-specific keyboard layout • Operating panel with 39 keys and 30 LEDs • LED tool number display • Rotary switches for feed and spindle speed • Handheld unit with handwheel, axis & resolution selection, emergency stop button • Front USB port (IP65) • Ethernet port (RJ45) • Comprehensive training and offline programming tools available Drive Technology • Digital Siemens drive concept • Siemens Sinamics V70 servo controller • Siemens Simotics 1FL6 servo motors • Siemens MOTION-CONNECT cables and connectors Spindle with Automatic Tool Change • Power consumption 8 kW (S1) / 10 kW (S6) • Speed 2,000 - 24,000 rpm, infinitely programmable • Ceramic bearings • Cooling via integrated electric fan • ISO 30 tool taper • Max. 26 mm shank or tool diameter with ISO30 / ER40 tool holders • Temperature monitoring • Safety check for tool taper in spindle • Compressed air monitoring • Compressed air must be supplied by the customer Extraction System for Automatic Tool Change • Hose connection 120 mm diameter • Pneumatic up/down for tool change • The extraction system is required for CE-compliant system operation Fgodpfx Aohwd Dnoh Doh Tool Magazine • Linear tool changer • Prepared for 10 tool positions 6-Zone T-Slot Hybrid Table / High Pressure Vacuum Table • A combination of mechanical clamping and the additional benefit that a part can be held down by vacuum alone • Zones can be manually controlled via ball valves • Grid for use with foam rubber sealing

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Machine base, bridge, and uprights constructed from one-piece welded, stress-relieved, and machined steel • Main machine assemblies made from ribbed welded structures, optimized for best stiffness-to-weight ratio, vibration dampening, and high acceleration • Every machine design is validated and optimized using Finite Element Analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table allows convenient loading/unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover strip for optimal chip removal on all axes • Brushless digital AC servo motors and drives on all axes • Double-sided synchronized drive on X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double-end bearing units on Z axis • Precision planetary gears with minimal backlash • Enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded drag chain cables ensure high interference protection and operational reliability • X travel: 3,050 mm • Y travel: 1,550 mm • Z clearance: 200 mm • Z travel: 280 mm • Max. traverse speed: 80 m/min • Network connection via Ethernet Fedpfx Ahsflpmdo Djgh • Remote maintenance via Internet • Dimensions approx. 3,460 x 2,460 x 1,930 mm (L x W x H, without safety devices) • Total weight approx. 3,500 kg CNC Control • Siemens Sinumerik 808D Advanced • LCD color display • Mechanical keys, IP65 protection • 62-key operator panel • Technology-specific keyboard layout • Operator panel with 39 keys and 30 LEDs • LED tool number display • Rotary switches for feed and spindle speed • Handheld operator box with handwheel, axis & resolution selection, emergency stop • Front USB port (IP65) • Ethernet port (RJ45) • Comprehensive training and offline programming tools available Drive Technology • Digital Siemens drive concept • Siemens Sinamics V70 servo controllers • Siemens Simotics 1FL6 servo motors • Siemens MOTION-CONNECT cables and connectors Spindle with Automatic Tool Changer • Power consumption 8 kW (S1) / 10 kW (S6) • Speed 2,000 – 24,000 rpm • Ceramic bearings • Cooling by integrated electric fan • ISO 30 tool taper • Max. 26 mm shaft or tool diameter with ISO30 / ER40 tool holders • Temperature monitoring • Safety query for tool taper in spindle • Compressed air monitoring Extraction Device for Automatic Tool Change • Hose connection 120 mm diameter • Manual height adjustment • Pneumatically up/down for tool change Tool Magazine • Linear tool changer, mounted outside work area at rear of machine • Max. 12 tool positions • ISO30 / ER32 tool holders included (4x) 6-Zone High-Pressure Vacuum Table • Hard paper tabletop (25 mm thick) • Zones manually controlled via ball valves High-Pressure Vacuum Pump per Customer Specification Precision Tool Length Sensor CE Package Delivery, Commissioning & Training as agreed

Leto izdelave: 2020, Stanje: kot nova (razstavni stroj), Machine Data • Gantry system with a fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine components constructed from ribbed welded assemblies, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is validated and optimized using Finite Element Analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading by forklift or overhead crane • Ground precision guides with high preload and additional cover band for optimum chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side, synchronized drive on the X-axis (gantry drive) • Rack-and-pinion drive on X and Y axes • Precision ballscrew drives with dual bearing units on Z-axis • Precision planetary gearboxes with low backlash • Enclosed drag chains to protect cables from chips and dust • High-quality shielded drag chain cables provide high reliability against malfunctions and failures • X-axis working range 2,550 mm • Y-axis working range 1,550 mm • Z clearance 200 mm • Z travel 280 mm • Travel speed max. 80 m/min • Network connection via Ethernet • Remote maintenance via Internet • Dimensions approx. 2,960 x 2,460 x 1,930 mm (L x W x H, without safety equipment) • Total weight approx. 3,200 kg CNC Control • FlexiCAM ACS Control System Pro • High-performance industrial CNC control "Made in Germany" • DIN-ISO 66025 G-code compatible • Industrial PC with 17" touchscreen monitor as HMI • User-friendly machine control panel • Rotary switches for feed and spindle speed • Manual unit for setup operation with handwheel, axis & resolution selection, emergency stop button • Windows keyboard and mouse • Front USB port • Ethernet port (RJ45) • Includes remote maintenance via Internet • Control and operator panel integrated into the control cabinet Drive Technology • Digital Siemens drive concept Fgodpohwd Eajfx Ah Deh • Siemens Sinamics V70 servo controllers • Siemens Simotics 1FL6 servo motors • Siemens MOTION-CONNECT cables and connectors Spindle with Automatic Tool Changer • Power consumption 8 kW (S1) / 10 kW (S6) • Speed range 2,000 – 24,000 rpm, continuously programmable • Ceramic bearings • Cooling via integrated electric fan • ISO 30 tool taper • Max. 26 mm shank or tool diameter with ISO30 / ER40 tool holders • Temperature monitoring • Tool taper presence check in spindle • Compressed air monitoring • Compressed air supply required on customer side Extraction Device for Automatic Tool Change • Hose connection 120 mm diameter • Pneumatic up/down for tool change • Extraction device required for CE-compliant system operation Tool Magazine • Linear tool changer • Prepared for 10 tool positions 6-Zone T-slot Hybrid Table / High-Pressure Vacuum Table • Combination of mechanical clamping with the added benefit that a part can also be held with vacuum only • Zones can be manually controlled via ball valves • Grid for use with foam rubber gasketing