Obdelovalni center

FIRST MCV 300

FOR A LIMITED TIME ONLY! SPECIAL PRICE!

CNC machining center with Siemens 828D ShopMill CNC path control.
Robust Meehanite cast-iron construction, Turcite box guideways, and hand-scraped bearing surfaces.
Equipped with hardened and precision-ground box ways and direct drives on all axes.

Robust Meehanite cast-iron construction, Turcite box guideways, and hand-scraped bearing surfaces.
With hardened and ground box guideways and direct drives on the axes.

Technical Specifications:
TABLE
Table area: 700 x 350 mm
Table height from floor: 835 mm
T-slots: 16 mm x 63.5 mm / 4 slots
Workpiece weight, max: 350 kg

Travel distances:
X: 610 mm
Y: 355 mm
Z: 460 mm
Distance spindle center to column: 415 mm
Distance spindle nose to table: min. 70 mm / max. 530 mm

SPINDLE
Spindle taper: SK 40 / DIN 69871 (drawbar: DIN 69872)
Spindle speed (infinitely variable): 8,000 rpm
Spindle drive motor Siemens: 7.5 / 11.0 kW

AXIS FEEDS, digital feed motors, direct drives
All three feed motors are directly flange-mounted. Drive system without timing belts!
Ballscrew manufacturer: HiWin

X-Axis
Feed motor: Siemens
Ballscrew: Ø32 x 10; C5

Y-Axis
Feed motor: Siemens
Ballscrew: Ø32 x 10; C5

Z-Axis
Feed motor: Siemens
Ballscrew: Ø32 x 10; C5

TRAVERSE SPEEDS:
Rapid traverse: 20 m/min for X and Y axis, 18 m/min for Z axis
Feed rates: X-Y: 1–10 m/min

ACCURACY
Positioning: (within 300 mm) +/- 0.005 mm
Repeatability: +/- 0.004 mm

TOOL CHANGER
Tool holder: DIN 69871 with drawbar DIN 69872

Standard changer system: disc-type tool changer without arm
Capacity: 10 tools
Tool change time: approx. 20 seconds max.
Max. tool weight: 7.0 kg
Max. tool diameter: 93 (120) mm
Max. tool length: 300 mm

AIR SUPPLY
Required pressure: 6.5 bar
Air consumption: 300 l/min

Standard Equipment:
- Siemens 828D CNC control with "ShopMill" operator interface
- Wide selection of milling and drilling cycles
- Machining cycle for contour pockets/contour spigots with islands, etc.
- Graphic functions
- Tool management
- User CF card slot on control panel front
- RS 232 C interface
- USB interface on control panel front
- RCS Commander: front-mounted ETHERNET interface for notebook PC
- 100 Mbit/sec TCP/IP ETHERNET interface for integration into company network
- Portable electronic handwheel
- Rigid tapping (thread cutting without compensating chuck)
- Spindle orientation
- Color LCD 10.4"
- Manual operation in all 3 axes
- Semi-automatic mode with manual feed control
- Automatic operation with cycle function, CNC operation without prior CNC knowledge
- ISO programming
- Linking of cycle and ISO programs
- Large program memory
- Fully enclosed cabin (CE)
- Heat exchanger for control cabinet
- Automatic tool clamping
- Automatic tool changer with 10 tools
- Spindle air blow
- Coolant system including oil separator
- Automatic centralized lubrication
Ncodpfxsr A Eufo Abbel
- Work lamp
- Electronic handwheel for all 3 axes
- CE compliance, EMC filter
- 24-month full warranty Siemens “RSV”
- Dual color paint: white RAL 7035, black RAL 7021

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.