1 umrl 2 piha glavo

FIDE EF1

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Godpjvc Aklofx Afweua Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: dober (rabljeno), Leto izdelave: 1970, For sale: Hilgeland forging machine, model CH5AL The machine is in perfect technical condition. Machine weight: approx. 20 tons. The forging machine comes with extensive tooling. Loading provided. Max diameter of normalized bolt: 16 mm. Godpfx Afju Szucjwsua Max length: 200 mm.

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 39035,

Leto izdelave: 1988, stanje: dober (rabljeno), Carlo Salvi 1-stopenjski, 2-udarni stroj Model 780/SV Maksimalni premer odrezka (mm): 6,35 Maksimalna dolžina odrezka (mm): 97 Gusdpfxohrdmxo Afwsa Maksimalna dolžina izmeta (na strani matrice) (mm): 80 Maksimalna hitrost (kosov/min): 360

Stanje: rabljeno, Leto izdelave: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm Vertical automatic feed Equipped with fine-pole electro-magnetic chuck Grinding wheel diameter: 300 x 50 x 76.2 mm Includes paper band filtration unit and manual dresser on top Various wheels and flanges included Weight: approx. 2,400 kg Required floor space: approx. 2,500 x 1,800 x height 2,500 mm Gujdpjwq Nc Nofx Afwja The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please feel free to contact us.

Stanje: dober (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, 2-BLOW COLD HEADER NATIONAL M5 For the production of partially pierced parts Fully operational Recently overhauled! Number of dies: 1 Output (pieces per minute): 300 Rivet length: 20 mm Maximum piercing depth: 5 mm Cutoff diameter: 5 mm Floor space (width): 1,300 mm Floor space (length): 2,690 mm Main motor power: 7.5 kW Net weight: 3,100 kg Gross weight: 3,700 kg Guedpfxetxni Nj Afwsa

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Gujdpfx Aouz If Nofwea Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Working width: 2300 mm, maximum roll diameter: 1500 mm, working speed: 180 m/min, including crane runway and longitudinal cutting device. Shaft, timing belt, and wiring have been renewed. Guedpfx Ajd Hr Uzsfwoa

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, CNC: HEIDENHAIN 530 Drilling diameter: Ø 32 mm Drilling length: 1,000 mm X-axis travel: 2,000 mm (table) Y-axis travel: 800 mm (vertical) Z-axis travel: 2,000 mm (column, T-structure) Table dimensions: 1,500 x 1,000 mm Table load capacity: 7/10 tons Indexing angle: 360° Milling spindle: SK40 M30, 200 cm³/min Motor power: 11 kW Spindle speed: 6,000 rpm Tool changer: 24 positions Machine dimensions: 5,600 x 5,000 x 3,320(h) mm Gujdpfsvznyisx Afwoa Coolant pump: 100 bar

Stanje: rabljeno, Leto izdelave: 1995, x travel 1200 mm y travel 600 mm z travel 600 mm Table size 1300 x 600 mm Max. workpiece weight 2000 kg Spindle taper ISO 50 Spindle speeds - stepless 30 - 3500 rpm Feed rates stepless 1 - 6000 mm/min Rapid traverse 10 m/min Drive power - milling spindle 18 kW Spindle torque 500 Nm Distance spindle/clamping surface max. 267 - 867 mm Distance table/vertical head 58 - 658 mm Mains voltage 380 V / 50 Hz Gjdpfx Aevw Duhjfwoua Control voltage 230 V Total power requirement 22 kW Machine weight approx. 6.5 t Dimensions 3.6 x 4.2 x 2.3 m CNC control DR. HEIDENHAIN TNC 360, hydraulic tool clamping device, electric handwheel, manually swiveling vertical head, coolant system,