GLOBOKI VRTALNI CENTER

IXION TLF 1004

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj za brušenje zobnikov Niles ZSTZ 630i. Stroj je v celoti delujoč, na zahtevo lahko pošljemo video. Gbjdpfxoxzfuge Anfol

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Misinvestment by a corporation. Machine is brand new and unused (already delivered). The machine is available immediately with no lead time. An absolutely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: Fully closed scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optionally 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: Direct drive Minimum index: 0.001° Maximum rotation speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: Central spindle cooling Internal coolant supply: optional CTS 7 MPa Tool magazine: Chain-type magazine, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [with >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment/options: Workpiece probe Gbsdpfx Aexizdaonfjl Tool measurement Laser tool control (optional) High-pressure coolant supply 7 MPa (optional) Chip conveyor Fully enclosed with roof Dimensions: n/a Weight: n/a Connection data: n/a

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled. Gbjdpeqhkukefx Anfsl

Leto izdelave: 1998, stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Pulse Duration (Time): CW / 90 ns Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Gbedpod Dhw Nefx Anfel Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Data: • Machine type: ZSK 40 • Screw diameter: 40 mm • Screw length: 7 barrels × 4 D → approx. 28 L/D • Main drive: 34.5 kW • Motor speed: 1,800 rpm • Screw speed: 40 – 400 rpm • Max. torque per screw shaft: 325 Nm • Heating: electric, connection load approx. 17 kW • Cooling: water cooling unit • Temperature control zones: 6 zones • Housing temperature measurement points: 6 • Material temperature measurement point: 1 • Material pressure measurement point: 1 Barrel Configuration: Godpoycuuysfx Anfsbl • Feed barrel with liquid addition port • Open barrel with insert and 2 liquid addition ports • Multiple closed barrels with openings for liquid addition or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance due to modular mixing and kneading elements • Modular system for screws and barrels • Drive and process sections mounted on a sturdy base frame Areas of Application: • Plastics compounding • Masterbatch production • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Operating Time: According to the operating hours counter, the machine has run for less than one year and is therefore in excellent, almost as-new condition. The screw elements are also as new. Options & Customization: Upon request, we offer design and installation of suitable tooling, e.g. strand dies, as well as integration of additional peripheral equipment such as screen changers, pelletizing lines, dosing equipment, or other customer-specific components. The machine can thus be individually configured according to customer requirements and delivered ready for operation.

Stanje: rabljeno, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Gjdpfx Anetycg Sefjbl Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Equipped with rack shaping device Change gear set Year of manufacture: approx. 1981

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Gbedpfxorpn Dvo Anfsl Tehnični podatki so prikazani na sliki.

Stanje: novo, moč: 90 kW (122,37 KM), Leto izdelave: 2026, Dvovretenski drobilnik s kladivom je vrsta drobilnika, pri kateri sta na eni osi nameščena dva rotorja, ki skupaj tvorita vrteči se rotor. Dvovretenska zasnova izboljšuje zmogljivosti drobljenja ter zagotavlja bolj učinkovito in zanesljivo rešitev v primerjavi z enovretenskimi drobilniki. Ključne lastnosti in značilnosti dvovretenskega drobilnika s kladivom: 1. Dva rotorja: Kot že ime pove, ima drobilnik dva rotorja, ki se vrtita v nasprotnih smereh na skupni osi. Ta konfiguracija omogoča večjo silo udarca in večjo moč drobljenja. 2. Visoka zmogljivost: Zaradi dvojnega rotorja lahko drobilnik obdela večje vhodne kose in zagotavlja večjo kapaciteto kot drobilniki z enim rotorjem. Primeren je za drobljenje materialov z visoko trdoto in velikimi dimenzijami. 3. Večnamenskost: Dvovretenski drobilniki s kladivom so vsestranski in se uporabljajo v različnih panogah, kot so redukcija apnenca, sadre, premoga in drugih podobnih materialov v rudarstvu, cementni in gradbeni industriji. 4. Drobljenje z udarcem: Glavni mehanizem drobljenja je udarec kladiv ob material. Material se dovaja v drobilnik, kjer ga hitro vrteča se kladiva razbijejo in razdrobijo. 5. Nastavljiva režna odprtina: Ti drobilniki pogosto omogočajo nastavljanje reže med rotorji in udarnimi ploščami, kar omogoča nadzor nad končno velikostjo zrn. Gbsdpfxoq Nf Ene Anfjl 6. Trpežnost: Robustna konstrukcija omogoča dolgotrajno uporabo pri težkih materialih in neprekinjenem obratovanju. 7. Manjša obraba: Dvojni rotor omogoča bolj enakomerno porazdelitev obrabe med kladiva in druge obrabne dele, kar lahko podaljša življenjsko dobo drobilnika. Tipične tehnične specifikacije: (Podatki se lahko razlikujejo glede na proizvajalca – navedene so standardne vrednosti za industrijske modele): Model (velikost rotorja), Maks. vhodna velikost, Izhodna velikost, Kapaciteta (t/h), Skupna moč motorjev 600 × 400, ≤110 mm, ≤3 mm, 10 – 15, 18,5+18,5 kW 800 × 600, ≤120 mm, ≤3 mm, 40 – 50, 45+45 kW 800 × 800, ≤180 mm, ≤3 mm, 50 – 60, 45+55 kW 1000 × 800, ≤180 mm, ≤3 mm, 70 – 80, 75+55 kW 1100 × 1000, ≤200 mm, ≤3 mm, 70 – 100, 90+110 kW 1400 × 1200, ≤200 mm, ≤3 mm, 90 – 110, 132+160 kW Za dodatne informacije o dvostopenjskem drobilniku s kladivom oziroma drobilniku z dvema rotorjema nam pošljite sporočilo – naša ekipa vam bo odgovorila v najkrajšem možnem času.

Stanje: zelo dobro (rabljeno), Kolbus casing-in line with joint forming by Smyth, after a general overhaul at GM Gross. The machine is still in production. Format / size: 100x125mm – 260x350mm Book block thickness / Book block thickness: 4–60 mm Gedowm E Rnepfx Anfebl Capacity: 500–800 blocks per hour

Stanje: dober (rabljeno), Leto izdelave: 1970, For sale: Hilgeland forging machine, model CH5AL The machine is in perfect technical condition. Machine weight: approx. 20 tons. The forging machine comes with extensive tooling. Loading provided. Godpfsu Szucsx Anfebl Max diameter of normalized bolt: 16 mm. Max length: 200 mm.