Namizni vrtalni mlin

Fermat WFT 13 R CNC

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina središča: 250 mm, teža obdelovanca (maks.): 750 kg, dolžina brušenja: 2.000 mm, premer brusilnega koluta: 500 mm, skupna širina: 2.000 mm, skupna dolžina: 6.000 mm, skupna višina: 2.000 mm, premer brušenja: 320.400.500 mm, hod vretena: 50 mm, teža obdelovanca med konicami: 500 g, razdalja med središči: 2.200 mm, premer obdelovanca med konicama: 500 mm, največja hitrost vretena: 560 obr/min, hitrost vretena (min.): 1 obr/min, dolžina podajanja os Z: 2.500 mm, hitrost vretena za brušenje: 1.400 obr/min, skupna masa: 8.000 kg, trajanje garancije: 24 meseci, največja hitrost vretena obdelovanca: 560 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Technical Main Data: Swing diameter: mm 320, 400, 500 Distance between centers: mm 1000, 1500, 2000, 3000 Maximum workpiece weight between centers: kg 500 Maximum workpiece weight between centers (cantilevered, incl. standard grinding wheel): mm 500 (600 mm optional) Peripheral speed: m/sec 45 Workpiece spindle taper, in tailstock quill: Morse 5 Infinitely variable spindle speed control: rpm 1–560 Minimum programmable increment - in X axis (related to diameter): mm 0.001 - in Z axis: mm 0.005 Table swiveling range: ° +6 / –4 Grinding wheel head swiveling range: ° ±30 Workpiece headstock swiveling range: ° 90 Grinding spindle drive motor: kW 11 Workpiece headstock drive motor: kW 2.5 Total motor power: kW 15 Pneumatic supply: kPa 0.6 Kjdpfxepy A Iue Ah Ajnf Machine weight: kg approx. 8000

Stanje: rabljeno, Tool holder, milling holder, milling tool - Quantity: 515x SK50 tool holders with tool holder from KOMET GEWEFA and others - Holder standard: ISO 7388-1 SK50 - Pull stud standard: ISO 7388-3 - Various designs/executions Ksdpfopgkwgox Ah Aenf - Drill chuck: hydraulic chucks, reduction sleeves, face mill cutter heads, shell end mills, spindle tools - Suitable for tool changers - Scope of delivery exactly as shown in the pictures - Dimensions: 10x Euro pallets - Weight: 2464 kg

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.250 mm, In good technical condition. Year of modernization: 2005. Main motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including switch cabinets): 7800 x 7200 mm Maximum machine height: 4900 mm Occupied floor space: 50 square meters Required installation height: 5800 mm Knjdpfx Aewc Sm Ioh Aef Maximum workpiece weight: 12,000 kg Spindle diameter: 130 mm Spindle taper: ISO 50 Spindle traverse: 800 mm Spindle speed range: 5 to 1800 rpm Distance from spindle axis to table clamping surface (Y): 70 mm Table clamping surface: 2500 x 1800 mm

Stanje: dober (rabljeno),

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Ksdjd I A Dhspfx Ah Asnf Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: dober (rabljeno), Leto izdelave: 2002, Stroj je v dobrem stanju. Stranske plošče so bile odstranjene, zato ni potreben prevoz z nadširino. Kjdpfetwpamox Ah Ajnf

Stanje: rabljeno, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Maximum workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock face plate: 300 - 1600 mm with special jaws up to 2050 mm Clamping diameter in tailstock face plate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Face Plate Face plate diameter: 2000 mm Face plate speeds, steplessly variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Center angle of flange-mounted centers: 70° Support Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, facing: 800 mm/min Feeds stepless, longitudinal: 0.6 - 300 mm/min Feeds stepless, facing: 0.3 - 120 mm/min Ksdpsxddvnsfx Ah Ajnf Max. cutting force on support: 20,000 kg Tailstock Face plate diameter (removable): 1650 mm Clamping diameter of face plate: 1400 mm Center angle of flange-mounted centers: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first support Copying length: 8,500 mm Max. copying depth in one stroke: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one stroke: 2,700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rule for taper turning, setting angle up to 8° and maximum taper length (in one stroke) of 2000 mm, setting accuracy ± 5 minutes. A guide rule for taper turning, setting angle up to 15° and maximum taper length (in one stroke) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on the headstock.

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Knjdpfx Aod Ev Upjh Aof Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Leto izdelave: 2005, x-pot 5.000 mm Knsdpfxexcbiij Ah Asf y-pot 3.100 mm z-pot 1.200 mm Krmiljenje HEIDENHAIN TNC 530 HSCI Mizna površina 5.000 x 2.000 mm T-utori 11 Širina T-utora 22 mm Obremenitev mize 30.000 kg Hitri pomik X-os 20.000 mm/min Hitri pomik v y-smeri 30.000 mm/min Hitrost vretena 6.000 U/min Moč vretena 32 kW Vpenjalo ISO stožec ISO 50 Razdalja med stojali 2.800 mm Notranje hlajenje, dovod 20 bar Teža stroja pribl. 65 t Potrebni prostor pribl. 15.100x6.200x6.250 mm -Pozicioniranje glave UAD II 0,1º / 0,1º -2 območja hitrosti -Orodje vpenjanje hidravlično -Glava 2 – vertikalni vretenec -ATC pozicije 30 -2 vzdolžna transporterja ostružkov -1 prečni transporter ostružkov -Prenosni ročni kolesni krmilnik -Laserska priprava orodja

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, skupna dolžina: 2.210 mm, skupna širina: 1.530 mm, skupna višina: 1.940 mm, skupna masa: 1.200 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 50 mm, moč: 6 kW (8,16 KM), vhodni tok: 18 A, Edge Rounding up to 1100 mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both external and internal contours of parts made of stainless steel, steel, or aluminum, which have been cut using laser, shear, or punching machines. This machine processes parts of various dimensions, including products as small as 50x50 mm. The DM1100 C features a station with double cross belts for edge rounding, delivering clean, smooth, and burr-free edges on entire workpieces. Knjdpfstzfntex Ah Ajf DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200