Pršilna stena - odsesavanje laka

Felder Spritzwand FSW 2000

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 Pedpod Nuu Hefx Agpord End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Leto izdelave: 2010, Stanje: rabljeno, Panel return system for use with a single edge banding machine The panel is transported to the operator via a motorized conveyor belt and a roller/conveyor table. Moeller mini control unit Maximum panel dimensions: 2500 x 1450 mm Maximum panel height: 60 mm Working speed: 8 - 25 m/min Pedpfxorq Dmre Agperd Working height from floor: 835 - 960 mm

Leto izdelave: 1995, Stanje: nepreverjeno (rabljeno), Connected load 380V 55A PMS control unit Pre-milling unit 1961 Magazine 1901 Gluing station 1906 Pressure unit 1926K Podpfx Aonxkm Esgpjrd End trimming unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm radius up to 15 mm flush Radius scraper 1927 Form milling unit 1983 Buffing unit 1941 Extraction ports 1x160, 1x125 mm Compressed air connection 6 bar

Stanje: rabljeno, Leto izdelave: 1994, Debelina robnega traku: 0,3 - 20 mm, maksimalna višina traku: 66 mm, minimalna dolžina traku: 200 mm. Minimalna širina obdelovanca: 60 mm, minimalna dolžina obdelovanca: 140 mm, debelina obdelovanca: min. 6 mm, maks. 60 mm. Podajanje 8 ali 16 m/min. Lepljenje z Ultra - Granupress. Odrezovanje: 2 žagi, nagibne 0 - 15°. Rezkanje, radij / na ravno, kopiranje kotov, strgalo, pnevmatsko poliranje. Lokacija skladišča: Nattheim. Psdpfxjvvkdtj Agpsrd

Stanje: rabljeno, številka stroja/vozila: 007186, Type of applied edge: thin edge, thick edge Adhesive system: EVA Joint trimming: yes Pedpfx Ageu T Tuwspsrd Multifunction unit: yes Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 10 units

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Prsdpfx Aevvizksgpod

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Pedpfjvymdqex Agpord Edge feed for coil and strip material Jointing unit with 2 milling heads Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Max. edging overhang per side: 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Psdpfxsvvkd Te Agpsrd

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in roll form (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Predpfouhv R Dex Agpsd Safety and noise protection cabin Retractable positioning cams, distance (mm): 1000 FORMAT PROCESSING (for each side): Pre-milling cutter (1 x 4.5 kW) Zerspanner KD 11 (2 x 6.6 kW) Jointing milling unit UF 20/S2 (2 x 4 kW) EDGE BANDING SECTION (for each side): “ZERO JOINT” SCHUGOMA Kantenking gluing unit (Option: EVA/PU glue) Edge magazine for rolls (2 compartments) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 BEVEL/STRAIGHT (2 x 0.22 kW) feed speed 25 m/min Pre-milling unit BF10 (2 x 0.55 kW) Multifunctional unit (radius and profile milling) FK11 (2 x 0.4 kW) Multiple-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spray unit (for polishing fluid) No. 2 universal milling units for grooving/rabbetting and profiling SF20 (2 x 6.6 kW) Powered panel infeed roller conveyor with "HOMAG" separation system Model POWER TBL 100/20/25

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Type of adhesive: PUR adhesive, glue application system: cartridge-based, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16 m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Includes various spare parts and return conveyor Ligmatec. Documentation available. On-site inspection possible. Podeugmw Eopfx Agpord