Stroj za robne trakove

Felder G 480

Stanje: rabljeno, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, specific pressing force max. 2 kg/cm² Heating 2x 1.8 kW - Long-belt sander 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Sliding table saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control with main and emergency stop switches Machine on undercarriage Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg Dcsdpfxjxl Ha So Afned To avoid misunderstandings, an on-site inspection by appointment is possible and recommended. Sale is made in "as is" condition. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. The following applies: "bought as seen". Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery conditions: ex stock.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Machining Center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills plus grooving saw, 6-position tool changer. The NC410 control system features a floppy disk drive, color screen, and very simple, graphically assisted programming options. Additionally, the Rover 20 already enables pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Djdslc Dwnopfx Afnocd Ex site

Stanje: dober (rabljeno), Leto izdelave: 2002, Edge banding machine with jointing milling unit; otherwise fully equipped. PU glue can be used. Dcedpfsgmn H Asx Afnjd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, širina obdelovanca (maks.): 40 mm, skupna višina: 950 mm, največja dolžina izdelka: 3.672 mm, This BRANDT edgebander Ambition 1110 KDF 110 was manufactured in 2016. It is a single-sided edgebanding machine designed for processing straight panel edges. With an overall length of 3,672 mm and a feed speed of 8 m/min, it is suitable for workpiece thicknesses from 8 to 40 mm. Please check the availability of this BRANDT edgebanding machine Ambition 1110 KDF 110. Contact us for further details. • Machine type: Single-sided edgebanding machine for straight workpiece edges • Feed speed: 8 m/min • Working height: 950 mm • Workpiece and edge parameters • Workpiece thickness: 8-40 mm • Workpiece width: min 70 mm (thickness 8-22 mm) or 120 mm (thickness 23-40 mm) • Edge material (coil): 0.4-3 mm • Edge material (strips): 0.4-3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) Dcsdpfxjyir S No Afned • Jointing unit: 2 x 0.75 kW, 200 Hz motors (one infeed, one outfeed), equipped with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge overhang trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable between flush, radius, and chamfer trimming • Profile scraper: For rounding or chamfering pre-milled PVC edges (max. 3 mm) • Glue joint scraper: Removes glue residue in the glue joint area • Control and electrics • Controller: EASY CONTROL EC 10+ with 7" wide-format touchscreen • Program storage: Up to 20 processing programs • Supply voltage: 400 V / 3 Ph / 50 Hz • Full load current: 15.0 A • Pneumatics: Min. 6 bar • Operation and maintenance • Adjustments: Manual setting of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for the transport chain (standard) • Safety: CE-compliant; dust tested (TRK max. 2 mg/m³) Technical Specification Feed Speed 8 m/min

Stanje: dober (rabljeno), Leto izdelave: 2011, Panelna žaga HOLZ-HER Tip: 1255 Stanje: rabljeno Leto izdelave: 2011 Dolžina reza: 6300 mm (maks.) Navpična višina reza: 2200 mm (maks.) Vodoravna višina reza: 2200 mm (maks.) Debelina obdelovanca: 60 mm (maks.) Višina predreza vodoravno: višina reza Višina predreza vodoravno: 2040 mm (maks.) Napetost: 400V 50 Hz Dcodpfx Afsx Hyr Hensd Teža: 920 kg Oprema: - Navodila za uporabo - Naslednji UVV pregled: 05/2026

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit - Cross-cutting unit - Milling unit - Fine milling unit - Scraper - Buffing unit Dcoded Inktspfx Afnod

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 144 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 694355, skupna masa: 235 kg, nosilnost: 16 kg, doseg roke: 1.610 mm, This is a KUKA KR 16-2 R1610 industrial robot, year of manufacture 2017. We are also pleased to offer you this robot as a fully refurbished unit upon request! The robot comes with the following options: Dcedpfx Ast N Szpefned - Board Package - EthernetKRL - Load Data Determination - Profinet KRC-Nexxt - Remote Service - Safe Operation - UserTech

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Leto izdelave: 2011 Stanje: stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Brezstopenjska hitrost podajanja 10–18 m/min Krmiljenje Edge Control 19 z 18,5" barvnim zaslonom na dotik Agregat za dodajoče rezkanje Podajanje robnih trakov Postaja za nanašanje lepila, kartuša, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Agregat za krajšanje Večnamenski rezkalni agregat Kopirni rezkalni agregat Agregat za obla robove Ravna rezkalna rezila Polirna enota Debelina obdelovanca 6 - 60 mm Debelina robnega traku 0,4 - 8 mm Minimalna širina obdelovanca 60 mm Dcodpfx Afjwka N Tsned Najkrajša dolžina obdelovanca 180 mm Dimenzije: 5300x1500x1600 mm Teža: 2200 kg Lokacija: 65439 Flörsheim Razpoložljivost: na kratki rok

Stanje: dober (rabljeno), Industrijski roboti Proizvajalec: Kuka Tipi: KR6, KR6-2, KR6arc Tipi: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Vsi tipi z krmilnikom KRC2ed05 Kuka KR6 KRC2ed05 Leto izdelave 2006 Kuka KR6-2 KRC2ed05 Leto izdelave 2011 Kuka KR6arc KRC2ed05 Leto izdelave 2006-2007 = več na zalogi Kuka KR16L6 KRC2ed05 Leto izdelave 2009 Dcedpfetuc U Rsx Afnjd Kuka KR16L6-2 KRC2ed05 Leto izdelave 2011 Kuka KR16 KRC2ed05 Leto izdelave 2007-2009 = več na zalogi Kuka KR16-2 KRC2ed05 Leto izdelave 2010-2012 = več na zalogi Kuka KR16-2 Speed KRC2ed05 Leto izdelave 2012 = več na zalogi Kuka KR16-2 Foundry KRC2ed05 Leto izdelave 2012

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, številka stroja/vozila: 25167180701, Funkcionalnost: popolnoma funkcionalen, moč: 4,5 kW (6,12 KM), višina obdelovanca (maks.): 60 mm, skupna višina: 60 mm, skupna širina: 1.000 mm, potreba po zraku: 2.000 m³/h, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 20 m/min, vrtljajska hitrost (min.): 4.000 obr/min, CNC Processing Center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical Specifications: Axes: X-Axis: Max. workpiece length: unlimited Dcsdpfxexz Hgds Afnjd Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-Axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-Axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and also on the length-to-width ratio. – Air tables in the working area – Roller support at infeed and outfeed – Plate measuring sensor – Ball screw and linear guides – Rack and pinion drive – Centralized lubrication – Import of DXF files Milling unit Including Masterwork Software extension Spindle speed: 1,000 to 18,000 rpm. Motor (frequency controlled): 3.3 kW Incl. integrated extraction control (While drilling, only the drill head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 drills for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Incl. grooving saw blade, 2 diamond milling cutters, 1 WPL finishing cutter Preparation for CLAMEX and door package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit designed for door processing for machine with tool changer, complete incl. dedicated tool change station in the tool changer, angle gearbox for receiving a mortise lock cutter, macro for mortise lock Automatic centrally controlled lubrication Monitoring camera