Širokopasovni brusilnik Felder FW 952

Felder FW 952

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. Iodpsxqggcofx Af Tsal (We only respond to inquiries that include your full address and telephone number!)

Stanje: novo, Število vreten: 6 kos Delovna širina: 250 mm Višina skobeljenja: 150 mm Dolžina poravnalne mize: 2500 mm Motor za podajanje: 4 kW Hitrost podajanja: 6-24 m/min Teža: 4770 kg Dimenzije (D/Š/V): 4722x1860x1776 mm Štiristranski skobeljni stroj Kuper SWT XL-6 v okenski izvedbi z elektronskim aksialnim in radialnim nastavljanjem vreten. Masivno ogrodje stroja, nepopustljivo in z nizko vibracijo. Število vreten: 6 Delovna širina: 250 mm Delovna višina: 150 mm Dolžina poravnalne mize: 2500 mm Iodpfxjvnv Ube Af Tsal Hitrost vreten: frekvenčno krmiljena 4.000 - 8.000 vrt/min Hitrost podajanja: 6-24 m/min Podroben opis najdete v pripeti PDF datoteki! (Tehnični podatki po navedbah proizvajalca - brez garancije!)

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Iodpfx Aeg A D Anof Teal Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), For sale: Costa A1 ACT 1150 bottom sander, year 2001. Configuration: soft drum with electronic segmented pad. Working width: 1150 mm Abrasive belt dimensions: 1180 x 2620 mm Pressure rollers for short workpieces. Vacuum fan included. Iasdpjgq U R Nefx Af Tsl Air blow-off on both units. Total weight: 2500 kg Two motors: 7.5 kW and 15 kW Total power: 27 kW Condition: very good, regularly serviced machine. Available immediately.

Stanje: novo, The ALTENDORF F 25 offers everything you need from a sliding table saw in a compact footprint. Whether for your first own workshop, daily operations, industrial production, or as a powerful secondary machine — the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be processed effortlessly thanks to outstanding precision, easy handling, and excellent cut quality. The single-sided tilting saw unit also allows for angle cuts. The smooth-running double roller carriage, based on the Altendorf system, is part of the standard equipment, as are the digital height and tilt displays. This machine is equally suited for beginners and professionals alike. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Prepared for retrofitting of a scoring unit Isdpfx Afeu R S Hce Tjal ----- Technical Data ----- Swivel range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade diameter: 315 mm Max. projection of saw blade: 104 mm Non-CE version: max. saw blade diameter: 350 mm, max. saw blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speed: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood optional - - New demonstration machine -

Stanje: novo, Leto izdelave: 2025, for processing smaller parts, primarily solid wood Simple and safe operation Combination sanding unit with sanding shoe for calibrating solid wood Control panel located at the front Standard with ribbed steel roller, Ø 120 mm, and hard sanding shoe with graphite layer on replaceable insert Motorized height adjustment of the worktable Electronically controlled sanding belt oscillation Manual star/delta motor start Mechanical display of table position Ammeter for displaying current draw of the sanding unit Iajdpecnw U Rjfx Af Tsl Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal design for calibration and sanding tasks on solid wood Model BBS 630 C Item No. 5343065 Technical Data Working width: 630 mm Working roller diameter: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed drive motor: 0.43 kW Table height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Belt blower operating pressure: 8 bar Extraction connection diameter: 150 mm Extraction capacity: 3,000 m³/h Dimensions (L x W x H): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving at warehouse 54634 Bitburg

Stanje: rabljeno, Leto izdelave: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Controller: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC MOULDER AND PLANER ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4.5 up to 8,000 rpm - Width and height positioned by motor: left spindle radial upper spindle axial - Feed carriage positioned by motor - Additional motorised positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tooling, cutting depth taken off, and feed speed. Adjustments to operating parameters may be required if necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: unit cannot be operated without jointing rabbet cutter Extraction nozzle D = 125 mm Tool clamping system: quick-change nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Iasdpfxewgwmnj Af Tjl Tool clamping system: quick-change nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter...

Stanje: dober (rabljeno), Leto izdelave: 2003, skupna masa: 1.900 kg, Paoloni Kalibra 30 – maximum sanding width: 110 cm – 15 kW main motor – first unit with metal roller – second unit with platen and rubber-coated roller – platen control from the operator panel Iajdpfx Aferumipo Tjl – weight: 1,900 kg The machine is in very good working condition.

Stanje: rabljeno, Leto izdelave: 2023, Used machine Year of manufacture: 2023 Condition: in absolutely mint condition, machine is unused Features and technical data: - 2-belt machine; 1st belt: roller, 2nd belt: pad - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibrating roller: 150 mm - Sanding pad width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Continuously adjustable feed carpet gearbox with speed range: 4–20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation “Eco Gear Patent System” - 1 unit drum brake for belt braking - Swiveling roller for belt tensioning - 3 pressure rollers; rubber-coated - Emergency stop bar at the feed - Electronic display of workpiece thickness - 2 roller conveyors with 2 rollers each at infeed and outfeed - 1 extraction nozzle, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - no valves Iodpfx Ajw E Ty Ujf Tsal - no light barrier - not sensitive to dust - energy-saving, environmentally friendly system - Since 2008, this machine model with the mentioned system has operated continuously without any lateral belt drift!!!! - Incl. Unitek belt motor 14.7 kW instead of 11 kW (Promotor) - Incl. Unitek pneumatic sanding pad with application control synchronized to feed speed Availability: short-term Location: Saxony-Anhalt

Stanje: novo, Typ R-RP630 Arbeitsbreite: 630 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe (Werkstückdicke): 3-110 mm Vorschubgeschwindigkeit: 6-30 m/min Gesamtmotorleistung: 20,25 kW Motorleistung erste Einheit: 11 kW Motorleistung zweite Einheit: 7,5 kW Vorschubmotor: 1,5 kW Hubmotor: 0,25 kW Isdedflp Ispfx Af Tjal Walzendurchmesser erste Einheit: 190 mm Walzendurchmesser zweite Einheit: 190 mm Schleifbandabmessung: 650 x 1920 mm Betriebs-Luftdruck: 0,6 MPa Absaugvolumen: 8.000 m³/h Transportmaße (LxBxH): 1.900 x 1.200 x 2.100 mm Gewicht: 1.200 kg