Stroj za robno lepljenje

Felder FORMAT 4 PERFECT 608

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Itjdpfx Asxfh Tmsg Ajp 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: Isdpew Nadtsfx Ag Ajtp - Control unit with 10.4" color touchscreen - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Roller support plate, ball bearing-mounted, diameter 770 mm - 2-motor jointing milling unit / 2 x 1.1 kW - Edge feeder for coil and strip material, 0.4 - 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Pre-melting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - 2-motor end trimming unit / 2 x 0.50 kW - 2-motor multifunction unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner rounding unit - Radius scraper - Flat scraper - 2-motor polishing unit (buffing wheel) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short-term Location: 65439 Flörsheim

Stanje: rabljeno, Leto izdelave: 2010, skupna dolžina: 5.250 mm, skupna višina: 1.780 mm, skupna širina: 1.060 mm, Teža: 1.500 kg Cena: Na zahtevo - Letnik: 2010 Ijdpfowp D Udex Ag Astp - Dokumentacija na voljo: Ne - CE oznaka prisotna: Da - Serijska številka: 1969 - Transportne mere: 5250 mm x 1060 mm x 1780 mm (d x š x v) - Transportna teža [kg]: 1.500 kg - Transportni paketi [št.]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo Yorick Diebels

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Itedpsxuhpaofx Ag Aop Fully automatic edge magazine for rolls and strips Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: rabljeno, Leto izdelave: 2007, Frez za spajanje 1. Frezalna postaja R=2,5 Kombinirani agregat Freza za zaokroževanje robov R=2 Poteg rezilo za ravnino Poteg rezilo za profil Pnevmatska nastavitev frezanja (ravno / radij) SPS krmiljenje z zaslonom na dotik Pro-face Zamenljiv zbirni bazen Predpriprava Posebnost: največja debelina obdelovanca 60 mm (brez spajanja) Obratovalne ure: 4270 h Lokacija skladišča: Nattheim Isdpfsxnlacex Ag Ajtp

Stanje: rabljeno, Leto izdelave: 2013, skupna dolžina: 4.800 mm, skupna višina: 1.700 mm, skupna širina: 900 mm, Teža: 1.250 kg Iedjwlv D Njpfx Ag Astp Cena: Na zahtevo Stroj za lepljenje robov Serijska številka: 200.04.007.13 400V 11 kW 3 faze 50Hz 28A Večnamenska rezkalna enota Lepljenje enota Višina obdelovanca: 8-60 mm - Leto izdelave: 2013 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Serijska številka: 200.04.007.13 - Transportne mere: 4800 mm x 900 mm x 1700 mm (d x š x v) - Transportna teža [kg]: 1250 kg Finančne informacije DDV: Cena je navedena brez DDV DDV/diferencirana obdavčitev: DDV je odbitna za podjetja Dostava in odkup možna kadarkoli za vso opremo iz industrijske panoge Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2007, skupna dolžina: 5.200 mm, skupna višina: 1.600 mm, skupna širina: 1.200 mm, Teža: 1.550 kg Cena: Na zahtevo - Leto izdelave: 2007 - Dokumentacija na voljo: Ne Itjdpew Rd Tzjfx Ag Aop - Serijska številka: 1328 - Transportne mere: 5200mm x 1200mm x 1600mm (d x š x v) - Transportna teža [kg]: 1550kg - Transportni paketi [kos]: 1 Finančne informacije DDV: Naveden cena je brez DDV DDV/diferencirana obdavčitev: DDV je za podjetja odbiten Dostava in odkup možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 12 m/min, skupna dolžina: 4.500 mm, višina obdelovanca (maks.): 60 mm, skupna širina: 1.200 mm, največja debelina roba: 10 mm, vrsta nastavitve višine: mehanski, moč: 11 kW (14,96 KM), Maks. debelina robnega traku: 10 mm Maks. debelina plošče: 60 mm Maks. debelina materiala v roli: 3 mm Maks. podajalna hitrost: 12 m/min Ročna nastavitev višine System za lepljenje s granulatom: lepilna kad spodaj Hitromenjalna lepilna kad: da Trakasti magazin: da Enota za lepljenje: da Enota za čelno žaganje: 2 motorja Poravnano/polmer Itedpfx Aew Av E Iog Aep Enota za strganje: profilna strgala, ravna strgala, da Polirna enota: da Izvedba: desnostranska Dolžina stroja: pribl. 4.500 mm x 1200 mm Krmiljenje: FORMAT 4 E-MOTION Cena brez DDV Stroj je še vedno v uporabi in ga je možno kadarkoli preizkusiti.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 14.360 h, Stroj za lepljenje robnih trakov Felder G580, otrezovalne enote za predhodno rezkanje, nanos lepila z valjčkom, pnevmatska predgiljotina, pritisni valji, žage za obrezovanje, rezkalna enota zgoraj-spodaj R1-R2, enota za zaobljanje vogalov: strgalo s profilom, ravno strgalo, polirnik, debelina traku 0,4-5 mm, maksimalna višina plošče 60 mm, pomik 11 m/min, glavna potrebna moč 7,22 kW, dolžina stroja 410 cm, Ijdpsxcg Nzjfx Ag Ajtp stroj dobro vzdrževan, pripravljen na test, neto cena,

Stanje: zelo dobro (rabljeno), Je v popolnem delovnem stanju, izgleda zelo dobro in ima malo delovnih ur. Opremljen je s predhodnim rezkanjem, krožnim žaganjem, zgornjim in spodnjim rezkanjem, obdelavo radijev, površinskim skobljanjem in poliranjem. Iodpfjxwqmasx Ag Ajtp