Vrtalni stroj z več vreteni

Felder FD921

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 432.08.202.22, globina vrtanja: 70 mm, vhodna napetost: 400 V, pritisk: 8 letvica, vhodna frekvenca: 50 Hz, moč: 1,5 kW (2,04 KM), FD 921 je opremljena z 21 vrtalnimi vreteni v razmiku 32 mm. Za vrtanje moznikov, vrstičnih lukenj in skodelastih tečajev se lahko uporabljajo svedri do premera 35 mm. Velika litoželezna miza, stranska prislona, pnevmatski pritiskači obdelovanca in ergonomski upravljalni elementi naredijo FD 921 za vrhunski moznični vrtalni stroj. Dodatni tehnični podatki: Število vrtalnih glav: 21 (11 desno, 10 levo-vrtečih) Razdalja med vreteni: 32 mm Maks. velikost obdelovanca: 850x3000 mm Fsdpfx Asyf A N Dobvepd Maks. višina obdelovanca: 65 mm Potreben zračni tlak: 6-8 bar Oprema: 11 nosilcev orodja s 5 mm desno rezalnim mozničnim svedrom 10 nosilcev orodja s 5 mm levo rezalnim mozničnim svedrom Sistem za bočni prislon z 8 ustavitvami 2 dodatna pnevmatska pritiskača Kotno vodilo za FD 21 Nosilec za stranske prislone in dodatno opremo Merilo za prenos razdalje litoželeznih prislonov Sistem vezave za podaljšanje mize

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal Fsdpowclkysfx Abvepd - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: zelo dobro (rabljeno), Belt Sander LANGZAUNER Model LZG Approximate table dimensions: 2500 x 800 mm Approximate sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of sanding belt Sanding belt cover (top) Work area light strip CE compliant Includes special sanding shoe Includes extraction fan NEW GRAPHITE CLOTH Notes on used machines: • Subject to technical changes, errors, and prior sale. • Quoted prices are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as seen, without any warranty entitlement. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!) Fsdpeuxnyusfx Abvspd

Stanje: dober (rabljeno), Leto izdelave: 2001, Prodajam 3-osni CNC obdelovalni center HOLZ-HER UNI-MASTER 7226 s prečnim delovnim mizo, letnik 2001. Konfiguracija: Glavno vreteno za 3 osi, popolnoma obnovljeno / vodno hlajeno Magazin za orodja za 6 HSK63 mest na glavi 1x utorna žaga v X-smeri Vrtalna glava s 16+4 vrtalnimi vreteni Uporabna delovna površina 3100x1360 mm 2 delovni območji, 4 vpenjalna območja Avtomatski sistem centralnega mazanja Holzher programska oprema z navodili za uporabo Črpalka SIEMENS ELMO-L S22 2,35 kW Dodatni vakuum za šablonska dela ali dodatne vpenjalne naprave Dobro stanje. Na voljo takoj iz zaloge. Fodpfx Absi U Dxujvopd

Stanje: rabljeno, Število vreten: 10 kos. Fedpow H Iv Tofx Abvopd Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Vreteno 2: desno / 11 kW / 40 mm Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Stanje: dober (rabljeno), Leto izdelave: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel size (thickness 20 mm): 2340 x 1240 mm Working chamber height: 60 mm Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (upward closing movement) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Double loading table Fpsdpfx Ajtwba Sjbvjd

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 690924, Connected load 380V 1.84 kW Speed 2840 rpm Number of spindles: 21 pcs, 32 mm pitch Spindle distance 640 mm Spindle rotation direction: 11 right-hand, 10 left-hand, M10 thread 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Fpedpoh U Damofx Abvod Unfortunately, we are unable to respond to inquiries without complete contact information.

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vacuum Membrane Press Wemhöner Type VARIOPRESS Model Basic 1000 S Technical Specifications: Heating Plate Size (mm): 2850 x 1550 Fpjdpfx Abjv Np H Hjved Electric Heating Plate Design: Aluminium heating plate on top Total Pressing Force (kN): 2400 Max. Chamber Pressure (bar): 6 Max. Operating Temperature: 180 degrees Celsius Max. Batch or Workpiece Size (mm): approx. 2460 x 1180 Thermoplastic Film in Roll Form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Press Chamber Height (mm): up to max. 180 Connection Data: Installed Power (kW): approx. 46 Required Air Pressure (bar): approx. 8

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: A1711012, Pos.1 VEN CLEAN Smart Dust Removal Unit Compressed air dust removal system for cleaning workpieces to be painted, removing dust from profiled workpiece surfaces. Five rotating air blast stars are installed. These detach the dust from the surface. The loosened dust is extracted on both sides by suction ducts. An external extraction system must be provided by the customer. Technical Specifications: Length: 2,060 mm Fpjdpfeu U Ryysx Abvsd Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization as jet rod (non-EX) with compressed air nozzles, compressed air consumption 840 NL/min Pos. 2 VEN SPRAY Comfort Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of construction: 2017 - Length: 4,350 mm - Working height approx. 930 mm ±20 mm - Working width: 1,300 mm - Operator side: left - Price refers to refurbished machine - Current condition: machine not refurbished - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Continuously adjustable feed speed: approx. 2–6 m/min - With belt cleaning system featuring tungsten carbide scraper. Complete pre-equipment is available for subsequent installation of a second washer. - Gun control, Touch Screen CNC7000 - Installed color circuits: 1 pc. (optionally expandable) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Voltage, Hz: 400 / 50 - Color: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer installation and commissioning of the system, as well as training for your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!

Stanje: novo, MAIN MACHINE FEATURES: -Single-head drilling machine for drilling at 0° to 90° -Pneumatically adjustable head angle -Cast iron fences -Spindles adapted for quick-change couplings -Patented pneumatic material clamps -Cast iron worktable -Fast and precise adjustment -High-precision drilling STANDARD MACHINE EQUIPMENT: -Two 1.5 m aluminium stops (right and left) with two position stops each -Five quick-release clamps Technical specifications: Fjdep Ecdgepfx Abvepd Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic clamps: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Spindle speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm