Kombiniran stroj FELDER BF6-26 -rabljen-

FELDER BF6-26

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet Godowrm Dtopfx An Usbt About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Postelja za varjenje visoke trdnosti Razdeljen sistem za odvod dima Popolnoma avtomatski sistem za vbrizgavanje maziva Popolnoma avtomatsko rezanje, varčevanje z materialom, velika hitrost Območje rezanja: 4000 × 2000 mm Pomik po osi X: 1520 mm Pomik po osi Y: 4020 mm Pomik po osi Z: 80 mm Maks. kombinirana pozicijska hitrost: 170 m/min Pospešek: 2,8 G Dimenzije stroja (D × Š × V): 9500 × 2900 × 2380 mm Tloris: 10500 × 3400 mm Neto teža: 8500 kg Gsdpfxew A Iilo An Usbt

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BELOW Equipment / further details: Gedpovf Iubsfx An Uebt With heating for embossing Also very interesting for the textile industry

Stanje: rabljeno, Ta naprava nanaša lepilo na zadnjo stran materiala, ki ga je treba lepiti. Anleimmaschine / Lepljenje stroj Tränklein AM500 Dvovaljni lepilni stroj Serijska št.: 2535 Delovna širina: 500 mm Delovna hitrost: 4 - 20 m/min Za hladno lepilo Gedpfeyq S Iysx An Usbt Spletni video pregled prek WhatsApp - MS Zoom - Telegram Na zalogi v Emskirchen/Nürnberg - Na voljo takoj - Možnost testiranja

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1300 x 2070 x 1135 mm Weight: 320 kg Total power requirement: 2.2 kW 5-in-1 Combination Machine K5 250-1300 Saw-Moulder-Surface Planer-Thicknesse-Mortiser Circular Saw: - Max. saw blade diameter: 254 mm - Saw blade bore: 30 mm - Speed: 4750 rpm - Saw blade tilting: 0°-45° - Max. cutting height at 90°/45°: 75/60 mm - Sliding table: 430 x 1300 mm - Motor power / input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Spindle Moulder: - Spindle diameter: 30 mm - Spindle speed: 6500 rpm - Spindle length: 80 mm - Max. spindle stroke: 80 mm - Max. table opening: 144 mm - Motor power / input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Surface Planer and Thickness Planer: - Cutter block diameter: 75 mm - Cutter block with 3 knives - Speed: 4000 rpm - Feed rollers diameter: 32 mm - Max. planing width: 250 mm - Max. stock removal, surface planer: 5 mm - Fence tilt: 0°-45° - Max. thicknessing width: 248 mm - Max. stock removal, thicknesser: 2.5 mm - Max. workpiece height, thicknesser: 190 mm - Feed speed: 8 m/min - Surface table size: 1085 x 256 mm Gbedpfx Aevz E Sien Ust - Thicknessing table size: 600 x 248 mm - Motor power output / input: 1.5 / 2.2 kW - Voltage: 400V / 50Hz - Dimensions: L=1300 mm, W=2070 mm, H=1135 mm - Table height: 850 mm - Weight: 320 kg

Stanje: zelo dobro (rabljeno), SICAR Forte 400 Thickness Planer Gedpfot Rp Hxsx An Uebt Working width: 400 mm Planing height: 300 mm Cutter block with traditional knives 4-knife cutter block Cutter block speed: 5,200 rpm Electric adjustment (raising/lowering) of the worktable Main motor power: 3 kW 3 feed speeds CE certificate

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, 1. Wyrówniarka (Jointer) – Szerokość wału: 260 mm – Długość stołów: 1560 mm 2. Grubościówka (Thickness planer) – Maksymalna grubość obrabianego elementu: 180 mm 3. Wiertarka (Drilling machine) – Maksymalna średnica narzędzia: 18 mm – Maksymalna głębokość wiercenia: 80 mm – Szerokość wiercenia: 140 mm – Stół regulowany w płaszczyznach góra/dół, przód/tył oraz bocznie 4. Piła tarczowa (Circular saw) – BRAK PIŁY (Saw blade not included) 5. Frezarka (Spindle moulder) Gbedpeqwg Efsfx An Uet – Średnica wrzeciona: 30 mm – Wrzeciono regulowane STAN I KOMPLETNOŚĆ JAK NA ZDJĘCIACH Condition and completeness as shown in the photos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 18.845 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 53 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 33.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: 828D, število osi: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018 and is designed for precision horizontal turning. The machine is ideal for complex machining tasks, ensuring robust performance and durability. If you are looking for high-quality turning capabilities, you should consider the DOOSAN Puma 2600 SY II that we have for sale. Contact us for further information. Additional Equipment • Mekiload gantry loader • Renishaw Equator • Renishaw Equator • The machine comes with a rotary indexing magazine • The machine is equipped with a portal robot Advantages of the Machine Qualitative Advantages • Tool change time: 1.0 second • Maximum speed (station): 5,000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump power: 1.5 kW Technical Advantages • Max. turning diameter over bed: 780 mm • Max. turning diameter over carriage: 630 mm • Max. turning length: 760 mm • Main spindle torque: 719 Nm • Spindle nose (main spindle): A2-8 • Sub spindle speed: 6,000 rpm • Sub spindle power (30 min): 18.2 kW • Sub spindle torque: 220 Nm Gsdpeyr R A Eefx An Ujbt • Spindle nose (sub): A2-5 • Number of stations: 24 (12 driven) Additional Information Machine is still under power

Stanje: dober (rabljeno), Leto izdelave: 1969, Wood band saw, band saw machine, band saw, vertical band saw - Manufacturer: Hema Paul & Gotthilf Heermann, vertical band saw - Model: unfortunately without model designation - Drive: 4 kW - Cutting width: max. 785 mm - Cutting height: max. 475 mm - Saw blade length: 5600 mm - Worktable: tiltable - Drive motor with brake - Dimensions: 1600/1020/H2430 mm Gjdpsh N Thwjfx An Usbt - Total weight: 794 kg

Stanje: rabljeno, Leto izdelave: 1989, Technical Details: Drilling capacity in steel (diameter): 28 mm Throat depth: 285 mm Drilling stroke: 165 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MT 3 Gbsdsu Idkzspfx An Ujt Spindle speed: 65 – 1,750 / 4x stepless rpm Feed: 0.1; 0.2; 0.3 manual/automatic mm/rev Max. spindle-to-table distance: 80 – 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 mm vertical Column diameter: Ø 130 mm Total power requirement: 7.5 kW Machine weight approx.: 273 kg Machine dimensions approx. LxWxH: 0.9 x 0.6 x 1.9 m The machine is capable of thread cutting. Direction of rotation (left/right) selectable via foot switch and/or depth stop. Table is swivelable and height-adjustable.