FBR ELPO P10 TURBO SESAČA

FBR ELPO P10

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Dsdsiyyf Iepfx Aplout Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Thermal input (GCV) (cooling): 43.5 kW Thermal input (GCV) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock! Dsdped Tiu Eefx Apleut

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), številka stroja/vozila: Reg Nr. 976, Machine designation: Used mixing dryer Manufacturer: AVA / Holland Merten GmbH Model: HTK 200 Dodpfxeitcvue Aplout Year of manufacture: 2002 Rotational speed: 107 rpm Material: Stainless steel Drive motor: 5.5 kW Version: EExdellCT4 Total capacity: 235 litres Product-contact parts: Stainless steel 1.4571 Gearbox: Helical geared motor Equipment: Double jacket, mechanical seal, shaft heating Dimensions: L 3400 x W 1100 x H 1500 mm Unladen weight: approx. 1,600 kg Technical documentation: available Notes: Operating temperature 130°C, design temperature 200°C, internal mixer pressure -1/+3 bar, double jacket pressure +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used, very good Price: on request

Stanje: zelo dobro (rabljeno), The plant essentially consists of: - 2 feeding units (walking floor bunkers) - 2 silos, each with 55 m³ capacity and discharge screws Djdpfx Aslxzl Ejplsut - 2 screw conveyors - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel twin-shaft extruders for processing woody biomass - 1 twin-shaft paddle mixer - Twin-shaft extruder for homogenization - Laboratory container with mixing and dosing equipment for liquid extracts

Stanje: dober (rabljeno), Comprising: - 3 tanks, 18,000 litres each - 3 tanks, 15,300 litres each - With walkway system - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manway DN 400 (cylindrical part) - Residual outlet, ball valve Ø 40 Friedrich No. 2 - Clear drain, ball valve Ø 40 Friedrich No. 2 - Sampling port Duodpsib H Ddjfx Aplst - Transfer line with ball valve Ø 40 Friedrich No. 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, fitted with a removable sieve cylinder insert (for keeping the mash cake moist) Dimensions: - 3 tanks, 18,000 litres: Ø 2000 mm, height 5600 mm - 3 tanks, 15,300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Product-contacting parts are made of stainless steel 1.4571, the remainder of the used mixer dryer is constructed from 1.4301. Machine designation: Used Continuous Horizontal Mixer Dryer Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of manufacture: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Design: EExdellCT4 Total capacity: 235 litres Product-contacting parts: stainless steel 1.4571 Features: double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Duodpfsitcu Ejx Aplot Empty weight: approx. 1,600 kg Technical documentation: Yes Note: Operating temperature 130°C, design temperature 200°C, mixing vessel internal pressure -1/+3 bar, double jacket pressure +6 bar Accessories: base frame Condition: used Price: on request

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), The ultrafiltration system is used for cleaning various liquids. The membrane elements feature a 37/3.8 channel design, 0.1 μm pore size, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods with a capacity of 2,000 L/h each. Duedpfxef Dc D Hj Aplet Scope of supply: 1 construction frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 pneumatic diaphragm pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, 1 control unit according to VDE 0110/0113 CE, 1 flow meter, and 1 pre-assembly of the system at the supplier’s factory.

Stanje: rabljeno, Leto izdelave: 2007, System: Mobile sludge dewatering plant, Decanter / Mobile centrifuge Manufacturer: Hiller Model: Solid bowl decanter centrifuge Duodpfx Apsvz Dnpslot Type: DP51 Machine No.: H3991 Year of manufacture: 2007 Max. permissible drum speed: 3,400 rpm Drum inner diameter: approx. 505 mm Drum material: ST52.0 Drum wall thickness: 13.0 mm Other features: Steel swap body with reinforced floor Accessories: Feed pump for sludge inlet, polymer dosing pump, polymer solution pump Polymer station: 2-chamber system for liquid polymers with agitator, adjustable Twin-shaft paddle mixer: galvanized steel Total weight: approx. 4,200 kg Purchase and rental available.

Stanje: zelo dobro (rabljeno), Malo rabljeni avtomatski stroji za izdelavo TC, TU, TZ profilov. Namenjeni izdelavi in valjanju TC, TU, TZ profilov do debeline kovine 1,5 mm. Tehnične specifikacije: Dusdpfx Aex Sx R Soplot Izdelano v Estoniji Nastavljiva višina profila: 100 – 250 mm Širina profila: 50 mm Zavihani rob profila: 15 mm Minimalna debelina valjane pločevine: 1 mm Maksimalna debelina valjane pločevine: 1,5 mm Razdalja med valji: 300 mm Mere stroja: 900 x 4000 mm Stroj nima giljotine in perforacijskih valjev. Upravljanje je preprosto – dva gumba. Če imate dodatna vprašanja, z veseljem odgovorimo.

Leto izdelave: 2016, obratovalne ure: 700 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 88-16-4043, Sigmet-2000V High Vacuum Coating Machine The system coats even the most complex 3D-shaped metal, glass, or plastic parts with aluminum, while producing an accurate, precise, and homogenous surface with an impressive finish. Total operating time of the machine: 700 hours Features: Djdpfxeuz Rcwe Apleut - Double door for high productivity - Precision drive system - Planetary drive for uniform coating - Vertical arrangement of substrate holders - Modular and flexible design - Glow pre-treatment using AC or DC - Glow pre-treatment using MF (40kHz) Typical applications: - Automotive industry, interior/exterior - Cosmetics - Household and furniture - Glass and bottles - General decoration - Lighting