Priklopnik sedeža z delovno ploščadjo

FAYMONVILLE Telemax Megatrailer - hydr. gelenkt

Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website.

Excerpt from the equipment list. Full specification available upon request.

EQUIPMENT:
* Gooseneck, approx. 4,100 mm long, with central beam
* Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10° and integrated hook-in strip for attaching loose aluminium access ramps
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the current platform length
* Technical fifth-wheel load: 18,000 kg
* Suitable for 4x2 and 6x2 tractor units
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables
* Technical axle load: 12,000 kg per axle
* Air suspension with lifting and lowering valve
* 235/75 R 17.5 3PMSF twin tires. Brand subject to availability
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic pump unit for controlling hydraulic functions. Without installation of supply ports on the tractor unit
* 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - the first three pairs lying flat (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN)
* 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 2 inch kingpin
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load approx. 50,000 kg
* Approx. 32 mm timber floor on gooseneck and platform, encased in aluminium omega profiles
* 10 pairs of recessed lashing rings, foldable outward, in the outer frame of the platform
* In front of the last axle and on the rear cross member of the semi-trailer, 1 pair of lashing rings each (LC 10,000 daN)
* All other lashing rings (LC 5,000 daN)
* 6 pairs of stake pockets recessed in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm
* 1 spare wheel holder under the loading platform, on the right in the direction of travel
Iiodey Augdjpfx Al Nja
* 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform, left side in direction of travel
* Bevel at the rear cross member of the vehicle, approx. 350 mm x 10°
* Integrated hook-in strip for loose aluminium access ramps at the rear cross member of the vehicle
* 1 pair of drop-in supports at the rear cross member
* Remote steered axles from the front and rear using cable remote control, with single-track axle alignment, no installation required in the tractor unit
* Round NATO socket at the front connector socket panel (Maeler & Kaege VG 96 917)
* 1 LED work light on each side, left and right, mounted on the front wall with wiring to the connector socket for the tractor unit
* On the extension an additional locking point every 500 mm
* Holder for plug-in stakes, for storage when not in use, inside the front wall of the gooseneck
* 4 wheel chocks with holder under the loading platform
* Galvanized, sliding width extensions, extendable by approx. 230 mm per side (without timber planks)
* 1 LED work light each side, left and right, in front of the axles with wiring to the connector socket for the tractor unit
* 2 axle load gauges mounted on the left-hand side including axle load diagram
* 1st axle with traction aid
* Mounts for warning signs under the gooseneck and at left and right on the rear cross member
* A

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.