Priklopnik sedeža z delovno ploščadjo

FAYMONVILLE MAX Trailer MAX210 Telesattel Megatrailer

You can find our complete stock of immediately and soon available vehicles on our website.

Excerpt from the equipment. Full equipment list available on request.

Loading platform
* Double-extendable design with pneumatically operated locking mechanism
* 2 pairs of recessed lashing rings (LC 5,000 daN)
* 1 pair of recessed lashing rings (LC 10,000 daN)
* 7 pairs of fold-out external lashing rings (LC 5,000 daN)
* 3 pairs of fold-out external lashing rings (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)

Landing legs
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)

Tyres
* 235/75 R 17.5 3PMSF

Axles
* BPW axles, hydro-mechanically forced steering
* Air suspension with lift and lower valve

Brake system
* In accordance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit

Steel construction
* Made from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Painting
* Premium and durable corrosion protection for the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc primer
* High-quality 2-component (2K) topcoat, single-color in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)
* Rims in silver

Including accessories
* Rear and front remote steering by cable remote control with push buttons, with axle tracking control (without installation in the tractor unit)
* Electro-hydraulic power pack
* 4 wheel chocks with holder on the front bulkhead
* 2-inch king pin
* At the galvanized connection bar at the front, yellow and red air couplings
* Yellow reflective tape as per EU regulations on the sides, extension, and rear of the trailer
* European reflective plates (red-yellow) at the rear of the trailer
* One mud flap at the rear of the trailer
* Manual and documentation on USB stick
* Loading platform with heavy-duty hardwood floor
* 10 pairs of stake pockets for plug-in stanchions (100 x 50 mm) in the outer frame of the loading platform
* Mounting bracket for a rotating beacon at the rear of the trailer
* Galvanized supports under the slope of the loading platform
* A mounting bracket for a rotating beacon at the rear of the trailer
* Mounting rail for aluminium loading ramps at the rear of the vehicle
* 80 km/h speed stickers on the rear and both sides
Djdpfxsk Ugacs Ag Nsku
* Load gauge for determining axle loads including load diagram
* Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
* Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection for the pumps
* Spiral cable to power the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with plug connection (NATO-NATO)
* Anti-slip sand layer painted on central beam
* 6 pairs of WADER container pockets in the loading floor, for 1 x 20' container, 2 x 20' containers or 1 x 40' container, additional locking point in the extension section for one 45' container
* 5 crosswise stake pocket bars mounted in the loading floor for plug-in stanchions 100 x 50 mm
* Space for up to 9 pairs of plug-in stanchions ca. 100x50 mm, inside front bulkhead
* One INOX toolbox, approx. 1,500 x 390 x 810 mm, under the loading platform on both left and right in the direction of travel
* Four warning signs, extendable b

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.