Priklopnik sedeža z delovno ploščadjoFAYMONVILLE
MAX Trailer MAX200 Telesattel
Priklopnik sedeža z delovno ploščadjo
FAYMONVILLE
MAX Trailer MAX200 Telesattel
Stanje
Rabljeno
Lokacija
Essen 

Prikaži slike
Prikaži karto
Podatki o stroju
Cena in lokacija
- Lokacija prodajalca:
- Heegstraße 6-8, 45356 Essen, Nemčija
Klic
Tehnične podrobnosti
- Skupna masa:
- 48.000 kg
- Največja dovoljena obremenitev:
- 37.535 kg
- Konfiguracija osi:
- 3 osi
- Prva registracija:
- 08/2024
- Naslednji pregled (TÜV):
- 08/2026
- Skupna širina:
- 2.540 mm
- Oprema:
- ABS
Podrobnosti ponudbe
- ID ponudbe:
- A20095995
- Št. reference:
- 33267
- Nazadnje posodobljeno:
- dne 30.09.2025
Opis
You can find our complete inventory of immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details available upon request.
Loading Platform:
* Extendable loading platform with pneumatically actuated locking mechanism
* 7 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN)
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0)
* Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually
* Axle tool
Tyres:
* Tyres 385/65 R 22.5
Braking System:
* Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit
Steel Structure:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Paintwork:
* Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red
* Silver rims
* Rear section metallised and painted in RAL 9010 (pure white)
Including the following additional equipment:
* Yellow-red air couplings at the galvanised front connection panel
* 4 wheel chocks with holders
* 2-inch kingpin
* Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer
* European reflector plates (red-yellow) at the rear of the trailer
* Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles
* 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area
* Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall
* 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel
* 1 mudflap at the rear of the trailer
* Manual and description on USB stick
* One bracket for a warning beacon at the rear of the trailer
* On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket
* 80 km/h speed label at rear and on both sides
* Load manometer for axle load determination including load diagram
* Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear
Fgsdpexgk U Nsfx Ah Doh
* Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel
* 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm
* Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status
* 2 LED reverse lights mounted on the rear panel
* HRM metallisation (High Resistance Metallisation)
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Excerpt from the equipment list. Full equipment details available upon request.
Loading Platform:
* Extendable loading platform with pneumatically actuated locking mechanism
* 7 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN)
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0)
* Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually
* Axle tool
Tyres:
* Tyres 385/65 R 22.5
Braking System:
* Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit
Steel Structure:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Paintwork:
* Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red
* Silver rims
* Rear section metallised and painted in RAL 9010 (pure white)
Including the following additional equipment:
* Yellow-red air couplings at the galvanised front connection panel
* 4 wheel chocks with holders
* 2-inch kingpin
* Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer
* European reflector plates (red-yellow) at the rear of the trailer
* Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles
* 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area
* Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall
* 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel
* 1 mudflap at the rear of the trailer
* Manual and description on USB stick
* One bracket for a warning beacon at the rear of the trailer
* On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket
* 80 km/h speed label at rear and on both sides
* Load manometer for axle load determination including load diagram
* Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear
Fgsdpexgk U Nsfx Ah Doh
* Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel
* 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm
* Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status
* 2 LED reverse lights mounted on the rear panel
* HRM metallisation (High Resistance Metallisation)
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2003
Pošlji zahtevo
Telefon & Faks
+49 201 8... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake