Priklopnik sedeža z delovno ploščadjo

FAYMONVILLE MAX Trailer MAX200 Telesattel Bordwände

Excerpt from the specification. Complete specification available on request.

Loading platform
- Extendable loading platform with pneumatically operated locking mechanism
- Loading platform with approx. 30 mm thick wooden floor, enclosed in omega profiles
- 10 pairs of foldable lashing rings (LC 2,500 daN)
- 7 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- Loading platform width approx. 2,480 mm

Landing legs
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)

Axles
- BPW air-suspended axles, equipped with disc brakes (approx. 430 mm), lift/lower function (ET 120)
- Self-steering axle with electromagnetic reversing lock, activated via reverse gear or manually
Axle tools

Tyres
- 385/65 R 22.5 tyres

Brake system
- Brake system compliant with EU regulations, equipped with EBS-E (2S2M), without interconnecting lines to the tractor unit

Paintwork
- Premium and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, single colour in RAL 3002 Carmine Red
- Rear end metalised and painted in RAL 9010 (Pure White)
Kdedpfxeya Shls Af Tjg

Including the following additional features:
- Yellow-red air couplings on the galvanised front connection strip
- 2" kingpin
- Yellow reflective tape in accordance with EU regulations on sides, extension, and rear of trailer
- European red-yellow reflective panels at the rear of the trailer
- Loading platform with approx. 30 mm thick wooden floor, enclosed in omega profiles
- Storage for approx. 1,000 mm long stake extensions in rear central beam
- 1 spare wheel holder on the left-hand side under the loading platform
- Mount for beacon at the rear of the trailer
- Mounts for warning signs including sockets on gooseneck and rear panel, both left and right
- Load gauge to determine axle loads, including load diagram
- Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
- Foldable aluminium drop sides with rear swing doors (anodised), approx. 600 mm high, with KINNEGRIP folding stanchions
- Holder for aluminium drop sides, under the loading platform before the axles
- Holder for KINNEGRIP stanchions, under the loading platform behind the axles
- 10 pairs of stake pockets for approx. 100 x 50 mm stanchions in the outer frame of the loading platform
- Impact protection on both sides of the rear crossmember
- 6 pairs of WADER container pockets in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container
- INOX toolbox, approx. 600 x 350 x 600 mm, on the left-hand side under the loading platform
- 4 pairs of stake pocket strips running longitudinally along the loading platform, for 100 x 50 mm stanchions
- Lift axle on the front axle, with control through TEBS E, depending on current axle load and loading condition
- Beacon holder on the warning signs
- Acoustic warning signal when reversing
- 2 LED reversing spotlights mounted on the rear panel
- HRM metallisation (High Resistance Metallisation) of the outer frame

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.